@Claymore
great job man!
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1387. (Read 6590757 times)
April 17, 2016, 07:05:26 PM
April 17, 2016, 05:20:52 PM
Is that really need to 1-2 weeks for solo ver. Is that so hard to implement ? Your vers 2.0 is very nice already.
April 17, 2016, 05:20:27 PM
anyone using Sapphire 280x vapor? im getting only like 19Mh on those aint that to low?
April 17, 2016, 05:17:12 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....
the same in claymores miner.....
same here - all good, zero invalids.... hard to believe...
even during using qtminer.exe, i do get a few invalids but not much.
I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.
Well those numbers are incorrect, because every time that it starts to mine for dev the number of is reset when the worker reconnects to the pool - according to pool description on bottom of the page :>
April 17, 2016, 04:58:03 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
Can you port it to linux, too.
If its not a big problem.
April 17, 2016, 04:21:20 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?
You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.
Pls try it out: http://dwarfpool.com/exp
Ok I'll check it.
April 17, 2016, 04:18:29 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
I'm curious
April 17, 2016, 04:17:02 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?
You can mine any Dagger-Hashimoto coin with any ethminer (original or Genoil)...
It doesn't work, tried both Dwarf and suprnova... just disconnects and trying to reconnect.
Pls try it out: http://dwarfpool.com/exp
April 17, 2016, 04:01:03 PM
I'm working on next update:
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
- Further improvements related to DAG files, for example, even better stability when new epoch is coming, perhaps you already noticed that miner did not crash at new epoch #45 as official miner usually does.
- Performance improvements for weak cards and Fury.
- Checking shares on CPU and warn if GPU calculates them incorrectly (usually due to overclocking).
April 17, 2016, 03:57:47 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
Devfee is not a problem. It is something related to tech part.
As far as I understand, you cannot mine these coins with ethminer from Ethereum, you have to use ethminer from Expanse, am I correct?
April 17, 2016, 03:40:24 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
These coins are automatically supported. As in conventional miners.
It doesn't work... probably due to dev fee.
April 17, 2016, 03:38:43 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
These coins are automatically supported. As in conventional miners.
April 17, 2016, 02:49:03 PM
Claymore - any plans to add ETH clones support, such as soil, expanse etc?
April 17, 2016, 02:30:18 PM
miner config:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x...... -epsw x -ethi 16 -esm 0 -dpool stratum+tcp://dcr.pool.mn:4800 -dwal ....... -dpsw ......... -dcri 20 -mode 0
pause
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x...... -epsw x -ethi 16 -esm 0 -dpool stratum+tcp://dcr.pool.mn:4800 -dwal ....... -dpsw ......... -dcri 20 -mode 0
pause
April 17, 2016, 02:14:00 PM
dcr pool.mn
2-2.5% invalid only
i have now 730 valid--18 invalid
2-2.5% invalid only
i have now 730 valid--18 invalid
April 17, 2016, 01:56:01 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....
the same in claymores miner.....
same here - all good, zero invalids.... hard to believe...
even during using qtminer.exe, i do get a few invalids but not much.
I wish i can say the same for DCR, my pool have 8-9% average invalids/rejects.
April 17, 2016, 01:55:03 PM
Claymore
Dear friend! There is a good and profitable algorithm qubit, which little load cards like the ETH, what do you think about this? DCR very heavy card, so it gives only 20% of the single mode and the qubit will probably fall slightly in tandem with ETH, and possibly will not fall at all!
DGB-Qubit(DGB) is a good profit coin now http://www.whattomine.com
x13 and x15 little load cards so but not so profitable
Monero most little load but small profit
Dear friend! There is a good and profitable algorithm qubit, which little load cards like the ETH, what do you think about this? DCR very heavy card, so it gives only 20% of the single mode and the qubit will probably fall slightly in tandem with ETH, and possibly will not fall at all!
DGB-Qubit(DGB) is a good profit coin now http://www.whattomine.com
x13 and x15 little load cards so but not so profitable
Monero most little load but small profit
April 17, 2016, 01:48:45 PM
ethermine.org here shows 64 valid and 0 invalid....
the same in claymores miner.....
the same in claymores miner.....
April 17, 2016, 12:07:57 PM
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).
Claymore's miner does submit ( and only valids!
) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).Mine are not showing up as well, but I swear it was working with 1.2 (maybe but I was drinking at the time)...
April 17, 2016, 11:39:04 AM
Does anyone have shares displayed correctly on ethermine.org ? I mean in the "Shares (Invalid / Valid / %)" column..
Claymore's miner does submit ( and only valids! ) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).
Claymore's miner does submit ( and only valids!
) and I am obviously getting paid for them, but they're not displayed like I said (tried both with v1.2 and with v2.0).yes, i have same issue.
I am still paid but the dashboard (bottom page with graphs) doesn't report any hash and funny thing is the summary on top of the ethermine.org, it correctly sum up total mhs for all my rigs. I suspect its the way etherminer is coded but then again qtminer.exe works too, but not the dual miner.
Put -esm 1 in your bat
thanks dominuspro for the tip.....
... but still dont work for me
Mine 390 works without any problem on win7x64, crimson 15.12...
Everything reported properly poolside. It was allready with the first version of the miner.
bat file:
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxx.390 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal xxx.xxx1 -dpsw 1 -esm 1
Code:
ETH: 04/17/16-18:22:29 - New job (target 0x0000000112e0be82) from eu1.ethermine.org:4444
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
DCR: GPU0 479.955 Mh/s
ETH - Total Speed: 31.997 Mh/s, Total Shares: 295, Rejected: 0, Time: 10:26
ETH: GPU0 31.997 Mh/s
DCR - Total Speed: 479.955 Mh/s, Total Shares: 2143, Rejected: 37
DCR: GPU0 479.955 Mh/s
hi dominuspro -- yes, it works!
had to wait for a few more minutes for its to show and visible now.
-ems 1 gave results "qtminer.exe mode" which is great because qtminer is better with stratum unlike get work method by ethminer.exe
Jump to: