Zpool registred my XVG adress as Digibyte... I set c=XVG, but still it messed up. Their support on discord is not answering so I'm fu*ked.
They fixed it. Thank you zPool once again. 
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 436. (Read 6590718 times)
February 08, 2018, 02:39:07 PM
February 08, 2018, 02:37:42 PM
Claymore: Good update as always, perhaps you should change then name of miner download from sia + decred though. Also just reminder you were going to have remote monitor be able to show totals per algorithm (like cryptonight and ethash...)
February 08, 2018, 02:29:02 PM
Mr claymore, your linux miner on both google drive and mega, is an older miner and not the 11.0 one.
It's a good idea to update all files when you migrate to new version, not just executable or a few files.
But i did update all the files, not just a few.
On the reload of the miner, its still an old miner.
It happens to all my rigs.
February 08, 2018, 02:19:54 PM
Mr claymore, your linux miner on both google drive and mega, is an older miner and not the 11.0 one.
It's a good idea to update all files when you migrate to new version, not just executable or a few files.
February 08, 2018, 02:06:33 PM
Set c=XVG on the password flag, like "-p c=XVG" and your wallet should be an XVG wallet
February 08, 2018, 02:02:43 PM
Zpool registred my XVG adress as Digibyte... I set c=XVG, but still it messed up. Their support on discord is not answering so I'm fu*ked.
February 08, 2018, 01:54:43 PM
In zpool.ca it says
"YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c= is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL. Do not use a symbol that has an added. Such as XVG-blake2s or AUR-sha or DGB-skein, these are ALL WRONG. These are used only for the pool to support multi-algo coins."
so c=XVG-blake2s seems to be wrong
what should we put?
"YOU MUST ALWAYS set your currency in your password field that matches your wallet address: c=
so c=XVG-blake2s seems to be wrong
what should we put?
c=XVG
February 08, 2018, 01:47:17 PM
Mr claymore, your linux miner on both google drive and mega, is an older miner and not the 11.0 one.
February 08, 2018, 01:33:47 PM
I just configured it to antminepool.com, and it's working great.
Using -dcri 12,13,16 with RX 480/570/580 and it gives ~87.2 MH/s on ETH and 1185 MH/s on B2S.
Power consumption increased around 30W on the wall for the whole system vs ETH solo. Much less that ETH+SIA I did before...
Great job, Claymore.
Using -dcri 12,13,16 with RX 480/570/580 and it gives ~87.2 MH/s on ETH and 1185 MH/s on B2S.
Power consumption increased around 30W on the wall for the whole system vs ETH solo. Much less that ETH+SIA I did before...
Great job, Claymore.
February 08, 2018, 01:24:56 PM
"-dpsw XVG-blake2s" on zpool is wrong
Read all the instructions on the homepage, specifically the part about c=
You want "-dpsw c=XVG"
Read all the instructions on the homepage, specifically the part about c=
You want "-dpsw c=XVG"
Hi,
I already fixed it.
But thank you anyway
Regards,
Nestade
That means c=XVG that you will receive xvg right? so if i want to receive btc it should be c=BTC ? thanks
February 08, 2018, 01:24:27 PM
is it me or the linux version isnt an updated 11.0 one ?
February 08, 2018, 01:21:23 PM
How to configure this to mine Verge on a pool with username / pass instead of wallet address on miner config?
I was mining Verge on http://xvg-mg.idcray.com with sgminer and config was something like "stratum+tcp://sg-mine.idcray.com:10061 -u username.worker -p password".
Thanks.
I was mining Verge on http://xvg-mg.idcray.com with sgminer and config was something like "stratum+tcp://sg-mine.idcray.com:10061 -u username.worker -p password".
Thanks.
Nevermind, that is a Myriad-Groestl Algo Pool. Didn't remember that.
February 08, 2018, 01:15:46 PM
Edit: nevermind, I'm a dummy
February 08, 2018, 12:58:47 PM
With the b2s dual, you guys need to be careful with your psu's they might explode. The current is definitely going up.
February 08, 2018, 12:48:30 PM
my Nvidia 1060 3Gb dont work with 178 DAG epoch on etherium-classic (even in new and in old versions)
Code:
19:42:08:799 2d8 Check and remove old log files...
