Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 76. (Read 2145056 times)

how do you lower the intensity?

Guys, i  need your help.

I have 8x Sapphire RX480 8GB Micron GPU with custom BIOS. Dualmining with 198MH/s ETH, 3950H/s SIA. Settings: 1150;875 2000;910. Virtual Memory: 60GB.
Now I tried do start ETN with this settings. But only 3 Cards are working.

00:23:28:915   1d50   XMR - Total Speed: 2286 H/s, Total Shares: 32, Rejected: 0, Time: 00:00
00:23:28:917   1d50   XMR: GPU0 767 H/s, GPU1 773 H/s, GPU2 746 H/s, GPU3 0 H/s, GPU4 0 H/s, GPU5 0 H/s, GPU6 0 H/s

What I have to change, that this will work with 7 Cards?

I had this issue with asus version of the same GPU the way i fixed it was to lower the intensity and disable and re enable the gpu from device manager.

so did i, before i run claymore from nicehash. you can overclock but leave the voltage.... and everything fine (for me)

Does anyone know the fix for the WATCHDOG: GPU 0 hangs in OpenCL call, exit?

using this version with a sapphire r9 380x

Also, my screen will turn black for like 1-2 secs and go back to normal and that's when my h/s goes to zero and has to start up again.

leave your voltage automatically... it works for me without reset

Haven't been able to get Claymore stable 24hr+ with my RX580 8G rigs. Settings were 1200/2000/1100mV with power stage 5. Stilll reseting.

Since some of you are talking about SGminer...trying to config sgminer 5.5.5 in SMOS for my rigs default is:

--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u [yourwallet].$rigName -p x --rawintensity 1000 -w 8 --text-only

I would like to change the rawintensity, worksize etc to be optimized for my miners. I have two different setups, either RX 570 4G or RX580 8G.

For the RX570 4G I'm trying to pass a --rawintensity 512 --worksize 4. For the RX580 8G, I'm trying to pass --rawintensity 1152 --worksize 8.

I've also seen people change the gpu-threads to 2, though I haven't played with this setting. Has anyone seen a change in performance by changing # GPU threads?

When I do this, I see no change in performance, even when I adjust values. It just shows:

[21:54:08] Startup GPU initialization... Using settings from pool cryptonight.usa.nicehash.com.
[21:54:08] Startup Pool No = 0
[21:54:08] Building binary cryptonightEllesmeregw8l8.bin
Initialising kernel cryptonight.cl with nfactor 10, n 1024.

Right now I'm only hashing at 480H/s on the 570 and 677H/s on the RX580. With Claymore I was getting 630H/s and 740H/s respectively.

Thanks.

But this will cut down mining speed. How to fix devfee pool connection problem?

-nofee 1

How to fix devfee - connection lost, retry in 20 sec? Also having just connection lost, retry in 20 sec. ALL THE TIME! This is slowing down mining, right? How to fix this crap? Mining at nicehash using v9.7.

I tried this fix, but it doesnt work.
https://github.com/nicehash/NiceHashMinerLegacy/issues/424

800 is really good. custom straps? at what reject rate?  
I'm getting on 470 refs up to 715 with below 3% rejects and 0 hw errors.
These are hot and like to cook wires:) ... so my top volts are 923 - never above it. normally below 900. some could do just fine on 854 on eth (1080:2000)

I have lots molexes from psu chains from shitty Thermaltakes making crispy noises on move and loosing plastic dust  cheap fucking thieves

Uber-Mix Extreme v3.1 timings

Sapphire Nitro+ RX470 8G Samsung

For your RX 470 used 1750 timing to 2000 ? Or what is best option for this very nice results?

Which kind of card do you use ? RX470 ?

SAPPHIRE NITRO+ Radeon RX 580 8GB any point where can I get one for my card?

What kind of cards do you have?   There are tons of guides out there that detail it step by step and also provide pre-modified bios files.   IE for my cards...

   https://anorak.tech/t/xfx-amd-radeon-rx-580-gtr-8gb-hynix/6802/26

Do you mean GPU BIOS?

Gotta flush that BIOS if you want to touch 700-800

How do you guys getting 750 or even 800 h/s with RX580 for XMR?
Tried CryptoNote AMD GPU Miner v10.2 with 17.11.1 drivers can't get over 350
The best results I can squeeze from it is 606 h/s on Claymore CryptoNote GPU Miner v9.5 Beta

Thanks.