Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 73. (Read 2145043 times)
Holy crap Claymore dude, one of my 480s gets 996 h/s!!! It was doing 830 h/s on the other miner I've been using.
nanopool don't show my statistics.dont show my worker online,i use v10.2 beta,vega 56,blockchain driver.
Please add R7250 ;-;
It was their Nicehash EU (SSL) servers, switching to the USA servers resolved it.
EU server also works OK now
anyone use rx470 with this miner ?, I can only got 620H/s. any tips for me guys ?
BIOS mod it (if you haven’t already) - strap the 1500 timings to the rest and OC the memory to 1800+. It should reach 700-750H/s easy and some have reported over 800H/s on Polaris. I’ve gone for stability and dialled mine back a bit.
anyone use rx470 with this miner ?, I can only got 620H/s. any tips for me guys ?
I am using 9.7 due to old cards that are not supported by 10.2 (Cayman)
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
All users running Cryptonote on Nicehash are getting the error on 9.7 and 10.2. It's not to do with 9.7 it's something to do with Nicehash's servers (difficulty too low/high being set?), it's on Reddit at the moment. I was going to try and switch location as I'm EU, to USA or elsewhere if it continues indefinitely as I'm losing about 25% hashpower to rejected shares.
I feel it is something to do with difficulty change. Series of rejected shares begin when Nicehash changes difficulty.
It was their Nicehash EU (SSL) servers, switching to the USA servers resolved it.
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I will release an update for dual miner in 1-3 days, then I will have some time for this miner.
I believe that he's talking about his ETH dual miner.
It would be nice to see a CryptoNote dual miner, as he mentioned that it's theoretically possible, but he seems to be very busy right now. Maybe someday in the future.
I am using 9.7 due to old cards that are not supported by 10.2 (Cayman)
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
All users running Cryptonote on Nicehash are getting the error on 9.7 and 10.2. It's not to do with 9.7 it's something to do with Nicehash's servers (difficulty too low/high being set?), it's on Reddit at the moment. I was going to try and switch location as I'm EU, to USA or elsewhere if it continues indefinitely as I'm losing about 25% hashpower to rejected shares.
I feel it is something to do with difficulty change. Series of rejected shares begin when Nicehash changes difficulty.
Hi everybody !
I have seen that somes of you reach 1400H/s with a vega56
I get 1000H/s max (default firmware, no OC...)
I use AMD n°23.20.782.259 drivers.
Could you explain me how to have the same results ?
Which Drivers do you use ? Which Firmware ?
Which software to configure it ?
Which parameters in Claymore ?
Thanks by advance !
I have seen that somes of you reach 1400H/s with a vega56
I get 1000H/s max (default firmware, no OC...)
I use AMD n°23.20.782.259 drivers.
Could you explain me how to have the same results ?
Which Drivers do you use ? Which Firmware ?
Which software to configure it ?
Which parameters in Claymore ?
Thanks by advance !
Step 1 : Dont use Claymore's miner for Vega (use xmr stak miner or cast miner)
Step 2 : Google HDCC Activator, set it up to enable disable the Vega cards on each boot
Step 3 : Enjoy 1900h/s
Thanks for your help !
I have tried to install blockchain drivers after uninstalling the others but I got some issues :
the PC freezes or the last card is not recognized or drivers do not install at all...
Config :
Win10 64bit
Asrock H81
8Go
120Go SSD (40Go for virtual memory )
5 Vega56
did you uninstall the old drivers in safe mode?
also if you run into lot of troubles better start over with win 10 clean install, than follow this guide step-by-step https://vegamining.blogspot.com
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I will release an update for dual miner in 1-3 days, then I will have some time for this miner.
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I will release an update for dual miner in 1-3 days, then I will have some time for this miner.
I am using 9.7 due to old cards that are not supported by 10.2 (Cayman)
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
All users running Cryptonote on Nicehash are getting the error on 9.7 and 10.2. It's not to do with 9.7 it's something to do with Nicehash's servers (difficulty too low/high being set?), it's on Reddit at the moment. I was going to try and switch location as I'm EU, to USA or elsewhere if it continues indefinitely as I'm losing about 25% hashpower to rejected shares.