19:42:08:801 2d8 args: -epool etc-eu1.nanopool.org:19999 -ewal 0x0aca6fa295ca52113f791fa977b3abd775237196/w1_1060_6x_470_1x/seazon@$$$$$.com -epsw seazon@$$$$$.com -mode 1 -ftime 10 -tt 1 -eres 0
19:42:08:801 2d8
19:42:08:803 2d8 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
19:42:08:804 2d8 є Claymore's Dual GPU Miner - v11.0 є
19:42:08:805 2d8 є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
19:42:08:806 2d8 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
19:42:08:811 2d8
19:42:08:811 2d8 b501
19:42:09:013 2d8 ETH: 5 pools are specified
19:42:09:015 2d8 Main Ethereum pool is etc-eu1.nanopool.org:19999
19:42:20:433 2d8 OpenCL platform: NVIDIA CUDA
19:42:20:435 2d8 OpenCL platform: AMD Accelerated Parallel Processing
19:42:20:438 2d8 OpenCL initializing...
19:42:20:439 2d8 AMD Cards available: 1
19:42:20:440 2d8 GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 7:0:0)
19:42:20:440 2d8 GPU #0 recognized as Radeon RX 470/570
19:42:20:441 2d8 POOL/SOLO version
19:42:20:441 2d8 Platform: Windows
19:42:20:489 2d8 start building OpenCL program for GPU 0...
19:42:20:954 2d8 done
19:42:21:191 2d8 GPU #0: algorithm ASM
19:42:21:881 2d8 CUDA initializing...
19:42:21:881 2d8 NVIDIA Cards available: 6
19:42:21:882 2d8 CUDA Driver Version/Runtime Version: 9.1/8.0
19:42:21:913 2d8 GPU #1: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 1:0:0)
19:42:21:918 2d8 GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
19:42:21:920 2d8 GPU #3: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 8:0:0)
19:42:21:923 2d8 GPU #4: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 9:0:0)
19:42:21:925 2d8 GPU #5: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 10:0:0)
19:42:21:927 2d8 GPU #6: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 11:0:0)
19:42:21:928 2d8 Total cards: 7
19:42:24:567 2d8 NVML version: 9.390.77
19:42:26:158 af4 ETH: Stratum - connecting to 'etc-eu1.nanopool.org' <164.132.108.171> port 19999
19:42:26:204 2d8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
19:42:26:206 2d8 ETH: eth-proxy stratum mode
19:42:26:207 2d8 Watchdog enabled
19:42:26:207 2d8 Remote management (READ-ONLY MODE) is enabled on port 3333
19:42:26:208 2d8
19:42:26:215 af4 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x0aca6fa295ca52113f791fa977b3abd775237196/w1_1060_6x_470_1x/seazon@$$$$$.com", "seazon@$$$$$.com"], "id": 2, "method": "eth_submitLogin"}
19:42:26:215 af4 ETH: Stratum - Connected (etc-eu1.nanopool.org:19999)
19:42:26:269 af4 got 282 bytes
19:42:26:269 af4 buf: {"jsonrpc":"2.0","id":2,"result":true}
{"jsonrpc":"2.0","id":0,"result":["0xd895cb4685de04c32aba110c4e3877555a5c0ec16edd2ca0cfa5889e06e3c0b2","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:26:269 af4 parse packet: 38
19:42:26:270 af4 ETH: Authorized
19:42:26:271 af4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:42:26:271 af4 remove first packet 243
19:42:26:271 af4 new buf size: 243
19:42:26:271 af4 parse packet: 242
19:42:26:271 af4 ETH: job changed
19:42:26:271 af4 new buf size: 0
19:42:26:310 15d0 Setting DAG epoch #178...
19:42:26:320 af4 got 243 bytes
19:42:26:320 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd895cb4685de04c32aba110c4e3877555a5c0ec16edd2ca0cfa5889e06e3c0b2","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:26:321 af4 parse packet: 242
19:42:26:321 af4 ETH: job is the same
19:42:26:321 af4 new buf size: 0
19:42:29:491 af4 got 243 bytes
19:42:29:491 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd5fe48fb688550bae93cdce2adcbad3cce927f5934ac7179a47effd1e9bf7e47","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:29:491 af4 parse packet: 242
19:42:29:492 af4 ETH: job changed
19:42:29:492 af4 new buf size: 0
19:42:29:492 af4 ETH: 02/08/18-19:42:29 - New job from etc-eu1.nanopool.org:19999
19:42:29:492 af4 target: 0x000000006df37f67 (diff: 10000MH), epoch 178(2.39GB)
19:42:29:493 af4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
19:42:29:494 af4 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s
19:42:29:820 15d0 Setting DAG epoch #178 for GPU0
19:42:29:821 19b4 Setting DAG epoch #178 for GPU1
19:42:29:822 5a0 Setting DAG epoch #178 for GPU4
19:42:29:823 1b2c Setting DAG epoch #178 for GPU2
19:42:29:822 bf4 Setting DAG epoch #178 for GPU6
19:42:29:824 1614 Setting DAG epoch #178 for GPU3
19:42:29:824 19b4 Create GPU buffer for GPU1
19:42:29:825 12d8 Setting DAG epoch #178 for GPU5
19:42:29:825 5a0 Create GPU buffer for GPU4
19:42:29:827 bf4 Create GPU buffer for GPU6
19:42:29:826 1b2c Create GPU buffer for GPU2
19:42:29:828 12d8 Create GPU buffer for GPU5
19:42:29:827 1614 Create GPU buffer for GPU3
19:42:29:826 15d0 Create GPU buffer for GPU0
19:42:30:117 1614 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
19:42:30:208 5a0 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
19:42:33:120 1614 Set global fail flag, failed GPU3
19:42:33:120 1614 GPU 3 failed
19:42:33:122 540 Setting DAG epoch #178 for GPU3
19:42:33:124 540 GPU 3, CUDA error 11 - cannot write buffer for DAG
19:42:33:210 5a0 Set global fail flag, failed GPU4
19:42:33:210 5a0 GPU 4 failed
19:42:33:213 f0c Setting DAG epoch #178 for GPU4
19:42:33:214 f0c GPU 4, CUDA error 11 - cannot write buffer for DAG
19:42:35:713 15d0 GPU0 DAG creation time - 5644 ms
19:42:35:714 15d0 Setting DAG epoch #178 for GPU0 done
19:42:36:126 540 Set global fail flag, failed GPU3
19:42:36:126 540 GPU 3 failed
19:42:36:216 f0c Set global fail flag, failed GPU4
19:42:36:216 f0c GPU 4 failed
19:42:36:277 af4 ETH: checking pool connection...
19:42:36:552 af4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:42:36:600 af4 got 243 bytes
19:42:36:600 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd5fe48fb688550bae93cdce2adcbad3cce927f5934ac7179a47effd1e9bf7e47","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:36:600 af4 parse packet: 242
19:42:36:601 af4 ETH: job is the same
19:42:36:601 af4 new buf size: 0
19:42:39:084 19ac GPU0 t=30C fan=27%; GPU1 t=40C fan=20%, GPU2 t=38C fan=20%, GPU3 t=33C fan=20%, GPU4 t=33C fan=20%, GPU5 t=37C fan=20%, GPU6 t=41C fan=20%
19:42:39:199 18bc em hbt: 0, fm hbt: 0,
19:42:39:199 18bc watchdog - thread 0 (gpu0), hb time 297
19:42:39:199 18bc watchdog - thread 1 (gpu0), hb time 141
19:42:39:199 18bc watchdog - thread 2 (gpu1), hb time 3500
19:42:39:200 18bc watchdog - thread 3 (gpu1), hb time 3500
19:42:39:200 18bc watchdog - thread 4 (gpu2), hb time 3500
19:42:39:200 18bc watchdog - thread 5 (gpu2), hb time 3500
19:42:39:200 18bc watchdog - thread 6 (gpu3), hb time 3500
19:42:39:201 18bc watchdog - thread 7 (gpu3), hb time 3500
19:42:39:201 18bc watchdog - thread 8 (gpu4), hb time 3500
19:42:39:201 18bc watchdog - thread 9 (gpu4), hb time 3500
19:42:39:201 18bc watchdog - thread 10 (gpu5), hb time 3500
19:42:39:201 18bc watchdog - thread 11 (gpu5), hb time 3500
19:42:39:202 18bc watchdog - thread 12 (gpu6), hb time 3500
19:42:39:202 18bc watchdog - thread 13 (gpu6), hb time 3500
19:42:39:202 18bc WATCHDOG: GPU error, you need to restart miner :(
19:42:39:314 18bc Quit, please wait...
19:42:39:914 bf4 GPU6 DAG creation time - 9771 ms
19:42:39:915 bf4 Setting DAG epoch #178 for GPU6 done
19:42:39:949 12d8 GPU5 DAG creation time - 9806 ms
19:42:40:025 12d8 Setting DAG epoch #178 for GPU5 done
19:42:40:092 1b2c GPU2 DAG creation time - 9735 ms
19:42:40:093 1b2c Setting DAG epoch #178 for GPU2 done
19:42:41:098 19b4 GPU1 DAG creation time - 10997 ms
19:42:41:100 19b4 Setting DAG epoch #178 for GPU1 done
19:42:42:527 18bc Restarting OK, exit...
19:42:08:801 2d8 args: -epool etc-eu1.nanopool.org:19999 -ewal 0x0aca6fa295ca52113f791fa977b3abd775237196/w1_1060_6x_470_1x/seazon@$$$$$.com -epsw seazon@$$$$$.com -mode 1 -ftime 10 -tt 1 -eres 0
19:42:08:801 2d8
19:42:08:803 2d8 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
19:42:08:804 2d8 є Claymore's Dual GPU Miner - v11.0 є
19:42:08:805 2d8 є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
19:42:08:806 2d8 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
19:42:08:811 2d8
19:42:08:811 2d8 b501
19:42:09:013 2d8 ETH: 5 pools are specified
19:42:09:015 2d8 Main Ethereum pool is etc-eu1.nanopool.org:19999
19:42:20:433 2d8 OpenCL platform: NVIDIA CUDA
19:42:20:435 2d8 OpenCL platform: AMD Accelerated Parallel Processing
19:42:20:438 2d8 OpenCL initializing...
19:42:20:439 2d8 AMD Cards available: 1
19:42:20:440 2d8 GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 7:0:0)
19:42:20:440 2d8 GPU #0 recognized as Radeon RX 470/570
19:42:20:441 2d8 POOL/SOLO version
19:42:20:441 2d8 Platform: Windows
19:42:20:489 2d8 start building OpenCL program for GPU 0...
19:42:20:954 2d8 done
19:42:21:191 2d8 GPU #0: algorithm ASM
19:42:21:881 2d8 CUDA initializing...
19:42:21:881 2d8 NVIDIA Cards available: 6
19:42:21:882 2d8 CUDA Driver Version/Runtime Version: 9.1/8.0
19:42:21:913 2d8 GPU #1: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 1:0:0)
19:42:21:918 2d8 GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
19:42:21:920 2d8 GPU #3: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 8:0:0)
19:42:21:923 2d8 GPU #4: GeForce GTX 1060 3GB, 3072 MB available, 9 compute units, capability: 6.1 (pci bus 9:0:0)
19:42:21:925 2d8 GPU #5: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 10:0:0)
19:42:21:927 2d8 GPU #6: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1 (pci bus 11:0:0)
19:42:21:928 2d8 Total cards: 7
19:42:24:567 2d8 NVML version: 9.390.77
19:42:26:158 af4 ETH: Stratum - connecting to 'etc-eu1.nanopool.org' <164.132.108.171> port 19999
19:42:26:204 2d8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
19:42:26:206 2d8 ETH: eth-proxy stratum mode
19:42:26:207 2d8 Watchdog enabled
19:42:26:207 2d8 Remote management (READ-ONLY MODE) is enabled on port 3333
19:42:26:208 2d8
19:42:26:215 af4 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x0aca6fa295ca52113f791fa977b3abd775237196/w1_1060_6x_470_1x/seazon@$$$$$.com", "seazon@$$$$$.com"], "id": 2, "method": "eth_submitLogin"}
19:42:26:215 af4 ETH: Stratum - Connected (etc-eu1.nanopool.org:19999)
19:42:26:269 af4 got 282 bytes
19:42:26:269 af4 buf: {"jsonrpc":"2.0","id":2,"result":true}
{"jsonrpc":"2.0","id":0,"result":["0xd895cb4685de04c32aba110c4e3877555a5c0ec16edd2ca0cfa5889e06e3c0b2","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:26:269 af4 parse packet: 38
19:42:26:270 af4 ETH: Authorized
19:42:26:271 af4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:42:26:271 af4 remove first packet 243
19:42:26:271 af4 new buf size: 243
19:42:26:271 af4 parse packet: 242
19:42:26:271 af4 ETH: job changed
19:42:26:271 af4 new buf size: 0
19:42:26:310 15d0 Setting DAG epoch #178...
