Claymore's CryptoNote AMD GPU Miner v11.3 - page 28.

rhaegonz

newbie

Activity: 64

Merit: 0

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

Try setting -dmem to 0 or lowering -h from default value (i think it's 8xx)

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

10 merits for Claymore for making this miner completely free, good going

bobben2

full member

Activity: 279

Merit: 104

Quote from: hunghcm on April 08, 2018, 10:19:33 AM

Quote from: bobben2 on April 08, 2018, 09:03:42 AM

Quote from: hunghcm on April 08, 2018, 07:10:47 AM

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

Can you give me the detail of config, thanks ?

Sure,
this is my command line

NsGpuCNMiner.exe -pow7 1 -h 928 -dmem 1 -xpool stratum+ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal bobben.%computername% -xpsw %computername%

The above -h value is for 4 gig cards. If you hasve 8 gig cards, then you can set that value higher.

I use OverdriveNTool to set gpu core clock (P7) to 1150 and mem (P2) to 2000.

Many thanks for your feedback. Because my rigs can not run with algo -pow7 1

Update :
With your config, still getting error : Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Sumohasforkedtonewalgo.YoushoulduseXMRig2.6orXMR-Stak2.4.2."}}

Trying to mine Sumo? Claymore 11.3 does not support CN Heavy.
Look here to find a miner that can mine you Sumokoin.
https://bitcointalksearch.org/topic/guideamdnvidiacpuetnhow-to-mine-electroneum-miners-downloads-2345911
Actually, the pool is very good here. It suggests to you which miner to use.

hunghcm

newbie

Activity: 49

Merit: 0

Quote from: bobben2 on April 08, 2018, 09:03:42 AM

Quote from: hunghcm on April 08, 2018, 07:10:47 AM

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

Can you give me the detail of config, thanks ?

Sure,
this is my command line

NsGpuCNMiner.exe -pow7 1 -h 928 -dmem 1 -xpool stratum+ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal bobben.%computername% -xpsw %computername%

The above -h value is for 4 gig cards. If you hasve 8 gig cards, then you can set that value higher.

I use OverdriveNTool to set gpu core clock (P7) to 1150 and mem (P2) to 2000.

Many thanks for your feedback. Because my rigs can not run with algo -pow7 1

Update :
With your config, still getting error : Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Sumohasforkedtonewalgo.YoushoulduseXMRig2.6orXMR-Stak2.4.2."}}

asb1321

newbie

Activity: 19

Merit: 0

Hi there,

Since I have downloaded the new version it works perfectly untill I start CPU miner and all of sudden rig crashes, even if I start afterburner or crimson it crashes.

Anyone has any idea why? I did try to reduce clocks but still it crashes.

Regards

rambetiko

member

Activity: 189

Merit: 10

what is vega64 hashrate wtih claymore?

bobben2

full member

Activity: 279

Merit: 104

Quote from: hunghcm on April 08, 2018, 07:10:47 AM

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

Can you give me the detail of config, thanks ?

Sure,
this is my command line

NsGpuCNMiner.exe -pow7 1 -h 928 -dmem 1 -xpool stratum+ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal bobben.%computername% -xpsw %computername%

The above -h value is for 4 gig cards. If you hasve 8 gig cards, then you can set that value higher.

I use OverdriveNTool to set gpu core clock (P7) to 1150 and mem (P2) to 2000.

ejonesss

newbie

Activity: 3

Merit: 0

i tried to download from mega but it sais i need flash (a very insecure platform) so i tried google drive

google drive said the files was a virus

i found a workaround you have to copy to your drive then download.

chrome may say it is infected click keep infected fiile.

it may be because i am using an older version of chrome on osx 10.7.5

the suggestion: you may want to try double zipping or even triple zipping (file.zip.zip file.zip.zip.zip)

password protect the downloads and post the password*

*= i just read on google that password protecting may not work as some programs may be able to see through encryption.

you could pack it in an installer package and encrypt that.

kemo6600

member

Activity: 130

Merit: 10

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

Check previous post , play with -h and -dmem parameter

Quote from: agtprvctr on September 29, 2017, 03:37:34 PM

Quote from: Claymore on September 29, 2017, 02:28:34 PM

This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.

Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.

Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s

Thanks Claymore!

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: telep on April 08, 2018, 05:10:46 AM

Quote from: Ursul0 on April 08, 2018, 04:51:35 AM

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

yep. I've got this too:

Code:

GpuMiner dk2an0 failed -4

will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )

In my case, im using 950 mv, and low core speed (1150mhz) but same error...

its possible other reasons?

Guys, have you tried -dmem 0 in your config

I see this error before and were solved with this

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: telep on April 08, 2018, 03:52:45 AM

This is a present for you, a complete guide step by step to tune up your rigs: https://mining.help
It´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings.

nice guide. lot of detail.

sent you a merit and an eth tip to the addy in your guide. tx details in a pm.

nitrobg

member

Activity: 413

Merit: 17

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

SRBMiner does 900-950 with 1% fee. You should try it.

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Im kinda jealous you are getting 400 amps hahahaha. Have fun

Btw I just installed an attic gable fan from quietcool, with auto thermostat and 10 speed auto change to extract air from my garage. I am pretty impressed actually. although its really expensive its super quiet and moves a lot of air. For me being quiet is factor number 1. Good luck in the remodel. For everyone else here, although there is a fee, may I kindly suggest checking out Zawawa's gateless gate sharp. Its still in dev but its pretty awesome. Havent compared speeds with claymore though.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Query about shares and hashrate.

I've 2 cards a R9 270x 2GB and a RX 470 4GB, but I get less shares for the RX 470, should I not get a lot more shares with the RX 470, what's going on ?

Here are the figures, mining Stellite (XTL).

Card Hashrate Shares Run Time
R9 270x 2GB 474 h/s 531 shares 4 hours
RX 470 4GB 852 h/s 486 shares 4 hours

Thanks.

hunghcm

newbie

Activity: 49

Merit: 0

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

Can you give me the detail of config, thanks ?

leo.sparrow

newbie

Activity: 8

Merit: 0

Quote from: OhMyHolyToken on April 07, 2018, 01:49:02 PM

We need Crypto-heavy.

+

telep

newbie

Activity: 13

Merit: 1

Quote from: Ursul0 on April 08, 2018, 04:51:35 AM

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

yep. I've got this too:

Code:

GpuMiner dk2an0 failed -4

will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )

In my case, im using 950 mv, and low core speed (1150mhz) but same error...

its possible other reasons?

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

yep. I've got this too:

Code:

GpuMiner dk2an0 failed -4

will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )

dmwardjr

legendary

Activity: 1302

Merit: 1318

Technical Analyst/Trader

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

I can't get my 480's and 580's to work either. Only 3 or 4 cards of the 7 card rigs will work then it quits. R9 380's and R9 390's work fine.

I'm trying Cast XMR Miner now but can only get ONE card to work with it and none of the other cards show up.

telep

newbie

Activity: 13

Merit: 1

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 28. (Read 2145055 times)