I am using 9.7 due to old cards that are not supported by 10.2 (Cayman)
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
Suddenly started to receive many rejected shares with error
{"id":4,"jsonrpc":"2.0","error":{"code":1,"message":"Shareabovetarget."}}
using nicehash-eu pool
Please help to find what's the problem.
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I think the answer is gonna be ‘get with the times’. Pitcairn/Curacao is GCN 2 and we’re on Vega which is GCN 5 so 3 generations behind. Personally I’m going to rebuild my rigs, put all the Pitcairn cards into one rig and run 9.7 on it. I’ve had enough of this 10-30% incorrect shares and it’s obviously (and quite reasonably) not a high priority for him.
I'll let him speak for himself. He included updates to Pitcairn in his latest release, there was just a bug, and he works on his own time as he gets a chance. Perhaps he likes the challenge, perhaps he doesn't.
The pitcairn series are still solidly profitable with the right bios mods, there's still quite a few people using them. Far more than the number of people using vegas.
It’s up to you. I’m just posting based on what I’ve seen and think as I also use Pitcairn. There has been 3 releases since 9.7 and other than him acknowledging an issue, nothing has been done to resolve it so you can presume it isn’t a high priority. Especially when we know 9.7 is stable just a little slower and more power hungry.
I didn’t say Vega was more popular but consider Polaris then.
Hi everybody !
I have seen that somes of you reach 1400H/s with a vega56
I get 1000H/s max (default firmware, no OC...)
I use AMD n°23.20.782.259 drivers.
Could you explain me how to have the same results ?
Which Drivers do you use ? Which Firmware ?
Which software to configure it ?
Which parameters in Claymore ?
Thanks by advance !
I have seen that somes of you reach 1400H/s with a vega56
I get 1000H/s max (default firmware, no OC...)
I use AMD n°23.20.782.259 drivers.
Could you explain me how to have the same results ?
Which Drivers do you use ? Which Firmware ?
Which software to configure it ?
Which parameters in Claymore ?
Thanks by advance !
Step 1 : Dont use Claymore's miner for Vega (use xmr stak miner or cast miner)
Step 2 : Google HDCC Activator, set it up to enable disable the Vega cards on each boot
Step 3 : Enjoy 1900h/s
Thanks for your help !
I have tried to install blockchain drivers after uninstalling the others but I got some issues :
the PC freezes or the last card is not recognized or drivers do not install at all...
Config :
Win10 64bit
Asrock H81
8Go
120Go SSD (40Go for virtual memory )
5 Vega56
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I think the answer is gonna be ‘get with the times’. Pitcairn/Curacao is GCN 2 and we’re on Vega which is GCN 5 so 3 generations behind. Personally I’m going to rebuild my rigs, put all the Pitcairn cards into one rig and run 9.7 on it. I’ve had enough of this 10-30% incorrect shares and it’s obviously (and quite reasonably) not a high priority for him.
I'll let him speak for himself. He included updates to Pitcairn in his latest release, there was just a bug, and he works on his own time as he gets a chance. Perhaps he likes the challenge, perhaps he doesn't.
The pitcairn series are still solidly profitable with the right bios mods, there's still quite a few people using them. Far more than the number of people using vegas.
To anyone having Issues with their Electroneum wallet showing 0 balance, create a shortcut for the cli.exe and open it's properties and add --restore-deterministic-wallet to the end of the target address so it looks like this
"electroneum-wallet-cli.exe --restore-deterministic-wallet"
That should fix it.
You could also try the rescan_bc command.
"electroneum-wallet-cli.exe --restore-deterministic-wallet"
That should fix it.
You could also try the rescan_bc command.
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
I think the answer is gonna be ‘get with the times’. Pitcairn/Curacao is GCN 2 and we’re on Vega which is GCN 5 so 3 generations behind. Personally I’m going to rebuild my rigs, put all the Pitcairn cards into one rig and run 9.7 on it. I’ve had enough of this 10-30% incorrect shares and it’s obviously (and quite reasonably) not a high priority for him.
Hey Claymore!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Any word on an update to this? Us pitcairn folks really want to use 10.2 but are stuck using 9.7
Thanks for all you do!
Jump to: