Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 446. (Read 6590718 times)

WHAT I SHUT DOWNLOAD THE SOFTWARE FOR WINDOW 7
 

Thanks my friends.
I know what I need to buy to resolve that restart thing.
Only I live in shit country where customs agency put what ever they feel to need to calculate customs fee, so order over Amazon or other e-shop is not a option.
I was see on you tube it have several options and I will find a way to resolve and buy them.
Also one more major task is to put my rigs in box with filters.
Now watching videos for next generation of rigs with Water cooling, but first must to take out some cash.

You could also buy a thingy like the smos guy who sells the simple rig resetter.  im sure there are other variations, but it just shorts your power pins remotelly.

you could restart it with this:

SainSmart Web TCP/IP 10A Relay Remote Control Kit

I use that without problems!

Finally to I also contribute.
Claymore, thanks for this excellent treed and all members.
After my first month of mining, results are amazing.
No.1 rig - 6 GPU RX580-8 g
MB Gigabyte H110-D3a - Bios upgraded
No.2 rig - 5 GPU RX480-4 g
MB Asus Prime Z270 - Bios upgraded

On bouth
Ram 4 Gig
Win 10
After burner 440 beta 16
Claymore 10.2
Rig 1 - Drivers from August 2017
Rig 2 - Drivers RobinHood

Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s
Rig 2 - ETH 149 MH/s , PASC 1490 MH/s
dcri 10
Temp 48-55 C
Fun 80-90%
Undervolted
Still need to see my electric bill

Had a few problems, but after downclocking all its smooth.
Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.

Keep up good work Claymore

root / utils / wolfamdctrl

For each card you can turn the fan speed @ 100% or stop it.

The motherboard starts the numbering from the big pcie and moving opposite the cpu the same color ( black )

What is your setup in Claymore start.bat? Your GPUs?

Probably use the same config for the 3 GPUs is hanging.

No, but I do find your stats interesting in the following way ... I've tuned my 580 to give me an average DAG creation time of 4200ms, and my hash rate is ~ 30.7MH.  If I detune my cards, my DAG creation takes longer and my hash rate goes down.  In other words, they move in sync with the assumption being that a higher memory bandwidth from tuning gives me faster DAG creation and a high hash rate.

Your DAG creation is at about 6500ms, yet your hash rate is is exceptionally high.  Are you running 580's as well?

Just a curiosity.

I have a stable System with 13 cards

13 GPUs
370 MHs
GPU: 1100,1100,1150,1150,1250,1250,1150,1250,1150,1150,1150,1150,1100
Memory: 1900,1900,2000,2000,2150,2150,2000,2150,2000,2000,2000,2000,1900
Stage: 1
Undervolting: 880
1900 Watt

anyone having problems running 12 gpus? only gpu # 0 runs at max hashrate while the other 11 cards run at 80% of the max hash rates. after running for a few hours sometimes they all run at max hashrate and sometimes not. sometimes when i close claymore then run it again, all 12 cards get max hash rate, but sometimes. relaunching claymore just crashes the system and reboots it.

All mentions - purely arbitrary, purely theoretical calculations.
Solo mining:
Claymore takes 1%, you are left with 99% ETH PoW time (effort)
Ethermine pool takes 1% of your 99% ETH effort
Ideally, you should be left with 98%
Dual mining:
Claymore takes 2%, 98% left, can be truncated to 95% (dual gives more incorrect and stale shares)
Ethermine takes 1% of your 95%
You are left with ~94%
Siamining takes 3% of your Sia effort, Claymore takes none

PS:
1. Siacoin is not anymore viable for GPU mining (difficulty and net hashrate skyrocketed).
2. Luck factor makes the effective hashrate fluctuate 10-15% up and down.
3. For AMD RX, optimal dcri values can boost the ETH hashrate by 2-3%. However, incorrect share ratio tends to be about 1-2%, so it levels out.

This is your problem. Too high dual mining intensity crashes the GPUs.

The higher ETH mining intensity, the more consistent effective hashrate you'll get. If your rig reboots that often, maybe your cards are underpowered?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal MYKEY.MYPC/MYEMAIL -epsw x -mode 1 -ftime 10 -wd 0 -ethi 7 -r 20

I use this but the miner just kills itself after everything between 5-60 minutes. I have tried this too, it seems to be a little bit more stable but still closing:
epsw x -mode 1 -ftime 10 -ethi 4 -wd 0 -r 40

I have uninstalled Malwarebytes antimalware, added exceptions to windows defender and set it inactive, made exceptions to Webroot security without results.
I have a GTX 970 black edition to start with. Computing mode, no difference when overclocked or standard clocked. My solution for the moment is to reboot the computer every 40 minutes and set it to autostart. Not very good but it will mine.

Any other ideas? I went from version 10.0 to 10.6 too without any better results.

Last lines in log 1
15:27:30:647   4044   parse packet: 38
15:27:30:648   4044   ETH: Authorized
15:27:30:649   4044   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

15:27:30:649   4044   remove first packet 243
15:27:30:650   4044   new buf size: 243
15:27:30:651   4044   parse packet: 242
15:27:30:652   4044   ETH: job changed
15:27:30:652   4044   new buf size: 0
15:27:30:698   4044   got 243 bytes
15:27:30:698   4044   buf: {"jsonrpc":"2.0","id":0,"result":["0x02abe34e119e825aa5230bb07216d337236d3cabdf042ebf57e573161e516d9b","0xb683d2a971567602a1931b76b9fb447dd5563f0e4ab5dd69250556e7c1c94783","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

15:27:30:699   4044   parse packet: 242
15:27:30:700   4044   ETH: job is the same
15:27:30:700   4044   new buf size: 0
15:27:30:720   21bc   Setting DAG epoch #167...
15:27:32:380   21bc   Setting DAG epoch #167 for GPU0
15:27:32:383   21bc   Create GPU buffer for GPU0


Last lines in log 2
15:27:12:034   3f84   parse packet: 242
15:27:12:035   3f84   ETH: job changed
15:27:12:035   3f84   new buf size: 0
15:27:12:036   3f84   ETH: 02/01/18-15:27:12 - New job from eth-eu1.nanopool.org:9999
15:27:12:037   3f84   target: 0x000000006df37f67 (diff: 10000MH), epoch 167(2.30GB)
15:27:12:127   3f84   ETH - Total Speed: 10.052 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:04
15:27:12:297   3f84   ETH: GPU0 10.052 Mh/s
15:27:15:601   2fa0   em hbt: 0, fm hbt: 16,
15:27:15:603   2fa0   watchdog - thread 0 (gpu0), hb time 250
15:27:15:604   2fa0   watchdog - thread 1 (gpu0), hb time 78

The memory speed will not change in Afterburner, it stays pretty low on 3004MHz.
https://imgur.com/hnsi0RO

Same here. i had this error in the morning too. Switched back to an old version.

I thought this problem with claymore's eth miner and ethermine.org was solved but again today (( eu server

constant dag regeneration ((
Anyone with the same problem?

Hey guys, sometimes one of my rigs just stops working.

The mining cmd window is there, but doesn't run further.

Windows and Remote Tool are fine and running, so I can restart easily, but what's the issue here?

I would like crashes, then my pc auto reboots (reboot.bat -r 1 option) --> When this cmd freeze happens, im not mining and not restarting, that sucks :-/

thanks, first i change all riser, but ....

ok next i try my ga-990fxa board.

What's the issue you ran into with Nanopool?  Thanks for the posting.

CJ

Music for my ears

You are so funny