@Claymore and to everyone who are experience mining monero, Since I started in mining I only mined Eth algo, so I'm totally noob in mining monero type algo.. Needs some help to all experts here, I currently get 300H per card and I'm using RX 570 4gb and 8gb chopsuey mixed
Kindly look my bat.file
GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner.exe -xpool minexcash.com:3333 -xwal XCA1doMAAhPcceq45PwGjgc3VBGVinhLidsgsNhoPyaQADWPhhj6AoeDFfbjpu4JBpFzJFy2r2reZCcLwtKR7cEo4BUA46g71M.Miner1 -xpsw x -pow7 1 -dmem 1 -li 0 -allpools 1 -tt 65 -fanmin 55 -fanmax 90 -cclock 1088 -mclock 1200 -cvddc 850 -mvddc 850
Is it correct or need to adjust something, yes of course my config is a kind of S*** lol! Hope somebody here share with me a working config for my cards..
Thanks a lot!
Your hashrate look a bit too low for a RX570. I've not used a RX570 but on a RX470 (which should be similar to a RX570) I can get around 750 h/s mining Monero.
The low hashrate you have could be due to an unmodded BIOS - is it modded ?
One thing to try out is to just start with the most basic config then add, and tweak, one option at a time.
I use OverdriveNtool for setting clock and voltage values and not Claymores options.
The only real difference between your config and the one I use is that I use the option "-h" (set to "-h 1024" for a 8GB RX470) but only with mixed cards, the default is usually OK.
"-h number of hashes that GPU processes during one round. If not specified, default value is used. For many cases you can increase performance by adjusting this parameter value. For example, "-h 832" means HashCnt=832 for all cards. You can also specify values for every card, for example "-h 640,832,1376,0", zero value means autoselection. "
