Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 75. (Read 2145056 times)

9.7 is for you

Hello,

i´m trying to mine using old HD-7770 (1GB), but i get this error:

����������������������������������������������������������������ͻ
�         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         �
����������������������������������������������������������������ͼ

XMR: 1 pool is specified
Main Monero pool is xmr.pool.minergate.com:45560
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 1
GPU #0: Capeverde, 641 MB available, 5 compute units
POOL version
No ASM binary found for GPU 0
Segmentation fault (core dumped)
moreplavec@frankenstein:~/Desktop/Claymore's CryptoNote AMD GPU Miner v10.2 - LINUX$

Can anybody help what´s wrong? Running Ubuntu 16 lts. Thanks for help or tips.

How are you checking your wallet to see if you've been paid? I think you need to pay and scan the blockchain (or maybe I'm thinking of something else). If you know there is 23 ETN in there why don't you try sending the command to transfer it onto Cryptopia and see what happens - unless I've totally misread the situation.

Thanks for the reply... I already fixed the issue in my original post. But as of yesterday I still wasn't getting paid. The screenshots below show the pool pages saying I have payout, but no etn in my wallet

https://www.dropbox.com/s/nuwizxkd9g3nzlt/Capture2.PNG
https://www.dropbox.com/s/2glasignqw4u30r/Capture3.PNG
https://www.dropbox.com/s/hi85qiu086p1e4p/Capture.PNG

I have created a new wallet and am awaiting my first payment to it, it's the only thing I can think to change, I've tried different pools and different miners

The stability of version 10.2 is very good. This is probably the best thing about stability. It provided some speed increase.

Ooops ! My bad. I just copied the setx part from my ethash version of Claymore and pasted it in, but it still worked. I really don't really know what the setx bits do, so if it works and hashes OK then I just let it be.

EDIT: Just had a look here https://cryptoyeti.com/how-to-make-and-work-with-a-windows-batch-file/2/ and it looks like either 0 or 1 will do.
"
GPU_FORCE_64BIT_PTR [0 | 1] – When set to 0 allows access to 32-bit address space of memory ~3.8 GB. When set to 1 allows access to 64-bit address space. While it may sound like a good idea to set it at 1, it may actually hurt performance since then pointer access would require twice the number clock cycles to complete than it would if left in 32bit mode
"

why are you using PTR 0 setting?
first post says to use PTR 1.
I thought PTR 0 is only for ethereum, NOT cryptonote.

This is a pool version and you need to set pools in your config.

here are some pools you can apply

http://dwarfpool.com/xmr

https://xmr.suprnova.cc/

Steps is already there how to put those pools in your config.

Check if you have anything in the .bat file (other than NsGpuCNMiner.exe) as it will ignore any setting in the config.txt file, from the readme.. If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.

Another way to use the setting is to have them all in the .bat file and not use the config.txt file, such as..

I added "-allpools 1" to the mix and did a test using the following configuration and it looks like it worked. I let it run for as long as it took to verify that it connected to the pool and started to submit shares so it may need some more tweaking to get it to work efficiently.

It's saying wrong wallet address, may that old version is not not supporting etn addresses.

Any ideas why I'm getting the below error when trying to run the miner, I have my config file set up correctly from what I can see

10:03:19:253   2ecc   
10:03:19:253   2ecc   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
10:03:19:254   2ecc   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
10:03:19:255   2ecc   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
10:03:19:459   2ecc   Wrong wallet address etnkPEUxuHpDjoECEoVnVpNNpfUzEzLxHdaXuQ5JzAcadCYzWTASodaTPgz9ndv1EYZo3J26x39xP4P EZXWGznGK1NsEeFVpGq - XMR/QCN/BCN/FCN/Duck/Dash/OEC/MCN/ORION addresses are supported only. Use "-allcoins 1" option.
10:03:19:460   2ecc   Pool uspool.electroneum.com removed from the list
10:03:19:462   2ecc   No pools specified! Specify at least one pool in "epools.txt" file or in "-o" parameter.

