Claymore's CryptoNote AMD GPU Miner v11.3 - page 71.

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: jelin1984 on December 04, 2017, 07:09:58 PM

also why 9.7 does not recognized

electreum wallet? Huh

I'm not sure if it's supported but try "daemon+tcp://".

jelin1984

legendary

Activity: 2408

Merit: 1004

also why 9.7 does not recognized

electreum wallet? Huh

FFI2013

hero member

Activity: 906

Merit: 507

What are good settings for 470's 4gb I can't find a good setting I either get half my hashrate or crash but the crazy part is my 570's 4gb are fine

jelin1984

legendary

Activity: 2408

Merit: 1004

how what is the file

post it here to see what is work with mine@? Huh

??

GIVE ME DK2AN0 FAILED -4

AT ALL GPU

WHY?

Smp

newbie

Activity: 31

Merit: 0

My fury working very well this 10.2 version.

jelin1984

legendary

Activity: 2408

Merit: 1004

i have 6 r9 fury
\
but i can not run it with these miner

can anyone write here the start.bat file
\
because mine start.bat file can not run these R9 fury cards Roll Eyes

tg88

legendary

Activity: 2492

Merit: 1429

Payment Gateway Allows Recurring Payments

Quote from: notbatman on December 04, 2017, 06:47:44 AM

For anybody having issues with nicehash causing the miner to "segmentation fault (core dumped)" just add a failover pool and that will stop that from happening.

Thank you for sharing, I went through this problem yesterday, I'll do the test.

notbatman

legendary

Activity: 2212

Merit: 1038

For anybody having issues with nicehash causing the miner to "segmentation fault (core dumped)" just add a failover pool and that will stop that from happening.

yoonline

newbie

Activity: 51

Merit: 0

sir claymore, we want dual miner

Teredic

newbie

Activity: 8

Merit: 0

Hello,

I am using the version 9.7 with Nicehash, and i found strange that the latest version (10.2) wasn't working with my gpu...

On the v10.2 readme it is written that the 7xxx cards are compatible.

After some research, i found the reason.

When i launch the version 10.x, i get the message : "No ASM binary found for GPU 0"

My card is a AMD Radeon 7750 1 Gb.

So i find it strange. Could you fix it please ?

notbatman

legendary

Activity: 2212

Merit: 1038

I just woke up and it's cold, I'm fucking freezing... why am I freezing cold?

Claymore dude, pls fix the nicehash problem I woke up to find EVERY RIG HAD SUFFERED A SEGMENTATION FAULT!

Log:

Code:

01:52:55:712 e4ff9700 cert subject: /C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/[email protected]
01:52:55:713 e4ff9700 cert issuer: /C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/[email protected]
01:52:55:713 e4ff9700 SSL/TLS encryption is enabled
01:52:55:713 e4ff9700 send: {"method": "login", "params": {"login": "[REDACTED_FOR_BCT_FORUM_POST].[MINER]", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

01:52:55:713 e4ff9700 XMR: Stratum - Connected (cryptonight.eu.nicehash.com:33355) (SSL/TLS)
01:52:55:938 e4ff9700 got 79 bytes
01:52:55:939 e4ff9700 buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internal server error"}}

01:52:55:939 e4ff9700 parse packet: 76
01:52:55:939 e4ff9700 Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
01:52:55:939 e4ff9700 buf was cleared

Terminal output:

Code:

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
Segmentation fault (core dumped)

Running miner v10.2 on Ubuntu 16.04.

edit:

I found this message in one of the logs before things went south, looks like it restarted several times before it crashed:

Code:

01:52:24:113 acff1700 XMR: Stratum - Cannot connect to cryptonight.eu.nicehash.com:33355
01:52:24:113 acff1700 XMR: Stratum - Failed to connect, retry in 20 sec...
...[snip]...
01:52:32:885 59dd740 watchdog - eminer thread hangs
01:52:32:885 59dd740 em hbt: 137956, fm hbt: 63,
01:52:32:885 59dd740 Miner thread hangs, need to restart miner!
...[snip]...
01:52:32:885 59dd740 watchdog - eminer thread hangs
01:52:32:885 59dd740 em hbt: 137956, fm hbt: 63,
01:52:32:885 59dd740 Miner thread hangs, need to restart miner!

edit_2:

I've added a failover pool, maybe that will help...

edit_3:

All the miners restarted (in a fresh terminal window) no problem without a reboot so probably not hardware related.

edit_4:

Confirmed, adding a failover pool is a temporary workaround. Only one rig has the failover and it's still up, all the others are seg faulted.

boppzoli

newbie

Activity: 3

Merit: 0

OK, but teorethically the wallet from poloniex is the new spec ... aka integrated wallet. They do not supply an ID like on bitterx ...
I mined for 1 day and must wait to see if the transaction will happen at 0.315 XMR ... I must wait 6 days until I mine 0.315 XMR ... I hope it will not be a useless mining ... Cheesy

BSAlex

member

Activity: 239

Merit: 10

Quote from: invicta on December 01, 2017, 05:48:05 AM

for 9,7 version write " -a 3 " in command line for old card (5xxx & 6xxx) :

I might have misread his comment but I understood it to mean he is using 10.2 but it doesn't work so he's going to go back and use 9.7. AFAIK 10.2 won't work on a 6990 but it will on 9.7 with the algorithm switch you provided.

