Claymore's CryptoNote AMD GPU Miner v11.3 - page 58.

chafer99

member

Activity: 99

Merit: 10

Quote from: carafleur on December 19, 2017, 07:58:27 PM

Hello,

here's what I got with v11:

Code:

GPU #0: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #1: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #2: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #3: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #4: Hawaii : Sapphire R9 290 RefBoard 4GB ; 1040c;1250m ; 805 H/s
GPU #5: Hawaii : Sapphire R9 290 Dual OC 4GB ; 1120c;1500m ; 890 H/s
GPU #6: Hawaii : Sapphire R9 290 RefBoard 4GB ; 1040c;1250m ; 710 H/s
GPU #7: Tahiti : MSI 280X 3GB ; 1170c;1500m ; 555 H/s

-di 01234567 -h 512,512,512,512,640,640,640,384 -dmem 1 -tt 74 -ttli 79 -tstop 83 -fanmax 95 -fanmin 40,40,40,40,60,50,60,40
-cclock 1120,1120,1120,1120,1040,1160,1040,1170 -mclock 1600,1600,1600,1600,1250,1500,1250,1500

XMR - Total Speed: 5176 H/s, Total Shares: 69, Rejected: 0, Time: 00:17
XMR: GPU0 556 H/s, GPU1 557 H/s, GPU2 553 H/s, GPU3 557 H/s, GPU4 804 H/s, GPU5 887 H/s, GPU6 708 H/s, GPU7 554 H/s
DevFee: stop mining and disconnect

Thank you Claymore !

My R-380´s, -h 512 -dmem 1 (default), driver crashed (17.11.whql).
-h 448 -dmem 1 (1050/1600Mhz) - 680h/s(Samsung), 560h/s(Elpida).

Minero57

newbie

Activity: 4

Merit: 0

Well that was disappointing..

My RX 480 8GB is getting 2.53% lower hashrate on v11.0 compared to v10.2

optimal setting
v10.2 -h 1024, -dmem 1
v11 -h 512 , -dmem 1

Anyone getting better results with their RX 480 8GB?

~edit
I got the Sapphire Nitro version

new24core

member

Activity: 413

Merit: 17

Quote from: Soliqesh on December 19, 2017, 06:02:07 PM

I tried a lot of options, but I cant achieve more than 860h, maybe it's because of memory hynix (with samsung memory peoples report 1000h+), I'll have to go back to SG miner. RX 580 8gb with Hynix have 970h. Cry

Where is the best place to get sgminer as so much information online...

I am trying version 5.5 - is this right one to use ?

Also it is has been ages since I have used sgminer, what setting for a 580 ?

Unclegogi

newbie

Activity: 44

Merit: 0

Good job, Claymore!

V11.0 is much better for Vegas than V10.2.
V10.2 was ~30% slower than cast/stak.
V11.0 is ~15% slower with default settings and ~10% slower with best manual settings.

Got 1720-1770Hash/s now on Vegas 56/64.

Waiting for next version...

carafleur

member

Activity: 113

Merit: 10

[email protected]

Hello,

here's what I got with v11:

Code:

GPU #0: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #1: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #2: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #3: Tonga : Sapphire Nitro 380x 4GB ; 1120c;1600m ; 555 H/s
GPU #4: Hawaii : Sapphire R9 290 RefBoard 4GB ; 1040c;1250m ; 805 H/s
GPU #5: Hawaii : Sapphire R9 290 Dual OC 4GB ; 1120c;1500m ; 890 H/s
GPU #6: Hawaii : Sapphire R9 290 RefBoard 4GB ; 1040c;1250m ; 710 H/s
GPU #7: Tahiti : MSI 280X 3GB ; 1170c;1500m ; 555 H/s

-di 01234567 -h 512,512,512,512,640,640,640,384 -dmem 1 -tt 74 -ttli 79 -tstop 83 -fanmax 95 -fanmin 40,40,40,40,60,50,60,40
-cclock 1120,1120,1120,1120,1040,1160,1040,1170 -mclock 1600,1600,1600,1600,1250,1500,1250,1500

XMR - Total Speed: 5176 H/s, Total Shares: 69, Rejected: 0, Time: 00:17
XMR: GPU0 556 H/s, GPU1 557 H/s, GPU2 553 H/s, GPU3 557 H/s, GPU4 804 H/s, GPU5 887 H/s, GPU6 708 H/s, GPU7 554 H/s
DevFee: stop mining and disconnect

Thank you Claymore !

CryptoZoo

newbie

Activity: 7

Merit: 0

update, i sorted the second the second part of my query Error: wallet failed to connect to daemon: http://localhost:26968. Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address.

Any input regarding the first would be great.

wudafuxup

full member

Activity: 391

Merit: 105

Quote from: jamfro on December 19, 2017, 04:07:50 PM

2000 on vega hmm, just tried it on mine getting like 1100. Would anyone share there settings that get them over 2000? Thanks

Literally every single miner BUT claymore can hit 2000+ on vega. Just use cast XMR or XMR stak until he decides to fix it.

CryptoZoo

newbie

Activity: 7

Merit: 0

Hi all,

I have been mining non stop for a few weeks now on the pool.electroneum.space pool.
I went to check my balance on the website and I have around 10 + days of missing transactions /payments and my balance is down by quite a bit.
I last checked around a week ago and all seemed well, and the miner has been running the whole time.

Anybody have any ideas as to what might have happened?

Also I went to check my paper wallet balance and get this error...
Error: wallet failed to connect to daemon: http://localhost:26968. Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address.

Any ideas?

Cheers

Soliqesh

newbie

Activity: 48

Merit: 0

I tried a lot of options, but I cant achieve more than 860h, maybe it's because of memory hynix (with samsung memory peoples report 1000h+), I'll have to go back to SG miner. RX 580 8gb with Hynix have 970h. Cry

Asgaroth

newbie

Activity: 49

Merit: 0

Quote from: Soliqesh on December 19, 2017, 04:26:06 PM

No, I meant the value of -h. I didnt find a solution to this problem.

Ahh, no worries, I misunderstood you there.

I tried playing with the -h settings, where -h = 1152 (default), I get:

Code:

GPU #0 algorithm ASM, -h 1152, -dmem 1 (Memory used: 4722MB)
GPU #1 algorithm ASM, -h 1152, -dmem 1 (Memory used: 4722MB)

XMR - Total Speed: 1734 H/s, Total Shares: 1, Rejected: 0, Time: 00:00
XMR: GPU0 865 H/s, GPU1 869 H/s

If I try to get claymore to use more memory, then the hash rate slows down:

Code:

GPU #0 algorithm ASM, -h 1925, -dmem 1 (Memory used: 7892MB)
GPU #1 algorithm ASM, -h 1925, -dmem 1 (Memory used: 7892MB)

XMR - Total Speed: 1697 H/s, Total Shares: 3, Rejected: 0, Time: 00:01
XMR: GPU0 847 H/s, GPU1 850 H/s

How would you work out this "sweet spot", I think I need to do some more reading on the OP...

uDwcHYO

full member

Activity: 363

Merit: 100

so it makes sense to update the previous or new version less stable, quite different reviews for the version with improvements

dudee

member

Activity: 99

Merit: 10

11.0 rx570/580 unstable on 10.2 oc settings, lowered oc, sometimes shows gpu -100hs lower, sometimes after restart 1-2of 6 gpu shows 0hs.
10.2 getting 580 1000hs and 570 820hs.
rx470 +20 710hs

Soliqesh

newbie

Activity: 48

Merit: 0

Quote from: Asgaroth on December 19, 2017, 04:20:35 PM

Quote from: Soliqesh on December 19, 2017, 03:59:57 PM

Quote from: new24core on December 19, 2017, 03:47:32 PM

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Never heard of OverdriveNTool before and looks good. Can you please provide a screenshot of one of your profiles ?

OverdriveNTool - https://imgur.com/a/9xeQ4
Bat file for autosettings - https://imgur.com/a/UaTu7

Looking at the image for the OverdriveNTool, it looks like you're getting 850H/s per card with those settings, but it looks like you mentioned you were getting 1152H/s above, was that a typo?

No, I meant the value of -h. I didnt find a solution to this problem.

Asgaroth

newbie

Activity: 49

Merit: 0

Quote from: Soliqesh on December 19, 2017, 03:59:57 PM

Quote from: new24core on December 19, 2017, 03:47:32 PM

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Never heard of OverdriveNTool before and looks good. Can you please provide a screenshot of one of your profiles ?

OverdriveNTool - https://imgur.com/a/9xeQ4
Bat file for autosettings - https://imgur.com/a/UaTu7

Looking at the image for the OverdriveNTool, it looks like you're getting 850H/s per card with those settings, but it looks like you mentioned you were getting 1152H/s above, was that a typo?

new24core

member

Activity: 413

Merit: 17

Quote from: Soliqesh on December 19, 2017, 03:59:57 PM

Quote from: new24core on December 19, 2017, 03:47:32 PM

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Never heard of OverdriveNTool before and looks good. Can you please provide a screenshot of one of your profiles ?

OverdriveNTool - https://imgur.com/a/9xeQ4
Bat file for autosettings - https://imgur.com/a/UaTu7

Thanks a million ;-)

jamfro

newbie

Activity: 6

Merit: 0

2000 on vega hmm, just tried it on mine getting like 1100. Would anyone share there settings that get them over 2000? Thanks

Soliqesh

newbie

Activity: 48

Merit: 0

Quote from: new24core on December 19, 2017, 03:47:32 PM

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Never heard of OverdriveNTool before and looks good. Can you please provide a screenshot of one of your profiles ?

OverdriveNTool - https://imgur.com/a/9xeQ4
Bat file for autosettings - https://imgur.com/a/UaTu7

new24core

member

Activity: 413

Merit: 17

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Never heard of OverdriveNTool before and looks good. Can you please provide a screenshot of one of your profiles ?

Asgaroth

newbie

Activity: 49

Merit: 0

Quote from: Soliqesh on December 19, 2017, 03:38:00 PM

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Oh balls, I'm running on Linux so I cannot use OverdriveNTool Sad

I cannot get Claymore to set my gpu/memory clocks either, for some reason they do not apply

Soliqesh

newbie

Activity: 48

Merit: 0

Quote from: Asgaroth on December 19, 2017, 03:33:26 PM

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1)OverdriveNTool
2)One-click, Hynix(XFX GTR)/Elpida(XFX GTS) memory
3)XFX GTR XXX RX580 8GB(1rig) and XFX GTS RX 580 8GB(2rig)

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 58. (Read 2145056 times)