Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1124.

joaocha

full member

Activity: 254

Merit: 100

Quote from: Marvell1 on September 13, 2016, 01:27:14 AM

does this miner work with the geth proxy UI deal? I can never get that ethman thing to work

I have like 10 rigs really the only thing I like the pools for is they let me know when a miner is down via email, hard to do that with

this miner

why? just reserve your rig mac adress on router, them set -mport diferente por every one, them foward them on your router them save all settings on ethman

And you can configure email notifications on this miner too

doktor83

hero member

Activity: 2548

Merit: 626

This email option is pool dependant, not mining software.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

does this miner work with the geth proxy UI deal? I can never get that ethman thing to work

I have like 10 rigs really the only thing I like the pools for is they let me know when a miner is down via email, hard to do that with

this miner

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: husn on September 12, 2016, 06:42:57 PM

what about this ?
1 sophier RX 480 :
AVG 91.3 watt
fan speed 74%
GPU temp 80 Celsius
over 29 MH/s

sophier

PallWolf

newbie

Activity: 7

Merit: 0

Quote from: Claymore on September 09, 2016, 09:19:39 AM

Quote from: PallWolf on September 09, 2016, 06:34:38 AM

Hi, this my speed (2x480 XFX)
Version 6.3:
https://file-up.net/big_b43c7f73bd6932d57320160909122804.jpg
Version 6.4,7.0:
https://file-up.net/big_6cbf85c158863d1f7320160909123232.jpg
Speed down on 0.8 MH/s ETH and 10 MH/s on DCR per each VC, with the same others parameters.
Is it normally?

Try different drivers, may be it's the reason, also you can try to set "-etha 2" option.

Thank you "-etha 2" helps me

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Altcoining on September 12, 2016, 10:37:47 PM

Atikmpag.sys BSOD's are quite common with the RX 480's on Catalyst 16.8.3 on Win 7.

use 16.9.1

this version made life so much easier for all my problematic rigs

Altcoining

full member

Activity: 138

Merit: 100

Atikmpag.sys BSOD's are quite common with the RX 480's on Catalyst 16.8.3 on Win 7.

xxcsu

hero member

Activity: 1498

Merit: 597

What about that ? Grin

husn

newbie

Activity: 23

Merit: 0

what about this ?
1 sophier RX 480 :
AVG 91.3 watt
fan speed 74%
GPU temp 80 Celsius
over 29 MH/s

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: chschlumpf on September 12, 2016, 06:28:11 AM

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

Undervolt to ~960-1020mv, depends on ASIC quality, and clocks. Even with OC of 1340MHz you can drop to at least 1050mv. You can easily save 20-30w per card by doing this. Dual mining you probably won't get under 900w, maybe eth only, but then you lose profit.

peoples

member

Activity: 82

Merit: 11

Quote from: Claymore on September 11, 2016, 03:59:34 PM

Quote from: peoples on September 11, 2016, 01:34:42 PM

@Claymore
Do you have this one on your roadmap ? Maybe you have an information for target version ?
Thanks

I think I will add it in 1-2 weeks.

perfect. Thanks

elmanager

sr. member

Activity: 306

Merit: 250

Cryptobulgarian ninja

Quote from: d57heinz on September 12, 2016, 10:16:42 AM

Quote from: chschlumpf on September 12, 2016, 06:28:11 AM

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

try lowering your pow limit to -25% drops mine from 110 gpuz to 82. might get you where you want to be.

those of you discussing the 1x - 3x splitters they dont work. I couldnt get any card to post in them. or recognize in win 10.. even my 7 slot msi will only do 6 gpu for some reason. when i put it in the 2nd pcie 1x next to the middle 16x slot it wont post. may have to look into it again. (slot pci_e4)

Eliovp. Thanks for the advice ill check into wolf0 miner.

BR

Yeap, mostly the problems comes from the in front of the keyboard. Keep research, the right settings are out there! Cool

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: chschlumpf on September 12, 2016, 06:28:11 AM

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

try lowering your pow limit to -25% drops mine from 110 gpuz to 82. might get you where you want to be.

those of you discussing the 1x - 3x splitters they dont work. I couldnt get any card to post in them. or recognize in win 10.. even my 7 slot msi will only do 6 gpu for some reason. when i put it in the 2nd pcie 1x next to the middle 16x slot it wont post. may have to look into it again. (slot pci_e4)

Eliovp. Thanks for the advice ill check into wolf0 miner.

BR

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: Claymore on September 10, 2016, 06:08:27 AM

Quote from: d57heinz on September 09, 2016, 03:21:10 PM

Could you please release a miner that will only mine solo with the eth proxy for a reasonable upfront cost.
d57heinz

To all:
Please don't ask me to create some private miner, sell some customized version of the miner, etc - I don't do such things.
Also please don't try to hire me to help with some mining farm, to create some miner for some coin, etc - I just don't have time for it.

Thanks for getting back to me.. I appreciate it.

Mine on Cool

Visin

sr. member

Activity: 436

Merit: 250

CryptoTalk.Org - Get Paid for every Post!

Love to watch this thread.
Makes me want to get into mining again with all the innovative technology that has arisen since I was into it in early 2014 this thread is a very valuable stream of information. Grin

Velgelm

sr. member

Activity: 299

Merit: 250

read file readmi.txt this file contain examples and config parameters with explanation

uncaer9

sr. member

Activity: 413

Merit: 250

anyone sugest me, the best setting for dual mining ?
my friend sugest me to add this setting but i don't know for what, -ethi 1200 ? -ethi 1800 ?

Joemid

newbie

Activity: 44

Merit: 0

Quote from: chschlumpf on September 12, 2016, 06:28:11 AM

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

How much consumed each rx480?

It give 27 mhs stock or oc?

chschlumpf

newbie

Activity: 24

Merit: 0

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: wll1rah on September 12, 2016, 05:13:42 AM

@claymore

is it possible to disable temp and fan monitoring for the NV cards?

"-tt 0" disables it.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1124. (Read 6590565 times)