No need to specify "-a 3", miner defaults to "-a 3" for HD6990 , 9.7 version of miner
"No ASM" diagnostics is always in 10.2 version due (a pity) to no asm for Cayman|Antilles XT cards in new version.
Not all hope is gone. Sir Claymore stated that if he have plenty of time he can include binaries for older cards. Its simply not a priority just for now, so obsolete card users are stuck with 9.7

phuocduong

member

Activity: 182

Merit: 10

Quote from: boppzoli on December 01, 2017, 06:02:58 AM

Hi,
Can I use Claymore's 10.2 beta XMR miner with poloniex integrated wallet address?
My wallet at poloniex looks like: 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbS3oPFsdpb3PEVAEezY
Thank you in advance!

using wallet.payment ... in config

boppzoli

newbie

Activity: 3

Merit: 0

Hi,
Can I use Claymore's 10.2 beta XMR miner with poloniex integrated wallet address?
My wallet at poloniex looks like: 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbS3oPFsdpb3PEVAEezY
Thank you in advance!

invicta

member

Activity: 194

Merit: 10

Quote from: ser_ator on November 29, 2017, 04:15:07 PM

Quote from: invicta on November 29, 2017, 08:01:07 AM

Quote from: antituto2 on November 29, 2017, 07:54:17 AM

I try with 6990 4GB but ASM not working

any command? I use 9.7 now

"This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

Read the readme!

for 9,7 version write " -a 3 " in command line for old card (5xxx & 6xxx) :

"-a   Select algorithm:
   "-a 0" (default) means autoselection.
   "-a 1" fastest mining mode for 290/290x and 270/270x cards.
   "-a 2" low power consumption mode for 290/290x cards. A bit less speed (1%) but less power consumption (10-15%).
   "-a 3" fastest mining for old cards (6xxx and 5xxx).
   "-a 4" fastest mining for recent cards (280x, 270/270x etc).
   You can also specify mode for every card separately, for example, "-a 1234".
   It is very important for good mining speed to select correct "-a" and "-h" values for your cards.
   For old cards 5xxx and 6xxx use "-a 3" mode only, otherwise you can get "LowDifficultyShare" errors from pool."

I might have misread his comment but I understood it to mean he is using 10.2 but it doesn't work so he's going to go back and use 9.7. AFAIK 10.2 won't work on a 6990 but it will on 9.7 with the algorithm switch you provided.

Maxima3891

newbie

Activity: 3

Merit: 0

Quote from: BSAlex on November 30, 2017, 03:54:33 PM

Quote from: Maxima3891 on November 30, 2017, 03:29:27 PM

Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad

. Any other ideas what I could try?
Oh.. And I updated drivers to 17.11.4. That didn't help either.

I'll remove RX480 from your system, deinstall current driver with latest DDU and install august blockchain drivers.
[/quote]

I managed to fix it. I had to put line "-dmem 0" to config file because otherwise it used too much memory in 280 (over 3100MB and 280 have only 3072MB).

BSAlex

member

Activity: 239

Merit: 10

Quote from: Maxima3891 on November 30, 2017, 03:29:27 PM

Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad

. Any other ideas what I could try?
Oh.. And I updated drivers to 17.11.4. That didn't help either.
[/quote]

I'll remove RX480 from your system, deinstall current driver with latest DDU and install august blockchain drivers.

Maxima3891

newbie

Activity: 3

Merit: 0

Quote from: BSAlex on November 30, 2017, 02:58:18 PM

Quote from: Maxima3891 on November 30, 2017, 12:17:57 PM

Hi all!

I get four error messages when I try to mine with Claymore's CryptoNote AMD GPU Miner v10.2 Beta.

It says:

Code:

17:29:51:156 1840 GPU 1, GpuMiner dk2a failed -4
17:29:51:296 bd4 GPU 1, GpuMiner dk2an0 failed -4
17:29:51:328 4c4 GPU 1, GpuMiner dk2an0 failed -4
17:29:51:359 1dc8 GPU 1, GpuMiner dk2an0 failed -4

That GPU 1 is ASUS Radeon R9 280 DirectCU II 3GB and GPU 0 (Sapphire Radeon RX 480 Nitro+ 8GB) works but with low hashrate = 378 H/s.

Radeon Software Version is 16.9.1.

Any help to get them working?

Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

Thank you for your answer!

I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad

. Any other ideas what I could try?
Oh.. And I updated drivers to 17.11.4. That didn't help either.

BSAlex

member

Activity: 239

Merit: 10

Quote from: Maxima3891 on November 30, 2017, 12:17:57 PM

Hi all!

I get four error messages when I try to mine with Claymore's CryptoNote AMD GPU Miner v10.2 Beta.

It says:

Code:

17:29:51:156 1840 GPU 1, GpuMiner dk2a failed -4
17:29:51:296 bd4 GPU 1, GpuMiner dk2an0 failed -4
17:29:51:328 4c4 GPU 1, GpuMiner dk2an0 failed -4
17:29:51:359 1dc8 GPU 1, GpuMiner dk2an0 failed -4

That GPU 1 is ASUS Radeon R9 280 DirectCU II 3GB and GPU 0 (Sapphire Radeon RX 480 Nitro+ 8GB) works but with low hashrate = 378 H/s.

Radeon Software Version is 16.9.1.

Any help to get them working?

Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 71. (Read 2145043 times)