I've already tried this, tried numerous miners, tried various multiple thread tricks, they don't improve performance on the Radeon Pro Duo, so far claymore 10.2 at this 2040 setting it falls back to when I set higher numbers is the best H/s overall no matter what I do in the other miners, which is why I am trying to figure out if this is some hard coded limit because he didn't expect anyone to have larger than 8GB cards, it would be nice to see what 2304 with double memory enabled will do for this card and miner. no other intensity settings performed better, maxed was best, which indicates to me I have a lot of head room to go with this card, but I'm simply not able to capitalize on it yet, normally folks clog their cards and have to lower intensity, I seem to be in the opposite scenario where I am hitting some software limited wall, at least thats my assumption, I just don't know, which is why I am asking if folks know if there is a limit like this, its not like we can view source to find out so all I can do is ask and hope heh.

P.S. and yes I have tried 3 thread even 4 threads with those other miners, they always seem to choke on it, when I tried copying files to run two completely separate instances the program would kill itself, so I've tried everything I can possibly think of and have run out of ideas. I realize this is a workstation card so the odds of me finding someone with direct experience is almost zero, but hey its the internet, maybe I'll get lucky right.

try amd xmr stack
than you double or triple  the gpu thread and try different king of intensities

start with this (470 4G)
    { "index" : 1, "intensity" :940, "worksize" : 8, "affine_to_cpu" : false },
    { "index" : 1, "intensity" :940, "worksize" : 8, "affine_to_cpu" : false },

then try 940+  until you find the best setting , and check gpu memory usage

the vega 56 use  for 8G of memeory
   { "index" : 0, "intensity" : 2000, "worksize" : 8, "affine_to_cpu" : false },
    { "index" : 0, "intensity" : 1600, "worksize" : 8, "affine_to_cpu" : false },

after try with 3 x  or 4x (but not sure gpu if fast enough to do it)

Has any one had a situation where the O/S and miner both freeze after an hour of operating?

Set up:
Windows 10 1079 Build 16299.64
AsRock H110 Mobo
5x Vega 64 no mod
2x Rx 580 founders edition
16gb DDR4 ram
100gb virtual memory
M.2 SSD 250gb
I3-7350k
Amd 17.11.2

everything runs good but things just seem to freeze after a while...

Please help...

Sooo I have a bit of an unusual situation, almost nobody uses workstation GPU's to mine with, my project is over and now I have a "Radeon Pro Duo (polaris)" sitting idle doing nothing at all, it gets recognized as an RX 480/580 Ellesmere GPU which is basically what it is, but my problem is the largest intensity I can set is 2040 because any number larger just gets changed to 2040 and I am wondering if this is a software limitation? The GPU has 32GB total split into two 16GB chunks, one for each chip on the card, but it seems I can't use a full 2304 so every shader has its 2MB plus double memory enabled.

I don't suppose anyone has insight to this, I realize this is the 0.01% question but I just don't see anything stopping me from using 2304 intensity with double memory since that's only 9216MB which is well below the 16GB per chip on the card, it just changes it to 2040 when I use higher numbers.

Claymore 10.2
Windows 10 Pro
Blockchain Drivers
24GB System RAM (pagefile sizes up to 128GB tried makes no difference with or without one)

With intensity 2040 and a -20 power limit I get 1300 H/s and I can't help but wonder, what could I get if I was able to use 2304 instead, but it just won't let me set anything higher, it always changes itself back to 2040 on me, is this an internal limit since nobody expected a workstation card to be used?

It may cut down the mining speed a little but this is could be offset by the time lost during the switch from your pool to the dev pool and back again to your pool.
Someone, way back, did a calculation (it was on the Claymore Ethash miner) and worked out that you did not lose any overall hashrate by using '-nofee 1' as it took so long to load/reload the DAG that it was just as well not to pay the fee, it could be the same for the Cryptonote miner but I don't know.

0 hw errors for me also. Watts are quite high though (measured from the wall ofc), compared to 10.2 it's 23% more. And both (sgminer and 10.2) are running with exactly the same frequencies. Haven't noticed any rejects, but as cryptonight is not so heavily dependant on mem freq., I'm not overclocking the memory too much (1850). Reverted back to 10.2 as better hashrate at less wattage. Even with the devfee is still better for me.

I disabled a single GPU in my config (I have 5 GPUs that will be on Claymore).  My configs only seem to apply to my first GPU (#0); all others GPUs run at stock.  I've tried comma-separated values for each GPU and this does not work either.  Is there another way of applying configs to all GPUs (obviously not the disabled one)?

Applicable configs...