Claymore's CryptoNote AMD GPU Miner v11.3 - page 30.

Lio78

newbie

Activity: 35

Merit: 0

Quote from: Moraen on April 07, 2018, 12:34:42 AM

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

Me too, any solution?

Thank's

Moraen

newbie

Activity: 1

Merit: 0

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

hack4love

newbie

Activity: 152

Merit: 0

what is the best wallat for Monero Fork i need something like myetherwallet.com

Ray69

newbie

Activity: 39

Merit: 0

Quote from: STAT303954 on April 06, 2018, 01:55:08 PM

Quote from: Ray69 on April 06, 2018, 09:17:24 AM

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Thanks, I installed castXmr and backup to speed Grin

What will the Network hashrate show soon I wonder Huh

STAT303954

newbie

Activity: 19

Merit: 0

Quote from: Ray69 on April 06, 2018, 09:17:24 AM

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: Jaknip on April 06, 2018, 01:22:44 PM

Quote from: Marvell2 on April 06, 2018, 11:56:26 AM

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

Have you tried other pools to see the rejection rate?

dont see rejected shares on nanopool

jcpham

full member

Activity: 165

Merit: 100

Your Argument is Irrelephant

Quote from: dirton on April 06, 2018, 01:27:44 PM

Quote from: jcpham on April 06, 2018, 01:21:23 PM

add

-pow7 1

on latest version of software. but your card is older than mine!

Unfortunately same 0 H/s Sad

Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

same problem here! xmrig sucks, been using claymore 9.3 FOREVER.
New version of Claymore don't have an OpenCL .bin supporting the old cards.

xmrig is the only thing I can get work on new POW and old GPUs Sad

dirton

newbie

Activity: 19

Merit: 0

Quote from: jcpham on April 06, 2018, 01:21:23 PM

add

-pow7 1

on latest version of software. but your card is older than mine!

Unfortunately same 0 H/s Sad

Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs.

Jaknip

newbie

Activity: 20

Merit: 0

Quote from: Marvell2 on April 06, 2018, 11:56:26 AM

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

Have you tried other pools to see the rejection rate?

jcpham

full member

Activity: 165

Merit: 100

Your Argument is Irrelephant

add

-pow7 1

on latest version of software. but your card is older than mine!

Quote from: dirton on April 06, 2018, 12:11:50 PM

Any ideas hot to make latest version supporting today's hard fork to mine on Radeon HD 5870? Everything start fine, but 0 H/s is all what I get. Sad

Code:

AMD Cards available: 1
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'pool.supportxmr.com' <91.121.140.167> port 5555 (unsecure)
XMR: Stratum - Connected (pool.supportxmr.com:5555) (unsecure)
GPU0 t=29C fan=21%

GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
Pool switches: XMR - 0
Current XMR pool share target: 0x00068db8 (diff: 10000H)
GPU0 t=26C fan=21%

dirton

newbie

Activity: 19

Merit: 0

Any ideas hot to make latest version supporting today's hard fork to mine on Radeon HD 5870? Everything start fine, but 0 H/s is all what I get. Sad

Code:

AMD Cards available: 1
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'pool.supportxmr.com' <91.121.140.167> port 5555 (unsecure)
XMR: Stratum - Connected (pool.supportxmr.com:5555) (unsecure)
GPU0 t=29C fan=21%

GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
Pool switches: XMR - 0
Current XMR pool share target: 0x00068db8 (diff: 10000H)
GPU0 t=26C fan=21%

Marvell2

full member

Activity: 1148

Merit: 132

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

D1kiy

newbie

Activity: 3

Merit: 0

Quote from: The Hitman on April 06, 2018, 09:08:56 AM

Quote from: D1kiy on April 06, 2018, 05:13:01 AM

Hi,

I have issue with fans control using this miner.
If I specify target temperature (-tt 50), fans speed just jumps to max when temperature is more than specified and then drops to 0.
And even if I specify fans speed (-tt -50), they do not work constantly at this speed, but also periodically turn off and on again. How to solve this problem?
My rig is 8 x RX574 on Windows 10 with latest Adrenaline drivers.

Thank you in advance!

I had the same problem on RX480. Tried all drivers. One or two cards fans hit 100% after some time, and only reboot calms them down. It turns put its a driver problem and its still not fixed. One solution i found is to not turn on Afterburner at all on startup. If i dont use afterburner then im good. Havent tried with other tools

I do not use any other software. And I do not have this problem with Claymores dual miner. That's weird why these miners work different way with drivers.

Larvitar

jr. member

Activity: 196

Merit: 1

sir Claymore, can you see the Cryptonight-Heavy algorithm, is the new Sumokoin pow algorithm

jcpham

full member

Activity: 165

Merit: 100

Your Argument is Irrelephant

NO LOVE FOR OLD BITCOIN MINERS I SEE! WHY CAN'T I MINE MONERO ON RADEON 6950's !?!?! THEY WERE GOOD ENOUGH FOR SATOSHI!!!!!!!

OpenCL initializing...
AMD Cards available: 2
GPU #0: Cayman (AMD Radeon HD 6900 Series), 2048 MB available, 22 compute units
(pci bus 4:0:0)
GPU #0 recognized as Radeon 6950
GPU #1: Cayman (AMD Radeon HD 6900 Series), 2048 MB available, 22 compute units
(pci bus 11:0:0)
GPU #1 recognized as Radeon 6950
POOL version
No ASM binary found for GPU 0
No ASM binary found for GPU 1
GPU #0 algorithm ASM, -h 704, -dmem 0 (Memory used: 1443MB)
GPU #1 algorithm ASM, -h 704, -dmem 0 (Memory used: 1443MB)
Total cards: 2
OpenCL error 0 #101 - -61, cannot create GPU memory buffer
OpenCL error 0 #101a - -61, cannot create GPU memory buffer
OpenCL error 1 #101 - -61, cannot create GPU memory buffer
OpenCL error 1 #101a - -61, cannot create GPU memory buffer

Ray69

newbie

Activity: 39

Merit: 0

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

The Hitman

newbie

Activity: 17

Merit: 0

Quote from: D1kiy on April 06, 2018, 05:13:01 AM

Hi,

I have issue with fans control using this miner.
If I specify target temperature (-tt 50), fans speed just jumps to max when temperature is more than specified and then drops to 0.
And even if I specify fans speed (-tt -50), they do not work constantly at this speed, but also periodically turn off and on again. How to solve this problem?
My rig is 8 x RX574 on Windows 10 with latest Adrenaline drivers.

Thank you in advance!

I had the same problem on RX480. Tried all drivers. One or two cards fans hit 100% after some time, and only reboot calms them down. It turns put its a driver problem and its still not fixed. One solution i found is to not turn on Afterburner at all on startup. If i dont use afterburner then im good. Havent tried with other tools

4ward

member

Activity: 473

Merit: 18

Quote from: OhMyHolyToken on April 06, 2018, 08:15:24 AM

Doesn't work well with https://sumo.fairpool.xyz. Pool report 5-10 times less hashrate than miner, even with 0% rejected.

perhaps because it doesnt suport cryptonote-heavy?
check the pool page for supported miners

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

Doesn't work well with https://sumo.fairpool.xyz. Pool report 5-10 times less hashrate than miner, even with 0% rejected.

D1kiy

newbie

Activity: 3

Merit: 0

Hi,

I have issue with fans control using this miner.
If I specify target temperature (-tt 50), fans speed just jumps to max when temperature is more than specified and then drops to 0.
And even if I specify fans speed (-tt -50), they do not work constantly at this speed, but also periodically turn off and on again. How to solve this problem?
My rig is 8 x RX574 on Windows 10 with latest Adrenaline drivers.

Thank you in advance!

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 30. (Read 2145043 times)