Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 352. (Read 6590718 times)

Many thanks for your help.

Bog standard no over clocking no bios mod - straight from box.

I'm wondering if it maybe the power supply - although everything is new.

Tried unplugging all but 1 gpu and it takes 70+ seconds just to get script to start to work.

same issue here- have switched to non-ssl version

Anyone else had issues with vega 8 and 11 on the Ryzen 3 2200G or Ryzen 5 2400G?

Mine says it can't build DAG file.  It does work with spectre on my A6-7400K AMD Rig.  Just trying to figure out why the new gpu's don't work with this.  I've only tried version 11.0 and up.  Any idea's would be great.

I have tried with Ethminer and it does work with that program

I have a very stable hashrate, and increase on it, but i have a bluescreen, with no errors in the claymore log

It's the program itself crashing not the gpus. Btw I have very conservative freq (both on GPUs and memory) zero memory errors on all of the cards, DCRI at 30.

Same here! Please allow an option to define devfee port.

Checked the logfile? This happened to me once I was oc and undervolt to much.

Firstly, thank you all for your help so far (messages and so on)

My rig - now 4 weeks old, ALL new kit.

Tried 11.2 today and apart from virus guards kicking off all over the place (until I disabled them all) failed to work.

I have now kind of got the rig working thanks to some help, however...

Starts at 64 Mh/s then reduces down and down...

ETH: 03/04/18-17:07:42 - SHARE FOUND - (GPU 0)
ETH: Share accepted (15 ms)!
ETH: 03/04/18-17:07:43 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 64.106 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 21.917 Mh/s, GPU1 10.142 Mh/s, GPU2 10.124 Mh/s, GPU3 21.923 Mh/s

ETH: 03/04/18-17:07:55 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 64.281 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 21.952 Mh/s, GPU1 10.191 Mh/s, GPU2 10.195 Mh/s, GPU3 21.943 Mh/s

GPU0 t=54C fan=22%%, GPU1 t=57C fan=0%%, GPU2 t=52C fan=0%%, GPU3 t=54C fan=0%%
ETH: 03/04/18-17:08:29 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 42.352 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 0.000 Mh/s, GPU1 10.197 Mh/s, GPU2 10.178 Mh/s, GPU3 21.977 Mh/s

GPU0 t=55C fan=22%%, GPU1 t=62C fan=30%%, GPU2 t=62C fan=28%%, GPU3 t=59C fan=26%%
ETH: 03/04/18-17:08:32 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 42.215 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 0.000 Mh/s, GPU1 10.132 Mh/s, GPU2 10.176 Mh/s, GPU3 21.906 Mh/s



Followed shortly by:

WATCHDOG: GPU 0 hangs in OpenCL call, exit
WATCHDOG: GPU 0 hangs in OpenCL call, exit
Quit, please wait...
Restarting OK, exit...

Then rig comes to a complete stand still...Wont go further.

Virtual memory 16gb, virus guard disabled...

Please any thoughts - this is killing me now...

Rig

Celeron - K170 board - 4gb ram - Msata HDD - 2 x rx570 4gb - 2 x RX550 4gb - Thermaltake 850psu...Windows 10 64bit.

Truth is they are a bit dusty... I will give it a try, thanks

Btw it never happened again (24h passed)

This is bad advice.  For less than half the cost you could get 31Mh/s on an rx 570, for less watts aswell

Sooo..Installed 11.2 on my Win10 64bit rig and disabled defender anti virus - worked ok for a little bit then after a few minutes of running my two 570's cards reduce in hash - 24 down to 10..to 7..and eventually 0, the two 550 remained aroun 9-11...

Im running two RX570 and two RX550 (all 4gb).

So.. Stopped the rig completely.

Put back decided to go back to the 10.6 that I found stable...

It wont go past:

AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 6:0:0)
GPU #1 recognized as Radeon RX 460/560
GPU #2: Baffin (Radeon RX 550 Series), 4096 MB available, 10 compute units (pci bus 7:0:0)
GPU #2 recognized as Radeon RX 460/560
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 470/570
POOL/SOLO version

None of the cards are clocked everything is standard from the box.

Anyone any ideas ?

I tried to download 11 - 11.1 and 11.2 again from Google - but Google wont allow it (?) says virus found used Mega instead.

Hi, guys!
Could anyone post here an example how to make API request to Claymores miner, please?
I want to get statistics on a simple HTML-page by the javascript.

I have 9 x RX 570 and 7 x RX 470
Claymore is reporting about 18 GH/s but nlpool is reporting around 15 GH/s
No many rejected shares so I don't know why there is a discrepancy.
Its early days for me and I need another 24hrs as i was dicking around with the latest AMD driver (well 18.1.1) and trying to get the [Suspicious link removed]pute part working!

Last 24hrs I earned 50 coins but i had a fair bit of downtime
WTM indicates 73 coins per day at a conservative 17 GH/s but note that WTM website difficulty is only 7.9m whereas pool indicates difficulty of 9.25m

Oh yes, its 400w extra over the 16 cards so, it is profitable where I live.

Shallowgas

i think you get around 3-5 xvg/ day for each rx 580...if you have 6 maybe not so profitable to give extra watts/card for 3-5 coins/day

Claymore v11.2
crash gpu 2  every 15 minutes
-5 and -10% mclocl does not give a good result
+voltage does not give a good result
all video cards are identical
memory (elpida) asus rx580 4gb

v11.0 stable operation 24/7

i'm the only one noticing a 20-40% drop in antmine rewards?
Have been fine until this morning, i started receive less XVG every block, while the found blocks didn't increase.
Guess going to switch to nlpool and give it a try with some rigs..

For some reason, claymore 11.2 didn’t work with my rx 480 that I have in 2 rigs. So I come back to 11.0 and now is working fine again.

But in my rig that I have only RX 580 is working nice.

Anyone having this kind of issue?

i pinged all servers.. and all of them lost all packages (except eu1)

On my Linux miners, the migration to v11.2 reduced performance. All was tuned automatically to optimise hashrate and consumption, especially the ETHI/DCRI... finally after reoptimizing, changing memfreq and intensities, it was faster and consuming less... If GPU are unstable, it may be because cards are near instability and were pushed too far with new algorithm. Review the frequencies and intensities...

Hi please try this. hope it helps.