Claymore's CryptoNote AMD GPU Miner v11.3 - page 59.

Asgaroth

newbie

Activity: 49

Merit: 0

Quote from: Soliqesh on December 19, 2017, 03:23:17 PM

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

Soliqesh

newbie

Activity: 48

Merit: 0

Quote from: new24core on December 19, 2017, 03:16:32 PM

Quote from: Asgaroth on December 19, 2017, 03:10:47 PM

Quote from: Soliqesh on December 19, 2017, 02:58:28 PM

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

I have rx-580's and I get between 830-860H/s, it was an upgrade from 780-790H/s, but I cannot hit 900+ H/s with these RX-580 8GB cards (Hynix).

What CPU/RAM speed are you all running, as this is the hardware/limiting factor as we all know!

580's

CPU/RAM/Volatge/memoryvoltage/Hash
1200/2200/900/940/850
1200/2000/900/940/780

1300/2210/970/950/1152, i try your settings, result = 680-750 h

Asgaroth

newbie

Activity: 49

Merit: 0

1265/2250/65285/900/860

Code:

=== GPU 0, 01:00.0 /sys/class/drm/card0 ===
Adapter 0: Ellesmere [Radeon RX 470/480/570/580]
Core: 1265 MHz, Mem: 2250 MHz, CoreOD: 0, MemOD: 0, Load: 100%, Temp: 63 C, Fan: 40%
Core clocks: 300 751 1048 1181 1265 1335 1391 1200
Memory Clocks: 300 1000 2250
auto DPM 4 CORE 1265Mhz V 65285 MEMSTATE 2 MEM 2250Mhz PWR 75.233 W

=== GPU 1, 02:00.0 /sys/class/drm/card1 ===
Adapter 1: Ellesmere [Radeon RX 470/480/570/580]
Core: 1265 MHz, Mem: 2250 MHz, CoreOD: 0, MemOD: 0, Load: 100%, Temp: 54 C, Fan: 40%
Core clocks: 300 751 1048 1181 1265 1335 1391 1200
Memory Clocks: 300 1000 2250
auto DPM 4 CORE 1265Mhz V 65285 MEMSTATE 2 MEM 2250Mhz PWR 76.124 W

Code:

==================== ROCm System Management Interface ====================
================================================================================
GPU DID Temp AvgPwr SCLK MCLK Fan Perf OverDrive ECC
1 67df 54.0c 76.131W 1265Mhz 2250Mhz 40.0% auto 0% N/A
0 67df 62.0c 76.88W 1265Mhz 2250Mhz 40.0% auto 0% N/A
================================================================================
==================== End of ROCm SMI Log ====================

Code:

XMR - Total Speed: 1724 H/s, Total Shares: 6, Rejected: 0, Time: 00:08
XMR: GPU0 860 H/s, GPU1 864 H/s
GPU0 t=62C fan=40%, GPU1 t=54C fan=40%
GPU0 t=63C fan=40%, GPU1 t=55C fan=40%

new24core

member

Activity: 413

Merit: 17

Quote from: Asgaroth on December 19, 2017, 03:10:47 PM

Quote from: Soliqesh on December 19, 2017, 02:58:28 PM

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

I have rx-580's and I get between 830-860H/s, it was an upgrade from 780-790H/s, but I cannot hit 900+ H/s with these RX-580 8GB cards (Hynix).

What CPU/RAM speed are you all running, as this is the hardware/limiting factor as we all know!

580's

CPU/RAM/Volatge/memoryvoltage/Hash
1200/2200/900/940/850
1200/2000/900/940/780

Asgaroth

newbie

Activity: 49

Merit: 0

Quote from: Soliqesh on December 19, 2017, 02:58:28 PM

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

I have rx-580's and I get between 830-860H/s, it was an upgrade from 780-790H/s, but I cannot hit 900+ H/s with these RX-580 8GB cards (Hynix).

new24core

member

Activity: 413

Merit: 17

Quote from: Soliqesh on December 19, 2017, 02:58:28 PM

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

What is the auto selection for -h on those 570/580 4GB ?

BSAlex

member

Activity: 239

Merit: 10

Quote from: stanfosdguy on December 19, 2017, 02:39:34 PM

Quote from: notbatman on December 19, 2017, 02:38:05 PM

Quote from: stanfosdguy on December 19, 2017, 02:29:09 PM

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner. I am running Crimson 15.12 drivers for the older 3 cards. I was running 17.11.2 for the 570, but my speeds were really low (~350h/s). I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows. If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

Not that I disagree, but they all make $1/day each or more, so for now, ~~they are ok.~~ I am more interested in getting my 570 running.

Best option - run RX 570 in a sepatare system with recent drivers, leave alone you old cards with 15.12 driver as they are still profitable. More interesting way - try to make Docker container with direct access to GPU and run two containers - one with 15.12 and old cards, other - say with blockchain drivers and 570 card. Please note I have not done it myself so please share your case when you'll get it running. Problem is that Claymore miner never was designed for running withing Docker container and no one knows for sure how it will work in it.

dnyt

newbie

Activity: 29

Merit: 0

Thank you Claymore for releasing v11!

Looking good!

Soliqesh

newbie

Activity: 48

Merit: 0

My rig with RX570/RX580 4GB upgrade to 930-950h per card, but rig with RX580 8GB have 850H... i tried -h 1800, but no effect. Who have troubles with RX580 8GB?

stanfosdguy

newbie

Activity: 2

Merit: 0

Quote from: notbatman on December 19, 2017, 02:38:05 PM

Quote from: stanfosdguy on December 19, 2017, 02:29:09 PM

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner. I am running Crimson 15.12 drivers for the older 3 cards. I was running 17.11.2 for the 570, but my speeds were really low (~350h/s). I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows. If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

Not that I disagree, but they all make $1/day each or more, so for now, ~~they are ok.~~ I am more interested in getting my 570 running.

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: stanfosdguy on December 19, 2017, 02:29:09 PM

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner. I am running Crimson 15.12 drivers for the older 3 cards. I was running 17.11.2 for the 570, but my speeds were really low (~350h/s). I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows. If anyone could provide any guidance, I would certainly appreciate it.

All those cards have a date with the recycle bin except for that 570.

stanfosdguy

newbie

Activity: 2

Merit: 0

Not sure what I am doing wrong, but I am not having a lot of luck getting things running 'right'.

I am running the following:

windows 7 x64
8GB RAM
16GB VirtualMemory
Powercolor HD7950 3gb
Asus r9 270x 2gb
Sapphire dual-x 280x 3gb
MSI Armor 570 8gb

I am trying to run claymore v11 cryptonote miner. I am running Crimson 15.12 drivers for the older 3 cards. I was running 17.11.2 for the 570, but my speeds were really low (~350h/s). I am trying to find a better driver to use with the 570 to get my speeds up, but so far all of the other drivers I have tried kick my 570 into an event id 43 in windows. If anyone could provide any guidance, I would certainly appreciate it.

rascabily

sr. member

Activity: 379

Merit: 250

Quote from: ?? on ??

http://prntscr.com/hpmtqb Asus RX 480 memory samsung v 11 2056 H\s Wink

this is rx vega 64

rascabily

sr. member

Activity: 379

Merit: 250

Quote from: ?? on ??

http://prntscr.com/hpmtqb Asus RX 480 memory samsung v 11 2056 H\s Wink

this is rx vega 64

oddity2505

member

Activity: 120

Merit: 10

Quote from: notbatman on December 19, 2017, 11:47:32 AM

^^^ 2k WTF man

Seems like a joke. I guess has a vega and 480, making 2k and 1k correspondingly.

notbatman

legendary

Activity: 2212

Merit: 1038

^^^ 2k WTF man

Asgaroth

newbie

Activity: 49

Merit: 0

I have 2 x PowerColor Red Devil RX-580 Golden Sample 8GB cards mining Electroneum with the following speeds with v11.0

Code:

XMR - Total Speed: 1721 H/s, Total Shares: 442, Rejected: 0, Time: 17:40
XMR: GPU0 858 H/s, GPU1 863 H/s

If I'm not mistaken, I think I was getting around 780/790 H/s per card prior to the update.

BIOS moded with the following reported by rocm-smi:

Code:

==================== ROCm System Management Interface ====================
================================================================================
GPU DID Temp AvgPwr SCLK MCLK Fan Perf OverDrive ECC
1 67df 54.0c 76.111W 1265Mhz 2250Mhz 40.0% auto 0% N/A
0 67df 62.0c 77.182W 1265Mhz 2250Mhz 40.0% auto 0% N/A
================================================================================
==================== End of ROCm SMI Log ====================

Wish I could hit the 900+ H/s mark, but I'm not sure what else I could do to improve the speeds.

onionpealer

jr. member

Activity: 238

Merit: 1

Quote from: petrasblynai on December 19, 2017, 10:00:00 AM

sorry for stupid question Huh

maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

You need a pool to start with, there are many out there. You could start out with MiningPoolHub www.miningpoolhub.com , support thread https://bitcointalksearch.org/topic/annpool-mining-pool-hub-multipool-multialgo-auto-exchange-to-any-coin-472510

Now delete everything in the 'start.bat' file (ignore the config.txt file) and put this in the start.bat file, changing the Username/Workername for your specific needs.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20596 -xwal USERNAME.WORKERNAME -xpsw x -allpools 1

petrasblynai

newbie

Activity: 11

Merit: 0

sorry for stupid question Huh

maybe someone can explain me step by step how to start?
I have https://mymonero.com wallet so I need put in config file and start ? what I should do more ?
thanks, guy!

infojunkiePHD

newbie

Activity: 49

Merit: 0

Quote from: restless on December 19, 2017, 01:51:12 AM

Quote from: infojunkiePHD on December 18, 2017, 02:51:09 PM

My experience is the same as restless. On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0 - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

You get 800h/s from 270 oc-ed ?! What clocks ?! Frankly I don't believe it
I get 480-500 from 270x running 1100/1500...

I also get hangs sometimes with 270x and 11.0 - when the card is main one running the display under Win10. Same card under Win7 runs fine 0-o

Read it closer, restless. I have two cards, that's 425-430 each.

9.7 'just works' for those of us with pitcairn.

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 59. (Read 2145056 times)