19:42:26:320 af4 got 243 bytes
19:42:26:320 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd895cb4685de04c32aba110c4e3877555a5c0ec16edd2ca0cfa5889e06e3c0b2","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:26:321 af4 parse packet: 242
19:42:26:321 af4 ETH: job is the same
19:42:26:321 af4 new buf size: 0
19:42:29:491 af4 got 243 bytes
19:42:29:491 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd5fe48fb688550bae93cdce2adcbad3cce927f5934ac7179a47effd1e9bf7e47","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:29:491 af4 parse packet: 242
19:42:29:492 af4 ETH: job changed
19:42:29:492 af4 new buf size: 0
19:42:29:492 af4 ETH: 02/08/18-19:42:29 - New job from etc-eu1.nanopool.org:19999
19:42:29:492 af4 target: 0x000000006df37f67 (diff: 10000MH), epoch 178(2.39GB)
19:42:29:493 af4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
19:42:29:494 af4 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s
19:42:29:820 15d0 Setting DAG epoch #178 for GPU0
19:42:29:821 19b4 Setting DAG epoch #178 for GPU1
19:42:29:822 5a0 Setting DAG epoch #178 for GPU4
19:42:29:823 1b2c Setting DAG epoch #178 for GPU2
19:42:29:822 bf4 Setting DAG epoch #178 for GPU6
19:42:29:824 1614 Setting DAG epoch #178 for GPU3
19:42:29:824 19b4 Create GPU buffer for GPU1
19:42:29:825 12d8 Setting DAG epoch #178 for GPU5
19:42:29:825 5a0 Create GPU buffer for GPU4
19:42:29:827 bf4 Create GPU buffer for GPU6
19:42:29:826 1b2c Create GPU buffer for GPU2
19:42:29:828 12d8 Create GPU buffer for GPU5
19:42:29:827 1614 Create GPU buffer for GPU3
19:42:29:826 15d0 Create GPU buffer for GPU0
19:42:30:117 1614 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
19:42:30:208 5a0 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
19:42:33:120 1614 Set global fail flag, failed GPU3
19:42:33:120 1614 GPU 3 failed
19:42:33:122 540 Setting DAG epoch #178 for GPU3
19:42:33:124 540 GPU 3, CUDA error 11 - cannot write buffer for DAG
19:42:33:210 5a0 Set global fail flag, failed GPU4
19:42:33:210 5a0 GPU 4 failed
19:42:33:213 f0c Setting DAG epoch #178 for GPU4
19:42:33:214 f0c GPU 4, CUDA error 11 - cannot write buffer for DAG
19:42:35:713 15d0 GPU0 DAG creation time - 5644 ms
19:42:35:714 15d0 Setting DAG epoch #178 for GPU0 done
19:42:36:126 540 Set global fail flag, failed GPU3
19:42:36:126 540 GPU 3 failed
19:42:36:216 f0c Set global fail flag, failed GPU4
19:42:36:216 f0c GPU 4 failed
19:42:36:277 af4 ETH: checking pool connection...
19:42:36:552 af4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:42:36:600 af4 got 243 bytes
19:42:36:600 af4 buf: {"jsonrpc":"2.0","id":0,"result":["0xd5fe48fb688550bae93cdce2adcbad3cce927f5934ac7179a47effd1e9bf7e47","0x40910b6ac043b9a4c8a3a5100b00efcc1d90c39643cc754f24bf544c3e29c01c","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
19:42:36:600 af4 parse packet: 242
19:42:36:601 af4 ETH: job is the same
19:42:36:601 af4 new buf size: 0
19:42:39:084 19ac GPU0 t=30C fan=27%; GPU1 t=40C fan=20%, GPU2 t=38C fan=20%, GPU3 t=33C fan=20%, GPU4 t=33C fan=20%, GPU5 t=37C fan=20%, GPU6 t=41C fan=20%
19:42:39:199 18bc em hbt: 0, fm hbt: 0,
19:42:39:199 18bc watchdog - thread 0 (gpu0), hb time 297
19:42:39:199 18bc watchdog - thread 1 (gpu0), hb time 141
19:42:39:199 18bc watchdog - thread 2 (gpu1), hb time 3500
19:42:39:200 18bc watchdog - thread 3 (gpu1), hb time 3500
19:42:39:200 18bc watchdog - thread 4 (gpu2), hb time 3500
19:42:39:200 18bc watchdog - thread 5 (gpu2), hb time 3500
19:42:39:200 18bc watchdog - thread 6 (gpu3), hb time 3500
19:42:39:201 18bc watchdog - thread 7 (gpu3), hb time 3500
19:42:39:201 18bc watchdog - thread 8 (gpu4), hb time 3500
19:42:39:201 18bc watchdog - thread 9 (gpu4), hb time 3500
19:42:39:201 18bc watchdog - thread 10 (gpu5), hb time 3500
19:42:39:201 18bc watchdog - thread 11 (gpu5), hb time 3500
19:42:39:202 18bc watchdog - thread 12 (gpu6), hb time 3500
19:42:39:202 18bc watchdog - thread 13 (gpu6), hb time 3500
19:42:39:202 18bc WATCHDOG: GPU error, you need to restart miner :(
19:42:39:314 18bc Quit, please wait...
19:42:39:914 bf4 GPU6 DAG creation time - 9771 ms
19:42:39:915 bf4 Setting DAG epoch #178 for GPU6 done
19:42:39:949 12d8 GPU5 DAG creation time - 9806 ms
19:42:40:025 12d8 Setting DAG epoch #178 for GPU5 done
19:42:40:092 1b2c GPU2 DAG creation time - 9735 ms
19:42:40:093 1b2c Setting DAG epoch #178 for GPU2 done
19:42:41:098 19b4 GPU1 DAG creation time - 10997 ms
19:42:41:100 19b4 Setting DAG epoch #178 for GPU1 done
19:42:42:527 18bc Restarting OK, exit...
February 08, 2018, 12:47:11 PM
BLAKE2S:
-dcri 50 with no drop on ETH
RX 470 = 1300MH/s
RX 480 = 1450MH/s
So it should be possible to mine Verge in Dual Mode with Blake2s (there are 3 pools for it) without any drop in eth-mining, correct?
Does the dual mode heat up the cards more or stress them much, so the cards can break down at some point earlier? :-)
someone cn post bat file?
ETH: ethermine.org
Verge (Blake2s): http://www.zpool.ca/
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal DA6WxpocTc583n9Xbr3GR5ByAZoTBCmepE -dcoin blake2s -dpsw c=XVG-blake2s -dcri 50
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal DA6WxpocTc583n9Xbr3GR5ByAZoTBCmepE -dcoin blake2s -dpsw c=XVG-blake2s -dcri 50
Edit: Fixed the error.
I've seen a good amount of reports on bitcointalk that zpool steals 15-20% of payout due to their exchange rates/fees, which they apply regardless of whether you exchange. Unfortunately zpool completely dominates the total network hashrate for XVG blake2s for pools. Does anyone have any recommendations on other blake2s pools for verge?
February 08, 2018, 12:43:19 PM
How to configure this to mine Verge on a pool with username / pass instead of wallet address on miner config?
I was mining Verge on http://xvg-mg.idcray.com with sgminer and config was something like "stratum+tcp://sg-mine.idcray.com:10061 -u username.worker -p password".
Thanks.
I was mining Verge on http://xvg-mg.idcray.com with sgminer and config was something like "stratum+tcp://sg-mine.idcray.com:10061 -u username.worker -p password".
Thanks.
February 08, 2018, 12:40:00 PM
"-dpsw XVG-blake2s" on zpool is wrong
Read all the instructions on the homepage, specifically the part about c=
You want "-dpsw c=XVG"
Read all the instructions on the homepage, specifically the part about c=
You want "-dpsw c=XVG"
February 08, 2018, 12:37:47 PM
Right... so how to I enable compute mode in the driver when I haven't got AMD Settings installed?... 
When i install the drivers, AMD application is there..
https://i.imgur.com/jMuPlF7.png
It's in Radeo Settings, Global settings, then "Compute" instead of "Graphic".
February 08, 2018, 12:30:15 PM
BLAKE2S:
-dcri 50 with no drop on ETH
RX 470 = 1300MH/s
RX 480 = 1450MH/s
So it should be possible to mine Verge in Dual Mode with Blake2s (there are 3 pools for it) without any drop in eth-mining, correct?
Does the dual mode heat up the cards more or stress them much, so the cards can break down at some point earlier? :-)
someone cn post bat file?
ETH: ethermine.org
Verge (Blake2s): http://www.zpool.ca/
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw XVG-blake2s -dcri 50
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw XVG-blake2s -dcri 50
One question man, is that a xvg wallet? ive trying to understand the policy of zpool
Jump to: