Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 22.

yoonline

newbie

Activity: 51

Merit: 0

teamredminer stopped working too for 4gb cards Sad

miner29

full member

Activity: 1275

Merit: 141

Quote from: monkeeeey on October 03, 2020, 04:20:12 PM

v15.0 doesn't seem to work for me on Linux for NVidia, driver version 455/cuda11.1.

Quote

You specified default wallet address, it is good for tests only, for normal mining you must change it to your wallet address!
ETH: 1 pool is specified
Main Ethereum pool is us1.ethpool.org:3333
DCR: 1 pool is specified
Main Decred pool is dcr.suprnova.cc:3252
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5 (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6 (pci bus 3:0:0)
Total cards: 2
ETH: Stratum - connecting to 'us1.ethpool.org' <172.65.229.54> port 3333 (unsecure)
ETH: Stratum - Connected (us1.ethpool.org:3333) (unsecure)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

DCR: Stratum - connecting to 'dcr.suprnova.cc' <104.248.240.136> port 3252 (unsecure)
DCR: Stratum - Connected (dcr.suprnova.cc:3252) (unsecure)
Socket was closed remotely (by pool)
DCR: Job timeout, disconnect, retry in 20 sec...
Setting DAG epoch #366(3.86GB)...
server: bind failed with error: 98 (check -mport option value), next attempt in 20sec...
ETH: 10/04/20-00:09:29 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-00:09:33 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:34 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
GPU 1 failed
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
Quit signal received...
Quit, please wait...
GPU 0 failed
GPU 1 failed

Try mining just eth and not dual mining. If it works at least you can mine the profitable one.

monkeeeey

newbie

Activity: 6

Merit: 4

v15.0 doesn't seem to work for me on Linux for NVidia, driver version 455/cuda11.1.

Quote

You specified default wallet address, it is good for tests only, for normal mining you must change it to your wallet address!
ETH: 1 pool is specified
Main Ethereum pool is us1.ethpool.org:3333
DCR: 1 pool is specified
Main Decred pool is dcr.suprnova.cc:3252
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5 (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6 (pci bus 3:0:0)
Total cards: 2
ETH: Stratum - connecting to 'us1.ethpool.org' <172.65.229.54> port 3333 (unsecure)
ETH: Stratum - Connected (us1.ethpool.org:3333) (unsecure)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

DCR: Stratum - connecting to 'dcr.suprnova.cc' <104.248.240.136> port 3252 (unsecure)
DCR: Stratum - Connected (dcr.suprnova.cc:3252) (unsecure)
Socket was closed remotely (by pool)
DCR: Job timeout, disconnect, retry in 20 sec...
Setting DAG epoch #366(3.86GB)...
server: bind failed with error: 98 (check -mport option value), next attempt in 20sec...
ETH: 10/04/20-00:09:29 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-00:09:33 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:34 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
GPU 1 failed
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
Quit signal received...
Quit, please wait...
GPU 0 failed
GPU 1 failed

adaseb

legendary

Activity: 3808

Merit: 1723

It seems almost every week that fake pill software is being pushed. At first it was clearly a scam because it was promoted by some newbie account, however it seems that more and more people are posting the link from a higher rank member and people are falling for it.

Most people they look at a link, then they check who posted it, if it someone with a fairly aged account, it establishes trust and people end up falling for the download. I guess that hacker is buying old accounts on Bitcointalk and starting to get clever.

So in the future, which will probably be in a few days or so since its so frequent, when you see this posted anywhere in the mining section, click the report link ASAP and the mods usually remove it fairly quickly. And whatever you do, don't requote the link posted.

Lafu

legendary

Activity: 3136

Merit: 3213

Quote from: ?? on ??

New project EthereumPill release

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus Huh

@Asthix
@ivcelmik
@john1010

Can you please remove the link from your Quoted post you have done !!
Its an Malware download Link , just to be sure nobody click on it and gets infected with that shit .
Dont use it , your Account will be hacked after that possible, we got that in the past already .

Regards Lafu

scryptr

legendary

Activity: 1797

Merit: 1028

IF YOU QUOTE THE LINK, IT STAYS ALIVE--

The moderator is deleting the posts as soon as they are being reported.

Just report them with the button. Quoting them is a waste. --scryptr

Quote from: ?? on ??

New project EthereumPill release

More info: MALICIOUS LINK DELETED

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus Huh

john1010

hero member

Activity: 2100

Merit: 562

Quote from: ivcelmik on October 03, 2020, 03:34:48 AM

Quote from: ?? on ??

New project EthereumPill release

More info: https://github.com/EthereumPill/PillForETH/releases/tag/1.0.0

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus Huh

Do not use that they trying to access your ledger live! it should be removed from Git

I don't know why there';s so many members here are so too stubborn, some of the mod and admin here give their warnings about using this EthereumPill, because they've found that someone is using this application to access our computer specially our wallet and also the ledger, but this people are always making a post about it.

bluspirit

jr. member

Activity: 70

Merit: 3

Quote from: vapourminer on October 02, 2020, 04:13:22 PM

that sounds about right. the only disadvantage is if you add oddball hardware you need to install the drivers manually. which isnt a big deal on a rig that doesnt see hardware changes for long periods of time.

Thx, totally agree.

Quote from: john1010 on October 02, 2020, 11:59:13 PM

One of my rig updated to windows version 2004 and it seems that there is no changes in all my cards and also to mining speed, I have sapphire nitro+ rx 570 8gb and also the radeon software automatically updated to radeon 20.9.2

I see automatic updates as a lottery for a mining rig: everything could work as before, better or worse.
Therefore I prefer to block all automatic updates and manually install / test the version of video drivers I prefer, having the possibility to uninstall the previous drivers with DDU.
I can always revert back the standard configuration to re-enable automatic updates if I need them.
I just hope that guide still works for latest Win 10 releases.

ivcelmik

sr. member

Activity: 519

Merit: 250

Quote from: ?? on ??

New project EthereumPill release

More info: https://github.com/EthereumPill/PillForETH/releases/tag/1.0.0

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus Huh

Do not use that they trying to access your ledger live! it should be removed from Git

superquaid

member

Activity: 103

Merit: 10

yesterday, the hashrate dropped to 10 mh/s on all gpus, I understand it's time to update the drivers? I haven't updated it in months

shbour

member

Activity: 92

Merit: 10

Hello, pls help me, when i run Claymore, get error - not enough virtual memory, how can I increase it?

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: xandry on September 23, 2020, 12:08:15 AM

Quote from: Dowper_ on September 20, 2020, 01:55:42 AM

Use PhoenixMiner.

Or he can switch to Linux.

I'm on Linux yet and I tried also PhoenixMiner without luck, I think these cards reached their end of life (for ethash at least).

I read about downgrade the Nvidia driver but don't know if it could work and for how long.

DrX

member

Activity: 233

Merit: 20

Quote from: ?? on ??

Quote from: dzap on October 02, 2020, 03:24:58 PM

ETC stopped mining for me as well on SMOS, ETH works fine. RX580 8GB cards... heck will need to move to another miner as well Sad

I have already file an issue on Claymore's GitHub. I hope it will be an update soon.
I can confirm that ETH is mining ok.

I dont think Claymore has GitHub, most likely its fake.

And only download the miner from threads first page.

https://bitcointalksearch.org/topic/claymores-dual-ethereum-amdnvidia-gpu-miner-v150-windowslinux-1433925

john1010

hero member

Activity: 2100

Merit: 562

Quote from: bluspirit on October 02, 2020, 02:54:02 PM

Quote from: vapourminer on October 02, 2020, 12:08:49 PM

Quote from: adaseb on October 02, 2020, 01:35:19 AM

Are you using Windows 10? Then most likely it was some forced Windows update which included new drivers for your AMD GPUs. I ran into this problem a few times in the past. It would either not hash at all because all the overclocking settings were reset OR it would hash at a slow speed because compute mode was disabled by default.

It was a pain in the butt to disable but somehow with some reg hack I was able to prevent any updates from happening again. Search the web and there is a guide on how to disable Windows 10 updates. Its pretty indepth and you need to block access to certain DNS hosts.

there are (or were) a couple services that i disabled in win10 1709 and that machine has not updated since. pretty sure i didnt do any dns stuff (for instance my hosts file is still stock). but again that version 1709.

that was from a guide i found online a couple years ago. so i have no idea where i got it or if that method (disabling various services only) still works.

I'm still on version 1709 too.
Here is that guide:

1) How to Disable Drivers Update in Windows 10:
Windows key+R > Type gpedit.msc and hit Enter > Navigate to: Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Do not include drivers with Windows Update" and set it to Enabled.

2) How to Disable Windows 10 Update:
Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Configure Automatic Updates" and set it to Disabled.

One of my rig updated to windows version 2004 and it seems that there is no changes in all my cards and also to mining speed, I have sapphire nitro+ rx 570 8gb and also the radeon software automatically updated to radeon 20.9.2

yoonline

newbie

Activity: 51

Merit: 0

teamredminer stop working too for 4gb Sad

jpmou

newbie

Activity: 3

Merit: 0

Quote from: xandry on October 02, 2020, 02:32:27 AM

Quote from: jpmou on September 30, 2020, 02:15:47 PM

Hi, I have a problem, I have a rig with 5 GPU RX580 8GB - W10 - Claymore 15. With ethereum I have no errors and they are 158MHS total. But with ETC I get error OpenCL - 38 - cannot write buffer for dag. What's going on?
Thank you!

Do you have environment variables from README in your bat file? I mean these lines:

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

I have found that it help with this error.

thks, I have that in my .bat. Still it doesn't work

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: bluspirit on October 02, 2020, 02:54:02 PM

Quote from: vapourminer on October 02, 2020, 12:08:49 PM

there are (or were) a couple services that i disabled in win10 1709 and that machine has not updated since. pretty sure i didnt do any dns stuff (for instance my hosts file is still stock). but again that version 1709.

that was from a guide i found online a couple years ago. so i have no idea where i got it or if that method (disabling various services only) still works.

I'm still on version 1709 too.
Here is that guide:

1) How to Disable Drivers Update in Windows 10:
Windows key+R > Type gpedit.msc and hit Enter > Navigate to: Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Do not include drivers with Windows Update" and set it to Enabled.

2) How to Disable Windows 10 Update:
Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Configure Automatic Updates" and set it to Disabled.

that sounds about right. the only disadvantage is if you add oddball hardware you need to install the drivers manually. which isnt a big deal on a rig that doesnt see hardware changes for long periods of time.

dzap

newbie

Activity: 20

Merit: 0

ETC stopped mining for me as well on SMOS, ETH works fine. RX580 8GB cards... heck will need to move to another miner as well Sad

bluspirit

jr. member

Activity: 70

Merit: 3

Quote from: vapourminer on October 02, 2020, 12:08:49 PM

Quote from: adaseb on October 02, 2020, 01:35:19 AM

Are you using Windows 10? Then most likely it was some forced Windows update which included new drivers for your AMD GPUs. I ran into this problem a few times in the past. It would either not hash at all because all the overclocking settings were reset OR it would hash at a slow speed because compute mode was disabled by default.

It was a pain in the butt to disable but somehow with some reg hack I was able to prevent any updates from happening again. Search the web and there is a guide on how to disable Windows 10 updates. Its pretty indepth and you need to block access to certain DNS hosts.

there are (or were) a couple services that i disabled in win10 1709 and that machine has not updated since. pretty sure i didnt do any dns stuff (for instance my hosts file is still stock). but again that version 1709.

that was from a guide i found online a couple years ago. so i have no idea where i got it or if that method (disabling various services only) still works.

I'm still on version 1709 too.
Here is that guide:

1) How to Disable Drivers Update in Windows 10:
Windows key+R > Type gpedit.msc and hit Enter > Navigate to: Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Do not include drivers with Windows Update" and set it to Enabled.

2) How to Disable Windows 10 Update:
Computer Configuration > Administrative Templates > Windows Components > Windows Update.
Double-click "Configure Automatic Updates" and set it to Disabled.

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: ?? on ??

Anyone can explain why I cannot mine using Claymore's Miner anymore?

Up to yesterday there was no problem with mining on my two rigs with 2 and 3 Vega 64. Both on Windows 10. Different builds ( update disabled, drivers update disabled). On one rig I had to restart the miner but after the restart that message showed up:

GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU2, OpenCL error -38 - cannot write buffer for DAG
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU0, OpenCL error -38 - cannot write buffer for DAG'

In the same time on the second rig Claymore's Miner was mining without a problem. So I left that one and started to look for the problem on the first one.
After an hour of try and errors I moved to another miner (SRBminer) and there was no problem with mining.
On the second rig Claymore's Miner was still mining fine. So for the test purposes I restart this one to and it throw me the same error as on the first rig.

On both rigs I have 8GB or RAM and 64GB of swap file on SSD drive.
Claymore's Miner is started with administration rights and with:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

On both rigs SRBminer is running just fine.

You say you have 8GB of RAM which is system memory but how much GDDR do all your GPUs have? Because the DAG is growing and lately if you got any 4GB GPUs you can't mine with those anymore.

Your only solution is to put an 8GB GPU in the main PCIe 16x slot and leave 4GB in the other slots. You can also use a different OS like Ubuntu which extends the life of 4GB GPUs but its a pain initially to set up. Since undervolting and underclock is not as easy as Windows with afterburner.

Then of course the other solution is just to upgrade to all 8GB GPUs. So in 2 months when all the 4GB ASICS and GPUs stop mining the hashrate will drop and it will be very profitable with any >6GB GPUS or higher.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 22. (Read 6590718 times)