Honestly I've been following Claymore for years and he seems like a good individual. I don't think he is in jail or dead. He made so much money legally why would he resort to crime, doesn't make sense.
However very strange to just disappear like that. Very unprofessional. Many developers in Crypto in the past when they stopped developement they usually stated why and just left, instead of just becoming a ghost.
He loses money due to this simple fix and wonder how rich he must be not to want the extra income.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 21. (Read 6590718 times)
October 05, 2020, 08:53:06 PM
October 05, 2020, 11:11:42 AM
Hi guys, hope you are doing well today.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.
Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.
I supposed something like that. So, we are using an out of date software that is not being maintained and is causing problems due to the developer lack of commitment. Is he even alive? I can't believe someone could just let the golden eggs chicken and just leave. Anyway, hope he fixes the problem.
Thanks for letting me know...
There are plenty of other capable miners that mining as well if not better than Claymore (at least on the pool reported hashes end). Just because a miner says it's giving a high rate doesn't neccessarily mean it is performing the best. A lot of lazy miners don't bother looking to make sure the pool side is reflecting what the terminal side says. If dual mining was still viable this miner would be decent but those days have for the most part passed.
Hi, thanks for your response. In my case it is not about lazy it's about knowledge. I will search for new miners then. It is a shame Claymore has this problems, it is a very good software. Any chance you could point the name of some better software you are aware of?
Thanks a lot.
October 05, 2020, 09:17:12 AM
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
86.5. For 2080 Ti with +300 mem OC it's 52.7.
Was 86.5 mh the fastest you could get with Ethminer?
I didn't do any additional OC outside of what manufacturer did yet. Only power limiting. I'd guess it can do a bit more. Especially since 3090 mem has a lil bit higher frequency and it's based on same memory modules from what I know.
Others were getting around ~100 mh at around ~250watts for the 3080 when overclocked, but these were on various non-open source miners. It'll be interesting to see what Ethminer can do with the 3080 overclocked.
True. Got to 100 with OC. Mem running at amazing 21200 MHz. Fantastic card. My 2080 ti maxed out at something like 58.
October 05, 2020, 04:14:22 AM
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
86.5. For 2080 Ti with +300 mem OC it's 52.7.
Was 86.5 mh the fastest you could get with Ethminer?
I didn't do any additional OC outside of what manufacturer did yet. Only power limiting. I'd guess it can do a bit more. Especially since 3090 mem has a lil bit higher frequency and it's based on same memory modules from what I know.
Others were getting around ~100 mh at around ~250watts for the 3080 when overclocked, but these were on various non-open source miners. It'll be interesting to see what Ethminer can do with the 3080 overclocked.
October 05, 2020, 04:00:54 AM
Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.
Islands that programmers go to usually have internet connection. Wasting a ton of money like that, I would rather guess he's not alive anymore, or imprisoned. Or maybe lost his hands, eyes, whatever. Of course, these things have very low base likelihood, but other options just don't make any logical sense I can think of.
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
86.5. For 2080 Ti with +300 mem OC it's 52.7.
Was 86.5 mh the fastest you could get with Ethminer?
I didn't do any additional OC outside of what manufacturer did yet. Only power limiting. I'd guess it can do a bit more. Especially since 3090 mem has a lil bit higher frequency and it's based on same memory modules from what I know.
October 05, 2020, 03:54:55 AM
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
86.5. For 2080 Ti with +300 mem OC it's 52.7.
Was 86.5 mh the fastest you could get with Ethminer?
October 05, 2020, 01:27:04 AM
Hi guys, hope you are doing well today.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.
Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.
I supposed something like that. So, we are using an out of date software that is not being maintained and is causing problems due to the developer lack of commitment. Is he even alive? I can't believe someone could just let the golden eggs chicken and just leave. Anyway, hope he fixes the problem.
Thanks for letting me know...
There are plenty of other capable miners that mining as well if not better than Claymore (at least on the pool reported hashes end). Just because a miner says it's giving a high rate doesn't neccessarily mean it is performing the best. A lot of lazy miners don't bother looking to make sure the pool side is reflecting what the terminal side says. If dual mining was still viable this miner would be decent but those days have for the most part passed.
October 05, 2020, 12:52:14 AM
Hi guys, hope you are doing well today.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.
Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.
I supposed something like that. So, we are using an out of date software that is not being maintained and is causing problems due to the developer lack of commitment. Is he even alive? I can't believe someone could just let the golden eggs chicken and just leave. Anyway, hope he fixes the problem.
Thanks for letting me know...
October 05, 2020, 12:35:51 AM
Hi guys, hope you are doing well today.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.
Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.
October 04, 2020, 07:21:05 PM
Hi guys, hope you are doing well today.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.
October 04, 2020, 03:25:19 PM
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
86.5. For 2080 Ti with +300 mem OC it's 52.7.
October 04, 2020, 12:38:11 PM
What is the alternative coin for 4gb rx570,580 and 470
I have 75 pieces. All 4gb. I Try to ravencoin but not good mining for money
I have 75 pieces. All 4gb. I Try to ravencoin but not good mining for money
October 04, 2020, 06:48:29 AM
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
What hashrate does Ethminer give you for the 3080?
October 04, 2020, 06:22:56 AM
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
It seems that Claymore miner doesn't support CUDA 10 on Linux, try to switch on another miner. It can be Phoenix Miner, Team Red Miner or T-rex miner for example.For reference: [Linux] Claymore fails with GpuMiner cu_kd failed 8 (0)
I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).
October 04, 2020, 05:40:02 AM
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
It seems that Claymore miner doesn't support CUDA 10 on Linux, try to switch on another miner. It can be Phoenix Miner, Team Red Miner or T-rex miner for example.For reference: [Linux] Claymore fails with GpuMiner cu_kd failed 8 (0)
October 04, 2020, 05:11:29 AM
Try mining just eth and not dual mining. If it works at least you can mine the profitable one.
In case that wasn't already the case (I believe it was), I tried specifying -mode 1 and got
Quote
ETH: 1 pool is specified
Main Ethereum pool is eth-eu1.nanopool.org:9999
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...
NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5 (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6 (pci bus 3:0:0)
Total cards: 2
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <151.80.59.84> port 9999 (unsecure)
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #366(3.86GB)...
ETH: 10/04/20-13:09:32 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-13:09:34 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:37 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
Setting DAG epoch #366 for GPU0
GPU 1 failed
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
ETH: 10/04/20-13:09:40 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 1 failed
GPU 0 failed
ETH: 10/04/20-13:09:43 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:46 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:49 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:52 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU0 t=60C fan=41% P=53W, GPU1 t=43C fan=0% P=104W
Total GPUs power consumption: 157 Watts
WATCHDOG: GPU error, you need to restart miner
Main Ethereum pool is eth-eu1.nanopool.org:9999
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...
NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5 (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6 (pci bus 3:0:0)
Total cards: 2
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <151.80.59.84> port 9999 (unsecure)
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized
Setting DAG epoch #366(3.86GB)...
ETH: 10/04/20-13:09:32 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-13:09:34 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:37 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
Setting DAG epoch #366 for GPU0
GPU 1 failed
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
ETH: 10/04/20-13:09:40 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 1 failed
GPU 0 failed
ETH: 10/04/20-13:09:43 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:46 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:49 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:52 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU0 t=60C fan=41% P=53W, GPU1 t=43C fan=0% P=104W
Total GPUs power consumption: 157 Watts
WATCHDOG: GPU error, you need to restart miner
October 04, 2020, 04:25:33 AM
New project EthereumPill release
LINK REMOVED DUH
Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
LINK REMOVED DUH
Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
Somebody must be getting some serious traction to keep posting these same scam github links for the Eth pill. I wonder if the mods have a forum filter that could be applied without filtering half of the Ethereum posts. I reported the offending post already.
Noobs, in case you don't know, there are a lot of hacked/sold accounts posting links to a fake GITHUB with malware.
October 04, 2020, 04:24:24 AM
New project EthereumPill release
Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
this is a FAKE TROJAN PILL
SCAM DONT DOWNLOAD
October 03, 2020, 10:41:30 PM
teamredminer stopped working too for 4gb cards
nofor me yes, only 8gb working
October 03, 2020, 09:08:44 PM
teamredminer stopped working too for 4gb cards
no Jump to: