^^^ I'm not sure what you guys are smoking but my rx480/580s went from 995 to 1015 xmr. Fix your -h values, 896 for 4gb cards, double that for 8gb.
One dude was spamming screen shots of his asus 480 doing over 2k xmr!!!!!!
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 57. (Read 2145056 times)
that awkward moment when you get 425 H/s compared to 790 H/s on version 10.2
I get 425 H/s compared to 790 H/s on version 10.2 on my RX570 rig, how can I fix it?
Using the latest Catalyst version. Do I need to downgrade to Catalyst v15.12?
Im testing it to see but so far so good. Not a huge gain though
10.2
Four R9 290's (i know) all over clocked a bit
Sapphire Vapor-X ~850h/s
Sapphire Tri-X ~850h/s
2x PNY ~815h/s
v11
Vapor-X ~875h/s
Tri-X 855h/s
2x PNY ~830h/s
Not a huge gain but not bad for the same default settings and same overclocks except for the Tri-X.
The Tri-X with the same overclock as on 10.2 was only giving ~750H/s. Upped it 50 clock and 50mem and it shot up to the 855H/s. Figured Ill run a bit of a stability test on it before pushing any further
.
Not a huge gain but hey cant complain about more hash power
10.2
Four R9 290's (i know) all over clocked a bit
Sapphire Vapor-X ~850h/s
Sapphire Tri-X ~850h/s
2x PNY ~815h/s
v11
Vapor-X ~875h/s
Tri-X 855h/s
2x PNY ~830h/s
Not a huge gain but not bad for the same default settings and same overclocks except for the Tri-X.
The Tri-X with the same overclock as on 10.2 was only giving ~750H/s. Upped it 50 clock and 50mem and it shot up to the 855H/s. Figured Ill run a bit of a stability test on it before pushing any further
.
Not a huge gain but hey cant complain about more hash power
Worth to test it on vega ?
Some did but didn't share their settings. Interesting to see
Worth to test it on vega ?
the new version gave 3700 hashes instead of 3400 on the previous one, approximately, will be test for stability
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Samsung Memory with uber-mix 3.1 straps @ 2000mhz can achieve that easily.
Got my Power Color Red Dragon @ 1350/2000, doing 1030h/s
Those uber-mix 3.1 straps are good but my memory errors are high.
What settings do I need to change to reduce ?
ok - I upped the core speed to 1350 and I'm up to 1000 H/s!!
Ahhhhhhhhhhhhhh - messed up a firmware upgrade but have recovered from that now.
However -I now have the following errors :-
GPU 3, GpuMiner dk1a failed -52
GPU 1, GpuMiner dk1a failed -52
GPU 0, GpuMiner dk1a failed -52
GPU 2, GpuMiner dk1a failed -52
Helppppp!
All fixed, I think MS Windows reverted some on Claymore files. So I re-installed and all is good!
Will try again tomorrow with the Uber straps!
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Samsung Memory with uber-mix 3.1 straps @ 2000mhz can achieve that easily.
Got my Power Color Red Dragon @ 1350/2000, doing 1030h/s
Those uber-mix 3.1 straps are good but my memory errors are high.
What settings do I need to change to reduce ?
ok - I upped the core speed to 1350 and I'm up to 1000 H/s!!
Ahhhhhhhhhhhhhh - messed up a firmware upgrade but have recovered from that now.
However -I now have the following errors :-
GPU 3, GpuMiner dk1a failed -52
GPU 1, GpuMiner dk1a failed -52
GPU 0, GpuMiner dk1a failed -52
GPU 2, GpuMiner dk1a failed -52
Helppppp!
I tried a lot of options, but I cant achieve more than 860h, maybe it's because of memory hynix (with samsung memory peoples report 1000h+), I'll have to go back to SG miner. RX 580 8gb with Hynix have 970h. 
I cant get SGminer to work, it starts up but the cards don't seem to do any work (0H/s)
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Samsung Memory with uber-mix 3.1 straps @ 2000mhz can achieve that easily.
Got my Power Color Red Dragon @ 1350/2000, doing 1030h/s
Those uber-mix 3.1 straps are good but my memory errors are high.
What settings do I need to change to reduce ?
ok - I upped the core speed to 1350 and I'm up to 1000 H/s!!
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Samsung Memory with uber-mix 3.1 straps @ 2000mhz can achieve that easily.
Got my Power Color Red Dragon @ 1350/2000, doing 1030h/s
Those uber-mix 3.1 straps are good but my memory errors are high.
What settings do I need to change to reduce ?
Is it really fundamental to flash the bios of the cards?I ve just set up a 6x xfx rx580 8gb rig..
I get about 170m/hs on eth and 3500mh/s on sia Coin..
No issues or stops in 4 days.. Any way to improve?
Power consumption around 900w..
I just notice that one card is 15% slower than the other ones..
I get about 170m/hs on eth and 3500mh/s on sia Coin..
No issues or stops in 4 days.. Any way to improve?
Power consumption around 900w..
I just notice that one card is 15% slower than the other ones..
This is the Cryptonote miner's topic. The ETH dual is on that way --> https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925
Is it really fundamental to flash the bios of the cards?I ve just set up a 6x xfx rx580 8gb rig..
I get about 170m/hs on eth and 3500mh/s on sia Coin..
No issues or stops in 4 days.. Any way to improve?
Power consumption around 900w..
I just notice that one card is 15% slower than the other ones..
I get about 170m/hs on eth and 3500mh/s on sia Coin..
No issues or stops in 4 days.. Any way to improve?
Power consumption around 900w..
I just notice that one card is 15% slower than the other ones..
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Samsung Memory with uber-mix 3.1 straps @ 2000mhz can achieve that easily.
Got my Power Color Red Dragon @ 1350/2000, doing 1030h/s
11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs
"10.2 getting 580 1000hs" - wow what bios mod did you use?
Thanks a lot, man here is what I got with V11.00
Both dual mine XMR and FCN
2 x Sapphire Nitro + RX 580 4GB (overclocked with stock bios)
XMR: 12/20/17-07:17:43 - New job from fcn-xmr.pool.minergate.com:45590
1204 target: 0x00057744 (diff: 11990H)
1204 XMR - Total Speed: 1390 H/s, Total Shares: 4095, Rejected: 0, Time: 11:30
1204 XMR: GPU0 696 H/s, GPU1 694 H/s
Compared to 550 H/s average per GPU in V 9.7 (did not use V10.2)
AND:
2 x Sapphire Nitro + RX 580 8GB (overclocked with stock bios)
XMR: 12/20/17-00:17:39 - New job from fcn-xmr.pool.minergate.com:45590
1520 target: 0x0004f01b (diff: 13272H)
1520 XMR - Total Speed: 1619 H/s, Total Shares: 1044, Rejected: 0, Time: 02:38
1520 XMR: GPU0 804 H/s, GPU1 815 H/s
Compared to 750 H/s average per GPU in V 9.7 (did not use V10.2)
Both dual mine XMR and FCN
2 x Sapphire Nitro + RX 580 4GB (overclocked with stock bios)
XMR: 12/20/17-07:17:43 - New job from fcn-xmr.pool.minergate.com:45590
1204 target: 0x00057744 (diff: 11990H)
1204 XMR - Total Speed: 1390 H/s, Total Shares: 4095, Rejected: 0, Time: 11:30
1204 XMR: GPU0 696 H/s, GPU1 694 H/s
Compared to 550 H/s average per GPU in V 9.7 (did not use V10.2)
AND:
2 x Sapphire Nitro + RX 580 8GB (overclocked with stock bios)
XMR: 12/20/17-00:17:39 - New job from fcn-xmr.pool.minergate.com:45590
1520 target: 0x0004f01b (diff: 13272H)
1520 XMR - Total Speed: 1619 H/s, Total Shares: 1044, Rejected: 0, Time: 02:38
1520 XMR: GPU0 804 H/s, GPU1 815 H/s
Compared to 750 H/s average per GPU in V 9.7 (did not use V10.2)
update, i sorted the second the second part of my query Error: wallet failed to connect to daemon: http://localhost:26968. Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address.
Any input regarding the first would be great.
Any input regarding the first would be great.
Pool had a database crash, so all statistics and 1 hour worth of mining was lost.
that awkward moment when you get 425 H/s compared to 790 H/s on version 10.2
V11 increased hashrate with 5% for me. Power usage from the wall increased with 4.30%. Good trade off 
Just throwing the question out there as my clients are asking me:
Is there any NVIDIA love coming for your CryptoNote?
Is there any NVIDIA love coming for your CryptoNote?
Jump to: