Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 141.

weenkky

newbie

Activity: 18

Merit: 5

Quote from: br2459 on May 17, 2019, 04:51:58 PM

Quote from: weenkky on May 17, 2019, 03:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

I have an EVGA 1080 but I can only get 29 out of that with strap 1. What is your mem clock set at?

-strap 2@+450 and 1544 Mhz GPU clock Gigabyte Aorus 11Gbps edition (gives ~ 42 at Phoenix + pill)

wpayton34

newbie

Activity: 9

Merit: 0

anybody try dual mining yett?? I havent beable to get the no loss to eth. Im mining eth+keccek 10mh/300mh

lexele

full member

Activity: 190

Merit: 100

Quote from: encycrypto on May 17, 2019, 04:41:49 PM

Quote from: weenkky on May 17, 2019, 03:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Any estimate of 1080 ti? I think it should be at about 48 if the basic 1080 is at 44.

I did some quick tests and got 48/49 with 1080TI while Pill gives 52@160W.
1070 arround 34@100W.

I wonder If it will be stable over night.

percy_tc

full member

Activity: 584

Merit: 106

Quote from: Claymore on May 17, 2019, 04:15:37 PM

Quote from: percy_tc on May 17, 2019, 04:13:59 PM

I can confirm P106-100 getting more hashes. About 26-27Mh/s

P104-100 crashes for me with straps 1/2/3 (even in default clocks). Will see with different driver tomorrow.

You can try this (from Readme):

Code:

-sintensity   strap intensity for Nvidia cards, in %. Use this option to adjust strap intensity for Nvidia cards if even straps with lowest intensity ("-strap 1" and "-strap 4") are unstable on your cards. 
   To find best value, use "-strap 4 -sintensity 1" and see if it is stable. Then increase "-sintensity" value (maximum value is 100) to find best stable hashrate. Then try other "-strap" values.
   You can also specify values for every card, for example "-sintensity 10,0,100,30".
   Default value is "0" which means no changes in default strap settings.

With "-strap 4 -sintensity 95" it runs perfectly. With some tweaking of mem oc, i'm getting 40,8Mh, previously it was 38.9

thanks!

br2459

full member

Activity: 269

Merit: 102

Quote from: weenkky on May 17, 2019, 03:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

I have an EVGA 1080 but I can only get 29 out of that with strap 1. What is your mem clock set at?

encycrypto

member

Activity: 294

Merit: 53

Quote from: weenkky on May 17, 2019, 03:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Any estimate of 1080 ti? I think it should be at about 48 if the basic 1080 is at 44.

Mr.merson

full member

Activity: 200

Merit: 100

there will be support for graphics cards lower than 4GB vram? i mean memory timing

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: percy_tc on May 17, 2019, 04:13:59 PM

I can confirm P106-100 getting more hashes. About 26-27Mh/s

P104-100 crashes for me with straps 1/2/3 (even in default clocks). Will see with different driver tomorrow.

You can try this (from Readme):

Code:

-sintensity strap intensity for Nvidia cards, in %. Use this option to adjust strap intensity for Nvidia cards if even straps with lowest intensity ("-strap 1" and "-strap 4") are unstable on your cards.
   To find best value, use "-strap 4 -sintensity 1" and see if it is stable. Then increase "-sintensity" value (maximum value is 100) to find best stable hashrate. Then try other "-strap" values.
   You can also specify values for every card, for example "-sintensity 10,0,100,30".
   Default value is "0" which means no changes in default strap settings.

percy_tc

full member

Activity: 584

Merit: 106

I can confirm P106-100 getting more hashes. About 26-27Mh/s

P104-100 crashes for me with straps 1/2/3 (even in default clocks). Will see with different driver tomorrow.

RuMiner

member

Activity: 168

Merit: 15

Quote from: ethashpool on May 17, 2019, 02:18:57 PM

Nice! did you have to change the bios or just simply upgrading Claymore?

I've never seen Nvidia firmware flashers for 1060. just updated and added -strap 1 to config

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: weenkky on May 17, 2019, 03:01:59 PM

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Great numbers, they're almost on par with their AMD counterparts.
Seeing how Nvidia is better at most other algos, I guess it makes Nvidias more viable than AMD

weenkky

newbie

Activity: 18

Merit: 5

my tests Claymore v14.4
1050 Ti ~ 17.7 strap 5
1060 6Gb ~ 26.5 to 27.6 strap 1 (depends on card)
1070 ~ 33.5 to 34.7 strap 1 (depends on card)
1080 ~ 44.3 strap 2 (without pill)

Branko

sr. member

Activity: 2632

Merit: 328

So, did someone somewhere tested Nvidia cards with this new miner?
It would be interesting to see results vs AMD cards now that Nvidia straps are modifiable too

ethashpool

newbie

Activity: 19

Merit: 0

Quote from: RuMiner on May 17, 2019, 02:14:12 PM

Quote from: Claymore on May 17, 2019, 12:09:51 PM

v14.4 Beta:

- improved mining speed for Nvidia cards by about 1%

wow, P106 now gives 27.3 like red 474 Nitros+ ) thanks

Nice! did you have to change the bios or just simply upgrading Claymore?

RuMiner

member

Activity: 168

Merit: 15

Quote from: Claymore on May 17, 2019, 12:09:51 PM

v14.4 Beta:

- improved mining speed for Nvidia cards by about 1%

wow, P106 now gives 27.3 like red 474 Nitros+ ) thanks

ethashpool

newbie

Activity: 19

Merit: 0

See below for bat/bash file settings to connect with Ethashpool.

https://ethashpool.com/eth

Ethashpool Ethereum

Code:

EthDcrMiner64.exe -epool stratum+tcp://eth.ethashpool.com:3939 -ewal WALLET_ADDRESS -eworker RIG_ID -epsw x -esm 0 -allpools 1 -mode 1

Is it possible to have this sample included on the original posting under the Ethereum sample configs?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v14.4 Beta:

- improved mining speed for Nvidia cards by about 1% (depends on card model). Note that dual mining for Nvidia cards suffers from this optimization, use old versions if you use dual mining on Nvidia cards.
- a bit reduced intensity of all Nvidia straps.
- added "-sintensity" option to adjust strap intensity for Nvidia cards, see Readme for details.

evlo

jr. member

Activity: 155

Merit: 4

Quote from: br2459 on May 16, 2019, 05:50:44 PM

Quote from: evlo on May 16, 2019, 05:32:28 PM

wtf is straps on nvidia cards? Can you really change gddr5 nvidia timings?

Have heard of the eth pill? I believe it did the same thing but with the GDDR5X mem on the 1080/1080TIs. So why would it not work with regular GDDR5?

Because there is no public info how to do it?

Slavon4ik

newbie

Activity: 10

Merit: 0

Quote from: sharmanov on May 17, 2019, 10:17:56 AM

so... the -strap is for NVIDIA cards only? this will not have any effect on my Radeon VII? also should i run the pill with the -strap on 1080ti cards?

Hard to read Readme!!!.txt? The pill can't be used.

sharmanov

newbie

Activity: 54

Merit: 0

so... the -strap is for NVIDIA cards only? this will not have any effect on my Radeon VII? also should i run the pill with the -strap on 1080ti cards?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 141. (Read 6590757 times)