Both v14.2 do BSOD with Vega and 19.5.1 when I use -strap.
PAGE_FAULT_IN_NONPAGED_AREA
cmdrv64.sys
Strap Drivers are already in use when you load another instance of the miner. Here is log from b711 version :
01:37:11:329 fcc Driver is not installed! Trying to install it...
01:37:11:373 fcc Driver is in use, try to start miner with "-driver uninstall" parameter.
01:37:11:792 fcc SSL: Imported 76 certificates from local storage
Rgds
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 144. (Read 6590757 times)
May 15, 2019, 07:17:47 PM
May 15, 2019, 05:48:11 PM
i get more hash with phoenix miner, so could be that some of my settings are wrong, or?
May 15, 2019, 05:43:34 PM
2 Claymore
gtx1080tis are here, driver 425.31
-strap 1 - low 40+ hashrate, but system is stable
-strap 2 - need to apply only with std mem clock. Can raise mem clock after miner started and reach fantastic 56.5mhz but if miner closes then system crashes. Need to lower mem clock before exit.
I have my P2 cuda states disabled by the way to prevent memory clock spikes between different P-states switches.
-strap 3 - system crashes even with -502 mem clock.
So, it looks promising but unusable. Get back to EthPill and 55mhs stable and no crashes when miner starts or exits
gtx1080tis are here, driver 425.31
-strap 1 - low 40+ hashrate, but system is stable
-strap 2 - need to apply only with std mem clock. Can raise mem clock after miner started and reach fantastic 56.5mhz but if miner closes then system crashes. Need to lower mem clock before exit.
I have my P2 cuda states disabled by the way to prevent memory clock spikes between different P-states switches.
-strap 3 - system crashes even with -502 mem clock.
So, it looks promising but unusable. Get back to EthPill and 55mhs stable and no crashes when miner starts or exits
May 15, 2019, 05:33:16 PM
How do you remove the driver installed by EthDcr...exe ?
Code:
-driver uninstall
May 15, 2019, 05:23:59 PM
How do you remove the driver installed by EthDcr...exe ?
May 15, 2019, 05:19:24 PM
no success with P104/P106 GPUs on 425.31 driver/Win10 1709.
with -strap 1 the miner runs for several seconds then hashrate for all cards drops to zero, and the rig can reboot with a dpc_watchdog_violation BSoD.
with -strap 2 - incorrect shares then MEMORY_MANAGEMENT BSoD.
am I doing something wrong?
with -strap 1 the miner runs for several seconds then hashrate for all cards drops to zero, and the rig can reboot with a dpc_watchdog_violation BSoD.
with -strap 2 - incorrect shares then MEMORY_MANAGEMENT BSoD.
am I doing something wrong?
May 15, 2019, 05:11:41 PM
This is great stuff!
Will the driver installed by EthDcr...exe have any negative impact on other use of the PC like gaming?
Or can I just turn compute on or off and reboot to go from gaming to mining and back?
Will the driver installed by EthDcr...exe have any negative impact on other use of the PC like gaming?
Or can I just turn compute on or off and reboot to go from gaming to mining and back?
May 15, 2019, 04:47:41 PM
Thanks, now it works ) +6% on P106 with just adding -strap 1 with no other changes
May 15, 2019, 04:19:55 PM
14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
Ok, I uploaded v14.2 again, added cuda8 build. Download v14.2 again and take files from "cuda8" folder if cuda10 does not work for you.
May 15, 2019, 04:05:25 PM
14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
I have the same issues with my NVIDIA rigs. I just copied the miner .exe from 12 to the 14 folder and it works fine. It still runs the old 12 code but it at least runs.
May 15, 2019, 03:53:42 PM
14.2 is not working with P106 with its native mining drivers (orinary drivers from nvidia.com are not suitable)
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
23:48:41:857 d28 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
23:48:41:857 d28 No NVIDIA CUDA GPUs detected.
23:48:41:857 d28 No AMD OPENCL or NVIDIA CUDA GPUs found, exit
14.0 works OK
May 15, 2019, 03:52:04 PM
@Claymore.
You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?
Ha, ha. You are great optimist. What do you expect that pill makes - it does the same as Claymore straps. If you add -strap 3 to command line (or config file) ten times will you get 500 MH/S? You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?
May 15, 2019, 03:31:27 PM
@Claymore.
You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?
You say "up to 50% speedup for 1080Ti". Did you really mean about 75MH/s (50MH/s with magic pill .exe + 50%) ?
May 15, 2019, 03:03:27 PM
v14.2 Beta - Supercharged Edition: 
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"
when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas
yes idea is to 'must run miner with admin rights'.
properti compatibility run this program administrator
Thanks I got past that , but now I get the It says it cannot apply strap setting to this device. for all four vega 56 cards
I am running 19.4.3 if that helps any
May 15, 2019, 02:42:18 PM
v14.2 Beta - Supercharged Edition:
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"
when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas
yes idea is to 'must run miner with admin rights'.
properti compatibility run this program administrator
May 15, 2019, 02:23:49 PM
v14.2 Beta - Supercharged Edition:
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
This might have been answered but i cant find it, I keep getting "You must run miner with admin rights"
when i try the strap command , I am running it normal like i used to using the start.bat and the config files , any ideas
May 15, 2019, 01:53:48 PM
where linux version 14.x ?
May 15, 2019, 01:13:11 PM
v14.2 Beta - Supercharged Edition:
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
- "strap" option: added support for Nvidia 10xx cards, up to 10% speedup for 1050/1060/1070 cards, up to 50% speedup for 1080/1080Ti cards compared to stock BIOS.
Use "-strap 1" ... "-strap 3" values and overclock memory to find the best hashrate.
- a few minor bug fixes and improvements.
May 15, 2019, 11:27:40 AM
Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.1 (Windows/Linux) added to https://www.minermonitoring.com/
Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark
May 15, 2019, 10:55:28 AM
Got my stock bios rx 580 and I keep right clicking the batch and run as administrator and it keeps saying this. "Failed, you must run miner with admin rights." in red text. Please Help
right click on the ethminer64.exe file and check the "run as administrator" option. and then run the .bat file
Jump to: