Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 396. (Read 6590718 times)

Need some help, rig has been stable for months, then all of a sudden its gone strange.

Win10FCU(1709)/Adrenalin 17.2.1/CM11.0

Besides re-building from scratch and re-doing all BIOS mods from scratch, i'm lost.

getting random crashes, hanging GPU's. Miner restarting.


See below log extract

20:56:21:423   1be4   watchdog - thread 5 (gpu2), hb time 94
20:56:21:423   1be4   watchdog - thread 6 (gpu3), hb time 87203
20:56:21:423   1be4   WATCHDOG: GPU 3 hangs in OpenCL call, exit
20:56:21:423   1be4   watchdog - thread 7 (gpu3), hb time 87359
20:56:21:423   1be4   WATCHDOG: GPU 3 hangs in OpenCL call, exit
20:56:21:423   1be4   watchdog - thread 8 (gpu4), hb time 250
20:56:21:423   1be4   watchdog - thread 9 (gpu4), hb time 94
20:56:21:423   1be4   watchdog - thread 10 (gpu5), hb time 250
20:56:21:423   1be4   watchdog - thread 11 (gpu5), hb time 94
20:56:21:423   1be4   watchdog - thread 12 (gpu6), hb time 94
20:56:21:423   1be4   watchdog - thread 13 (gpu6), hb time 250
20:56:22:173   1be4   GPU 0 temp = 58, old fan speed = 37, new fan speed = 26

20:56:22:173   1be4   GPU 1 temp = 58, old fan speed = 52, new fan speed = 39

20:56:22:189   1be4   GPU 2 temp = 58, old fan speed = 45, new fan speed = 33

20:56:22:204   1be4   GPU 3 temp = 47, old fan speed = 0, new fan speed = 25

20:56:22:204   1be4   GPU 4 temp = 58, old fan speed = 56, new fan speed = 42

20:56:22:220   1be4   GPU 5 temp = 57, old fan speed = 41, new fan speed = 27

20:56:22:220   1be4   GPU 6 temp = 55, old fan speed = 35, new fan speed = 25

20:56:22:345   1be4   Quit, please wait...
20:56:24:783   770   GPU 0 temp = 57, old fan speed = 36, new fan speed = 25

20:56:24:783   770   GPU 1 temp = 57, old fan speed = 51, new fan speed = 37

20:56:24:798   770   GPU 2 temp = 56, old fan speed = 44, new fan speed = 31

20:56:24:798   770   GPU 3 temp = 47, old fan speed = 0, new fan speed = 25

20:56:24:814   770   GPU 4 temp = 57, old fan speed = 55, new fan speed = 40

20:56:24:830   770   GPU 5 temp = 56, old fan speed = 38, new fan speed = 25

20:56:24:830   770   GPU 6 temp = 54, old fan speed = 35, new fan speed = 25

20:56:33:284   1be4   Restarting OK, exit...


20:56:35:940   2824   Check and remove old log files...
20:56:35:940   2824   args: -ewal .MinerX -epsw x -gser 5 -mode 1 -tt 62 -cclock 1100,1075,1075,1070,1070,1070,1075 -mclock 2000,2050,2025,2025,2025,2000,2050 -cvddc 900,900,900,900,900,900,900 -mvddc 850,850,850,850,850,850,850 -ftime 10 -dcri 6 -platform 1 -logfile c:\claymore\EthereumMiner\11.0\Logs\Claymore_log.txt -logsmaxsize 100 -mport 0
20:56:35:940   2824   
20:56:35:940   2824   ษออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออป
20:56:35:940   2824   บ                Claymore's Dual GPU Miner - v11.0               บ
20:56:35:940   2824   บ              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             บ
20:56:35:940   2824   ศออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออผ
20:56:35:940   2824   
20:56:35:940   2824   b501
20:56:36:159   2824   ETH: 6 pools are specified
20:56:36:159   2824   Main Ethereum pool is eu2.ethermine.org:14444
20:56:38:378   2824   OpenCL platform: Intel(R) OpenCL
20:56:38:378   2824   OpenCL platform: AMD Accelerated Parallel Processing
20:56:38:378   2824   AMD topology bug detected, applying a workaround.
20:57:09:963   1b88   
20:57:42:779   1b88   
20:58:15:596   1b88   
20:58:48:413   1b88   
20:59:21:229   1b88   
20:59:54:046   1b88   
21:00:26:862   1b88   
21:00:59:678   1b88   
21:01:32:494   1b88   
21:02:05:312   1b88   
21:02:05:312   1b88   Miner cannot initialize for 5 minutes, need to restart miner!
21:02:05:312   1b88   ADL: Cannot find any AMD adapters
21:02:06:531   1b88   Restarting OK, exit...


After a couple of restarts, it runs fine, it can be anything from 5mins-24 hours before it happens again.

Driving me nuts.

If you get disconnected for a few seconds, that doesn't mean your profit is lost. Your profit is stored in the database.
The difficulty of Verge is going from low to very high ( From 3.x to 11.x ) this evening .... This means the difficulty has increased 4 times, and that the earnings get 4 times less during those hours. This evening it was very high and not many shares were found.

We are working on the stability around the clock, don't worry. Like i said, a few disconnects don't matter in 24 hours time. Your profits won't get hurt.
Perhaps some should consider mining XSH ( Shield ) instead of Verge.....The difficulty is much lower as far as i can see. You can mine shield by changing the c=XVG field to c=XSH.

antmine is also not very stable.

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

Issues again, disconnected and after that " B2S: Authorization failed
: [
   21,
   "Serverfull",
   null
]
Socket was closed remotely (by pool)
 B2S: Job timeout, disconnect, retry in 20 sec... "

Is there anything you can do to be stable?
Start asking for fee, we don't mind, we just need a reliable pool.

Thanks !

I am getting 2 MHs more than before in total
7 cards rig
with this 11.0 version installed

Good job Clay.

It is not possible. The CryptoNight use the core and memory both intensively.

Bump

I did read this topic before ask you this question.
And for last 24 hrs after i switch some my rigs to you pool i get 429 XVG and even if i add 135 from "orphan" i get 564 - WTM shows 620. Any explanation?

Ok, cool. that what I'm getting on your pool per day.   

Would you know why is the calculator on whattomine is off that much ?  or did I key-in wrong  ?

Around 2000 Verge a day.

I make around 330Gh/s Dual mining Verge, what are the estimated coins I should be receiving per day ?

I use whattomine to check but it show an insane amount   

anyone?

Is the Claymore Remote Monitor also for IPAD available or something like this, to overview my 4 rigs

hi guys, I have one rig with 8 x RX580 nitro+ and I am trying to use claymore 11 (the latest version) whenever I start it one of the GPUs has 0.00 Mh/s and gets also an error:

WATCHDOG: GPU 7 hangs in OpenCL call, exit
WATCHDOG: GPU 7 hangs in OpenCL call, exit
Quit, please wait...

I need to mention that on claymore 10.6 all works ok.
I am using linux as OS.

any advices?

thanks in advance

Reddit chatter saying that it will be roughly the same as building a rig, so 180MH/s for about $2500.  That's what the performance of this asic will be.

What about devfee on 3GB cards.

They crash because cant allocate DAG (too big I think)....

Anyway, there're other algos and what hashrate are this asics can hit on ddr3? They might consume less power but I don't think they'll influence the network hashrate a lot

Core Dev team will just deploy a change in the algorithm of Ethash andn those shiny new F3s won’t work anymore. They can will eth forks but not ethereum itself.

Are you forgetting the whole idea of Ethereum being “ASIC-resistant”?

Haha, and you think all that it's true? Why would someone create an miner with DDR3 memory first of all ?
A GPU has DDR5 + you need that speed.
+ let's say they will release one, even for BTC asic miner there is a preorder with like 6 months in advance, that means they build all those miner with your own money.
So... even if they create something, it wont be earlier than the end of 2018, till then, go go GPUs .
My own opinion, no ASIC Ethereum miner will be released.