Regarding the issues I had updating my AMD drivers, where my Claymore miner would freeze while building OpenCL:
I performed a clean install of Windows and everything worked great with latest drivers 17.11.1 . It was the 1st time that my miner run without a single crash for 24h straight. Then out of the sudden, my rig restarted (I think it restarted because of windows updates) and the same freeze problem reappeared! I let my rig cool down just to be sure that it is not a hardware issue, I tested it again and the problem remained.
I once again performed a clean install of Windows and now once again everything is fine with latest drivers 17.11.1. I did my best to block Windows from updating again.
When I have more info, I will let you know, in case some other poor fellow has the same issues I had.
My rig:
ASUZ Prime Z270-P
8x RX 580 8GB Nitro+ (Hynix)
Windows 10 Pro
Radeon™ Software Crimson ReLive Edition 17.11.1
Claymore Dual Miner v.10.1
Modded BIOS
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 546. (Read 6590757 times)
November 03, 2017, 08:53:32 PM
November 03, 2017, 08:00:41 PM
anyone have a good way on windows 10 to restart the miner if after the reboot.bat script runs ?
There is a good description on how to get any programme to startup with windows, including Claymore, at link below. This is how I get Claymore to re-start if Windows crashes.
https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/
November 03, 2017, 06:55:48 PM
anyone have a good way on windows 10 to restart the miner if after the reboot.bat script runs ?
I followed this guy's instructions - works great.
https://www.youtube.com/watch?v=SUvQ0UH-sV0&t=850s
November 03, 2017, 06:54:55 PM
Hello guys, thanks Claymore for the miner, but i have one question, Is now this miner work with both suprnova pools , because i am mining eth there ?
PS. I read all 10 pages, nothing about eth suprnova, so i suppose that not work ?
PS. I read all 10 pages, nothing about eth suprnova, so i suppose that not work ?
Yes, it does work with suprnova pools.
November 03, 2017, 06:40:26 PM
I have one rig showing 850mh/s on lbry
290x win10 17.7 drivers
Other rigs running 8.1 or 7 show 85mh/s
290x win 7 16.9 drivers
Is it the drivers or the os? Is the high hashrate not indicating correct?
290x win10 17.7 drivers
Other rigs running 8.1 or 7 show 85mh/s
290x win 7 16.9 drivers
Is it the drivers or the os? Is the high hashrate not indicating correct?
November 03, 2017, 03:11:38 PM
anyone have a good way on windows 10 to restart the miner if after the reboot.bat script runs ?
November 03, 2017, 02:20:35 PM
Hello! Claymore do you have a youTube channel? Or do you have recommendations?
November 03, 2017, 02:07:45 PM
You guys had any problems mining on Dwarfpool with claymore?? i set up my .bat file on my miners (Nvidia gpu's) i see the miners and hash rates on dwarfpool web, but i see no personal shares nor graphs about the miners i left it 1 hour , everything works fine in claymore console , but on the web i see no profit no shares just my miners and hashrates. anyone know what might be wrong? i use 10.1 claymore and {EthDcrMiner64.exe -epool eth-us.dwarfpool.com:8008 -ewal 0xf4563559911922b5b1c43f587abcbd336b8c4afc/mineiac1 -epsw x -mode 1 -ftime 10 -r 1}
Thanks
Thanks
November 03, 2017, 12:53:39 PM
94W in GPU-Z is quite good for dual mining (I have 96W for one 580 and 100W for another). ETH only should be below 80W. I run my cards at 825-875mV (both memory and core).
GPU-Z reports core consumption only, total wattage will be more (card memory, fans), about 140w at the wall (depending on power supply efficiency).
GPU-Z reports core consumption only, total wattage will be more (card memory, fans), about 140w at the wall (depending on power supply efficiency).
unfortunately 94w eth only.
I'll try to do via claymore ... I was trying to overdriventool but without success.
November 03, 2017, 12:47:44 PM
I'm using the AMD blockchain drivers with Afterburner on Windows 10 Pro v1703 and it works fine. If you updated to the Windows 10 Fall Creators Update (v1709), that may be your problem as the blockchain drivers don't support the FCU.
have you verified your actual power consumption with killawatt or gpuz?
which ab version are you using? and is it the aug 23rd driver?
i haven't updated it all. i just installed windows and disabled updates completely.
November 03, 2017, 12:29:01 PM
Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.
what is the average consumption in the 580? The best I can get is 94w checked in gpuz.
I'll try to undervolt via claymore.
94W in GPU-Z is quite good for dual mining (I have 96W for one 580 and 100W for another). ETH only should be below 80W. I run my cards at 825-875mV (both memory and core).
GPU-Z reports core consumption only, total wattage will be more (card memory, fans), about 140w at the wall (depending on power supply efficiency).
November 03, 2017, 12:14:01 PM
Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.
what is the average consumption in the 580? The best I can get is 94w checked in gpuz.
I'll try to undervolt via claymore.
November 03, 2017, 11:40:48 AM
https://s1.postimg.org/6b7wma5m73/IMG_20171102_211839_-_Copy.jpg
I've been trying for a few hours and none of the undervolting options work. Overdriventool doesn't work. Wattman doesn't work. Afterburner beta 21/previous versions doesn't work. I've tried the Aug 23rd blockchain drivers and the latest 17.10.3 drivers.
Anyone *actually* got undervolting working on Windows 10?
My 580s now hash at a pathetic 21MH when it was previously hashing at 30MH. Power consumption with the old drivers is 650w vs 1000w+ on the DAG fix drivers.
I've been trying for a few hours and none of the undervolting options work. Overdriventool doesn't work. Wattman doesn't work. Afterburner beta 21/previous versions doesn't work. I've tried the Aug 23rd blockchain drivers and the latest 17.10.3 drivers.
Anyone *actually* got undervolting working on Windows 10?
My 580s now hash at a pathetic 21MH when it was previously hashing at 30MH. Power consumption with the old drivers is 650w vs 1000w+ on the DAG fix drivers.
Try undervolting directly in Claymore.
Also, what finally worked for me is setting memory voltage equal to (or lower than) core voltage. When memory voltage was higher, core undervolt simply didn't work or stick.
November 03, 2017, 11:02:28 AM
Need help with direct mining of Nicehash pool(s) using Claymore Dual independently.
I downloaded Claymore Dual and wrote a .bat file that would connect my miner to the Nicehash Eth pool and the Nicehash Lbry pool. To be perfectly clear, I am NOT USING Nicehash Legacy miner nor am I using Nicehash 2.x miner. I am using Claymore's miner as a stand alone and pointing my rig at the Nicehash pools.
Here is my command line:
Please note my btc wallet address is a Nicehash btc wallet.
Problem: When I run this and the command window pops up, it shows the second pool as being a decred pool, and, the hashrate indicates a decred hashrate, not an Lbry hashrate. What gives? I didn't run it long enough to see if shares were actually generated because I'm not interested in decred, and I'm pretty sure it's NOT mining Lbry, based on what I see. This happens on both of my rigs.
Any help would be appreciated!
Thanks
your missing -dcoin lbc without the -dcoin command the miner will default to dcr as a second coinI downloaded Claymore Dual and wrote a .bat file that would connect my miner to the Nicehash Eth pool and the Nicehash Lbry pool. To be perfectly clear, I am NOT USING Nicehash Legacy miner nor am I using Nicehash 2.x miner. I am using Claymore's miner as a stand alone and pointing my rig at the Nicehash pools.
Here is my command line:
Code:
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal my btc wallet address -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://lbry.usa.nicehash.com:3356 -dwal my btc wallet address
Please note my btc wallet address is a Nicehash btc wallet.
Problem: When I run this and the command window pops up, it shows the second pool as being a decred pool, and, the hashrate indicates a decred hashrate, not an Lbry hashrate. What gives? I didn't run it long enough to see if shares were actually generated because I'm not interested in decred, and I'm pretty sure it's NOT mining Lbry, based on what I see. This happens on both of my rigs.
Any help would be appreciated!
Thanks
Thank you. That fixed it.
November 03, 2017, 07:27:34 AM
hi every boody
now i get a new motherboard biostar b250btc and installed 5 rx 580 + 1 rx 570 but the problem when i install win 10 fcu + 17.10.3 then msi afterbuner any edition there is no option is enabled in afterburner i tried last editin 4.4 but same results
i tried many options but in vain and in order to use afterburner i used amd blockchain driver and the core voltage control is not enabled even when you enable it from the settings and the gpus is over heated
please advise me
now i get a new motherboard biostar b250btc and installed 5 rx 580 + 1 rx 570 but the problem when i install win 10 fcu + 17.10.3 then msi afterbuner any edition there is no option is enabled in afterburner i tried last editin 4.4 but same results
i tried many options but in vain and in order to use afterburner i used amd blockchain driver and the core voltage control is not enabled even when you enable it from the settings and the gpus is over heated
please advise me
now i noticed that in msi afterburner window ( Driver version ) is blank as if it was gpus not identified but in device manger it is defined
any help ? cpu used is celeron g3930
on the other rig motherboard gigabyte z170 + core i5-6500 is used and same software the only problem that core voltage is not activated in afterburner
November 03, 2017, 07:06:51 AM
Afterburner v4.4.0 final is still not working with the Crimson Relive 17.11.1 drivers on Windows 10 Pro v1703. Everything is grayed out. Back to the blockchain drivers again.
https://www.guru3d.com/files-details/msi-afterburner-beta-download.html
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
https://www.guru3d.com/files-details/msi-afterburner-beta-download.html
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
November 03, 2017, 04:49:02 AM
Anyone tried new AMD 17.11. driver?
works ok, to me
Works for me as well, so far no freezes (I would have had a freeze by now with 17.10.2 and Win10 FCU).
November 03, 2017, 04:02:44 AM
Anyone tried new AMD 17.11. driver?
works ok, to me
November 03, 2017, 01:01:20 AM
Anyone tried new AMD 17.11. driver?
November 02, 2017, 11:05:40 PM
not change hs with 10.0 version
Jump to: