Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 123.

lebuawu2

jr. member

Activity: 176

Merit: 2

Quote from: darkCryptoMiner on May 28, 2019, 02:52:43 PM

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.

davescream

newbie

Activity: 50

Merit: 0

Miner hangs on strap apply stage if monitor connected to that GPU. If monitor connected to another GPU - everythink fine.

Win10 x64, Sapphire RX470 Hynix 4gb

strap 1 rxboost 1
hanging even with memory clock 1700mhz

iRrromka

newbie

Activity: 37

Merit: 0

Quote from: darkCryptoMiner on May 28, 2019, 03:02:16 PM

Quote from: P00P135 on May 28, 2019, 02:59:36 PM

Quote from: darkCryptoMiner on May 28, 2019, 02:52:43 PM

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

I can try that - it dies before any mining though - The rxboost without strap is stable

I have the same issue on similar hardware config on Clay 14.6 (asrock h110 with 13 AMD RX 588 Nitro+). The rig freezes on setting strap for second GPU in the list (index 01). Other rigs are fine.

..XyZ..

newbie

Activity: 58

Merit: 0

@Claymore, please, can You add ewal value in "miner_getstat1" or "miner_getstat2" API response?

darkCryptoMiner

newbie

Activity: 30

Merit: 0

Quote from: P00P135 on May 28, 2019, 02:59:36 PM

Quote from: darkCryptoMiner on May 28, 2019, 02:52:43 PM

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

I can try that - it dies before any mining though - The rxboost without strap is stable

P00P135

full member

Activity: 1124

Merit: 136

Quote from: darkCryptoMiner on May 28, 2019, 02:52:43 PM

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Try 2000 mem and work your way up to something stable?

darkCryptoMiner

newbie

Activity: 30

Merit: 0

On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6

cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1

The above works correctly and go from 30.5mh to 31.5mh

Trying the straps 0,1...7 @2200 just crashes the rig

They are all hynix except 1 is micron

Any suggestions on what to try to stop the crashing?

I.tried just strap 1,with the same crashing

Er0l

newbie

Activity: 36

Merit: 0

Quote from: Lunga Chung on May 28, 2019, 01:15:29 PM

Quote from: Er0l on May 28, 2019, 01:11:38 PM

Quote from: boatznhoes on May 28, 2019, 12:53:46 PM

Quote from: Claymore on May 28, 2019, 04:00:07 AM

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

are the values the same in smos for rxboost like in win version of Claymor?

On advanced options set rxboost -i 30 and you are done

Sukerl

newbie

Activity: 1

Merit: 0

Hi there!

I'm having problems with version 14.6 on Linux. I have 6 RX580 cards (all the same kind) running fine on version 12.0 but on version 14.6 there are only 3 cards shown. Switching back to 12.0 resolves the problem.

I use build 737 as mentioned a few posts back, see logs below.

Best regards

Sukerl

Code:

21:12:51:551	747580c0	����������������������������������������������������������������ͻ
21:12:51:551	747580c0	�                Claymore's Dual GPU Miner - v14.6               �
21:12:51:551	747580c0	�              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             �
21:12:51:551	747580c0	����������������������������������������������������������������ͼ
21:12:51:551	747580c0	
21:12:51:551	747580c0	b737 
21:12:51:751	747580c0	ETH: 6 pools are specified
21:12:51:751	747580c0	Main Ethereum pool is eu1.ethermine.org:4444
21:12:58:336	747580c0	OpenCL platform: AMD Accelerated Parallel Processing
21:12:58:337	747580c0	OpenCL initializing...

21:12:58:337	747580c0	AMD Cards available: 3 
21:12:58:337	747580c0	GPU #0: Ellesmere (Radeon RX 580 Series), 8172 MB available, 36 compute units (pci bus 1:0:0)
21:12:58:337	747580c0	GPU #0 recognized as Radeon RX 480/580
21:12:58:337	747580c0	GPU #1: Ellesmere (Radeon RX 580 Series), 8180 MB available, 36 compute units (pci bus 2:0:0)
21:12:58:337	747580c0	GPU #1 recognized as Radeon RX 480/580
21:12:58:337	747580c0	GPU #2: Ellesmere (Radeon RX 580 Series), 8180 MB available, 36 compute units (pci bus 3:0:0)
21:12:58:337	747580c0	GPU #2 recognized as Radeon RX 480/580
21:12:58:337	747580c0	POOL/SOLO version
21:12:58:337	747580c0	Platform: Linux
21:12:58:341	747580c0	AMD ADL library not found.
21:12:58:343	747580c0	amdgpu cnt: 5
21:12:58:349	747580c0	start building OpenCL program for GPU 0...
21:12:58:823	747580c0	done
21:12:59:026	747580c0	start building OpenCL program for GPU 1...
21:12:59:140	747580c0	done
21:12:59:347	747580c0	start building OpenCL program for GPU 2...
21:12:59:461	747580c0	done
21:12:59:702	747580c0	GPU #0: algorithm ASM 1
21:12:59:808	747580c0	GPU #1: algorithm ASM 1
21:12:59:908	747580c0	GPU #2: algorithm ASM 1
21:12:59:908	747580c0	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
21:12:59:908	747580c0	No NVIDIA CUDA GPUs detected.
21:12:59:908	747580c0	Total cards: 3

Divinity666

jr. member

Activity: 312

Merit: 2

Is there a command to shorten the delay when Claymore loses the pool and tries to reconnect? It's 20 seconds by default which is way to long if u ask me...

ayiphelmy

copper member

Activity: 416

Merit: 105

Slower in nvidia???

rdbase

legendary

Activity: 2828

Merit: 1497

Join the world-leading crypto sportsbook NOW!

Quote from: IojkinKot on May 28, 2019, 12:43:41 PM

Sapphire rx580 8G Samsung
strap 1
rxboost 1
33,5 Mh/s

1250@2200

This is quite a boost of hashrate just for the addition of this rxboost intergrated into the miner.

Where you getting 31.5mh/s before the boost was initiated?

Lunga Chung

member

Activity: 277

Merit: 23

Quote from: Er0l on May 28, 2019, 01:11:38 PM

Quote from: boatznhoes on May 28, 2019, 12:53:46 PM

Quote from: Claymore on May 28, 2019, 04:00:07 AM

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

are the values the same in smos for rxboost like in win version of Claymor?

Er0l

newbie

Activity: 36

Merit: 0

Quote from: boatznhoes on May 28, 2019, 12:53:46 PM

Quote from: Claymore on May 28, 2019, 04:00:07 AM

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

Correct, you can use amdmemtweak or patched rxboost tool from smos, they locked to their OS by default

boatznhoes

newbie

Activity: 52

Merit: 0

Quote from: Claymore on May 28, 2019, 04:00:07 AM

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

rxboost and strap do not work in linux correct?

IojkinKot

newbie

Activity: 63

Merit: 0

Sapphire rx580 8G Samsung
strap 1
rxboost 1
33,5 Mh/s

1250@2200
http://i66.tinypic.com/2uoszfp.png

ethashpool

newbie

Activity: 19

Merit: 0

Hi Claymore Team,

Are you able to add our config setting to your sample usage list on page 1 of this post?

EthDcrMiner64.exe -epool stratum+tcp://eth.ethashpool.com:3939 -ewal WALLET_ADDRESS -eworker RIG_ID -epsw x -esm 0 -allpools 1 -mode 1

Let me know if there are other information I can provide.

Thanks!

MostWanted

newbie

Activity: 20

Merit: 0

Hi!

Problem with Miner 14.X versions. I use one rig for several clients. For example:
1) 8 x 1060 in one rig;
2) 3 x 1060 - one client;
3) 5 x 1060 - second client.

With 12.0 Miner everything is simple. One instance of Miner (-di 012) and the second instance of Miner (-di 34567). All works fine.

Now I want to use parameters STRAP and SINTENSITY in both instances. But one instance executes fine, and another with error:
Driver is in use, try to start miner with "-driver uninstall" parameter.

Question: how to use one driver name in one instance and another driver name in other instance?

I have 2, 3, 4 instances of Miner and parameters STRAP and SINTENSITY need to in all instances.

nlhk

newbie

Activity: 1

Merit: 0

Quote from: Claymore on May 28, 2019, 04:00:07 AM

I have uploaded Linux build again, please use it, it must write "b737" in the log at the beginning which means latest build number.

Linux CentOS 7.6 + GTX 1060 (Driver : 410.48):
v12.0 : 19.9 Mh/s
v14.6 original : 19.2 Mh/s
v14.6 updated : 20.2 Mh/s

Thanks.

haliavshik

newbie

Activity: 9

Merit: 0

i have a mixed rig with rx570 and gtx1070 in it strap 1 gives 1070 2.5mh; rxboost 1 gives rxs 0.5 mh if i run them in 1 copy of claymore rxs dont get this 0.5mh from rxboost if i run 2 copies of claymore 1 copy cant use straps due to driver is already in use.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 123. (Read 6590757 times)