Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 121.

questen

newbie

Activity: 45

Merit: 0

Quote from: big_daddy on May 29, 2019, 01:16:17 PM

Quote from: questen on May 29, 2019, 10:28:52 AM

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

I’m seen here that the straps « 2 » are for the G1 Hynix, what gpu is connected to strap 1 and what to strap 3?

Strap:
1 Samsung
2 Hynix
3 Elpida
4 for old cards
The last test has been stable for 12 hours.

rdbase

legendary

Activity: 2828

Merit: 1497

Join the world-leading crypto sportsbook NOW!

Quote from: ldemorgan4 on May 29, 2019, 04:31:23 PM

Good evening Claymore Dev team,

Re Claymore version 14.6, why is it that the rxboost and strap will only work with SMOS (simple mining OS), and not for PiMP OS, or other Linux OS’s? Is their a tie up between Claymore and SMOS?
Kind regards,
Louis

No there isnt.
It also works in hiveOS as they added it to their latest upgrade on the 26th.
It is a linux ~ ubuntu distro operating system.

Raja_MBZ

legendary

Activity: 1862

Merit: 1505

Quote from: samurai1907 on May 29, 2019, 06:34:39 PM

can i get some help here?

i have some rx 570 4gb cards, when i try them alone i get hashrates but when i add them in 6 or 7 cards rigs, they locked whole system, whatever i do they dont work, what it could be a problem?

Welcome to the forum, mate! You can always get some nice help here. However, most of such issues (like yours) have been discussed here in the past in detail, so I think it'd be better if you first search for them in this (altcoins mining) section.

These two threads might be able to help you too:

https://bitcointalksearch.org/topic/help-to-connect-6-graphic-cards-1009890
https://bitcointalksearch.org/topic/cant-get-6-gpus-working-only-5-advise-please-1952805

Moreover, if these two threads fail to help you and you don't find any suitable thread, I'd recommend you to post more details of your issue. Are you facing that problem with even 2, 3, or 4 graphics cards (when you put them at once)?

samurai1907

newbie

Activity: 6

Merit: 0

can i get some help here?

i have some rx 570 4gb cards, when i try them alone i get hashrates but when i add them in 6 or 7 cards rigs, they locked whole system, whatever i do they dont work, what it could be a problem?

molivil

member

Activity: 72

Merit: 11

Quote from: NubyS on May 29, 2019, 04:54:19 AM

Is it possible to set up the miner (.bat) file to mine on more then one address from a single .bat file?
Let's say i have 1 rig with 7 GPU-s and i want 4 of them to mine on one address and 3 on another?

You can add a "start " at the beginning of the line which runs EthDcrMiner. That will open it up in a new instance of the miner and still continue running the batch. Then you can add another "start EthDcrMiner ..." line to run another instance with another wallet. You can not use rxboost or straps on more than one mining instance though.

ldemorgan4

newbie

Activity: 9

Merit: 0

Good evening Claymore Dev team,

Re Claymore version 14.6, why is it that the rxboost and strap will only work with SMOS (simple mining OS), and not for PiMP OS, or other Linux OS’s? Is their a tie up between Claymore and SMOS?
Kind regards,
Louis

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: questen on May 29, 2019, 10:28:52 AM

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

I’m seen here that the straps « 2 » are for the G1 Hynix, what gpu is connected to strap 1 and what to strap 3?

newtan

newbie

Activity: 6

Merit: 0

I missed that you use 14.6 I can't get that to work on a mixed rig ( Asrock H110 ) either. Still need to figure out why it crashes when it try to load RXboost. Without RXboost, it runs perfect, 8 AMD + 5 GTX 1070.
[/quote]
You are right, my rig is Asrock H110. Try remove RXboost no works either.
Maybe later version work?

SLcharger

newbie

Activity: 16

Merit: 0

Quote from: newtan on May 29, 2019, 12:53:46 PM

Quote from: ?? on ??

Quote from: newtan on May 28, 2019, 08:44:03 PM

Just comeback :)to Claymore 14.6 . The screen flashes and closes imediately. Log file show:

Quote

07:34:56:240   1590   Check and remove old log files...
07:34:56:241   1590   args: -epool eu1-etc.ethermine.org:5555 -ewal 0x32865c2bf42041c9093974df4412264cce6ed711 -epsw x -platform 1 -rxboost 1
07:34:56:241   1590
07:34:56:241   1590   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:34:56:241   1590   º Claymore's Dual GPU Miner - v14.6 º
07:34:56:241   1590   º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
07:34:56:242   1590   º Supercharged Edition º
07:34:56:242   1590   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
07:34:56:242   1590
07:34:56:243   1590   b735
07:34:56:444   1590   ETH: 1 pool is specified
07:34:56:444   1590   Main Ethereum pool is eu1-etc.ethermine.org:5555
07:34:56:444   1590   DCR: 0 pool is specified

My rig is RX570 4g.
Anyone know this isuse please help.
Thanks!

DDU and install again...

Thanks for your reply. Done it but it still closes right after starts. Sad

I missed that you use 14.6 I can't get that to work on a mixed rig ( Asrock H110 ) either. Still need to figure out why it crashes when it try to load RXboost. Without RXboost, it runs perfect, 8 AMD + 5 GTX 1070.

newtan

newbie

Activity: 6

Merit: 0

Quote from: ?? on ??

Quote from: newtan on May 28, 2019, 08:44:03 PM

Just comeback :)to Claymore 14.6 . The screen flashes and closes imediately. Log file show:

Quote

07:34:56:240   1590   Check and remove old log files...
07:34:56:241   1590   args: -epool eu1-etc.ethermine.org:5555 -ewal 0x32865c2bf42041c9093974df4412264cce6ed711 -epsw x -platform 1 -rxboost 1
07:34:56:241   1590
07:34:56:241   1590   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:34:56:241   1590   º Claymore's Dual GPU Miner - v14.6 º
07:34:56:241   1590   º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
07:34:56:242   1590   º Supercharged Edition º
07:34:56:242   1590   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
07:34:56:242   1590
07:34:56:243   1590   b735
07:34:56:444   1590   ETH: 1 pool is specified
07:34:56:444   1590   Main Ethereum pool is eu1-etc.ethermine.org:5555
07:34:56:444   1590   DCR: 0 pool is specified

My rig is RX570 4g.
Anyone know this isuse please help.
Thanks!

DDU and install again...

Thanks for your reply. Done it but it still closes right after starts. Sad

SLcharger

newbie

Activity: 16

Merit: 0

Use GPU Tweak II, instead of command line in Claymore.

https://www.asus.com/us/site/graphics-cards/gpu-tweak-ii/

In my experience it work better than Claymore.
Set power to 65%.

Considder :
Create a *.bat file and load delay 90 sec GPU Tweak II.
Create a shortcut.

Ad to startup file, together with shortcut to start.bat for Claymore.

This creates auto start, makes life more easy.

iRrromka

newbie

Activity: 37

Merit: 0

Quote from: br2459 on May 29, 2019, 12:23:39 PM

Quote from: iRrromka on May 29, 2019, 12:05:54 PM

HELP!

My wires are overheated!

If you use Afterburner, set power target to 70%

No, I don't. I use Clay command line options. Does anybody have such a problem?

br2459

full member

Activity: 269

Merit: 102

Quote from: iRrromka on May 29, 2019, 12:05:54 PM

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

If you use Afterburner, set power target to 70% to help with load. All of my NVIDIA rigs are set to 70% and run fine.

If the wires are hot it may mean you have a bad riser/power connector. Consider replacing them if the power target doesn't solve your problem.

iRrromka

newbie

Activity: 37

Merit: 0

HELP!

My wires are overheated!

Using 430.86 Nvidia drivers with 14.6 Clay and -powlim -30 option I've got "gpu 0 nvidia powlim set failed" message in the log file. Energy consumption is above 150 watts (asus 1078).

With previous drivers version it was about 109-115 watts. WTF?

Bojcha

hero member

Activity: 848

Merit: 500

Quote from: questen on May 29, 2019, 10:28:52 AM

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

You also need to set separate mem clocks. Depend on strap.. Hynix4gb around 2020, Samsung8gb 2000-2200, and elpida 1980-2100.

TomaszD

newbie

Activity: 1

Merit: 0

1)

Quote

Nvidia cards have "-strap 1" ... "-strap 6" values (1...3 are normal straps and 4...6 are low-intensity straps).

OK, but...

Quote

Use this option to adjust strap intensity for Nvidia cards if even straps with lowest intensity ("-strap 1" and "-strap 4") are unstable on your cards

So 1,2,3 are normal straps, 4,5,6 are low intensity straps, but lowest intensity straps are 1 and 4? Either something here doesn't make sense or I'm missing something.

2)

I'm unable to set different "sintensity" values for 8 cards (e.g. -sintensity 20,20,20,20,1,20,20,20), says it's an unrecognized command.

3)

If there is an internal straps database for direct selection, do we have to guess the values in the database? What value do I input for Micron memory on a 1060? If it's divided by memory capacity of 4 and 8GB, what about a 1060 6GB?

questen

newbie

Activity: 45

Merit: 0

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 9 -strap 1,2,2,3 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -fanmin 50 -fanmax 57 -tt 60 -ttli 70 -cvddc 900 -mvddc 900 -cclock 1150 -mclock 2000,2000,2000,2000 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 30 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

ALL 121Mh computemode on, Without MSI Afterburner

Bios is not flashed, as from the factory.
Driver - win10-64bit-radeon-software-adrenalin-2019-edition-19.5.2-may22

questen

newbie

Activity: 45

Merit: 0

Quote from: big_daddy on May 29, 2019, 08:10:48 AM

Quote from: questen on May 29, 2019, 07:45:26 AM

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000 MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

I'll post a new test soon

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: questen on May 29, 2019, 07:45:26 AM

EthDcrMiner64.exe -epool stratum+tcp://eu1-etc.ethermine.org:4444 -ewal X -eworker X -epsw x -esm 0 -dcri 8 -strap POL8S1,POL4H1,POL4H1,POL4E1 -rxboost 1 -allcoins etc -allpools 1 -estale 0 -ethi 6 -mode 1 -tt 1 -ttli 75 -etha 0 -r 0 -retrydelay 10 -dbg -1
pause

2 x Radeon™ RX 470 G1 Gaming 4G - 30 mh Hynix
1 x Radeon RX 470 ARMOR 8G OC - 29,8 mh Samsung
1 x Sapphire NITRO+ RX 480 OC 4 GB - 30 mh Elpida

Bios is not flashed, as from the factory.
Driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

Core 1130 Mem 2000 MSI Afterburner 4.6.2 Beta 1

have you tried the last driver version? it was less Mh/s or not tested at all?

RuMiner

member

Activity: 168

Merit: 15

@Claymore,

Quote

-logfile logs\
-logsmaxsize 100

combination is not working still in 14.6. Miner doesn't clean logs folder different from root

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 121. (Read 6590565 times)