ethman don't work with 9.8 version
help me
help me
It does work for me.
What is your bat/config file?
What is the error message?
Screenshots will be helpful...
with 9.7 i see all
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 645. (Read 6590565 times)
August 24, 2017, 09:21:29 PM
It does work for me.
What is your bat/config file?
What is the error message?
Screenshots will be helpful...
with 9.7 i see all
August 24, 2017, 09:18:58 PM
ethman don't work with 9.8 version
help me
help me
It does work for me.
What is your bat/config file?
What is the error message?
Screenshots will be helpful...
August 24, 2017, 08:38:29 PM
ethman with 9.8 don't work with 9.7 work
who can help me??
thanks
who can help me??
thanks
August 24, 2017, 08:23:24 PM
I just have a question about the miner.
I've being mining over like 7 months now.
With 6x Rx580 Sapphire 8 GB.
All my cards were giving me 29,9 stable.
And now one of my cards drops to 9 / 8 / 10 / 11 mh/s out of nowhere.
Is the card brikked or is the configuration wrong ?
This is the start-up line I use when I am mining.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal WALLETNAME.Setup01-Miner/EMAIL -epsw x -mode 1 -ftime 10
I flashed the cards with the Hynix 30 mh/s rom file. And use the AMD Wattman to boost the core to 1350 , and memory to 2200 stable.
Should I try another miner or version to fix the drop for 1 card or ?
What I see as well when the DAG is being crated - the first 5 cards are like 4080 something. And then the one card is 9000 how is that possible ?
Thnx !
I've being mining over like 7 months now.
With 6x Rx580 Sapphire 8 GB.
All my cards were giving me 29,9 stable.
And now one of my cards drops to 9 / 8 / 10 / 11 mh/s out of nowhere.
Is the card brikked or is the configuration wrong ?
This is the start-up line I use when I am mining.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal WALLETNAME.Setup01-Miner/EMAIL -epsw x -mode 1 -ftime 10
I flashed the cards with the Hynix 30 mh/s rom file. And use the AMD Wattman to boost the core to 1350 , and memory to 2200 stable.
Should I try another miner or version to fix the drop for 1 card or ?
What I see as well when the DAG is being crated - the first 5 cards are like 4080 something. And then the one card is 9000 how is that possible ?
Thnx !
There are tests for video cards. have you run them?
Also you can switch to default BIOS and see whether it makes a difference.
By doing series of tests with what you already have at your disposal you can rule out culprits one by one.
You might want to decrease the memory clock and see if this card just cant work in long term @that clock
August 24, 2017, 08:21:03 PM
Hi everyone, I hate to ask this question when it could be resolved with plain old trial and error, but it is extremely hot in the building where my rigs are kept and the last time I went out there for maintenance I was nearly roasted alive.
I have 6 card rigs with modded bios 480's/470's; win10 64; 16.9.2 drivers; watttool 0.92; and claymore 9.3
I want to use the latest AMD blockchain driver, and claymore 9.8 but I've read mixed reports of whether or not clock/voltage control is possible. Some have said watttool works now, others said that it looks like it works but doesn't actually change clocks/voltages. Folks are saying the same thing about the latest beta release of Afterburner (It works; It doesn't work; It looks it works but doesnt actually change anything...etc).
Can anyone with a similar setup please confirm that clock/voltage control is possible, and do I need pixel patcher for modded cards?
Thanks!
I have 6 card rigs with modded bios 480's/470's; win10 64; 16.9.2 drivers; watttool 0.92; and claymore 9.3
I want to use the latest AMD blockchain driver, and claymore 9.8 but I've read mixed reports of whether or not clock/voltage control is possible. Some have said watttool works now, others said that it looks like it works but doesn't actually change clocks/voltages. Folks are saying the same thing about the latest beta release of Afterburner (It works; It doesn't work; It looks it works but doesnt actually change anything...etc).
Can anyone with a similar setup please confirm that clock/voltage control is possible, and do I need pixel patcher for modded cards?
Thanks!
August 24, 2017, 07:39:26 PM
I just have a question about the miner.
I've being mining over like 7 months now.
With 6x Rx580 Sapphire 8 GB.
All my cards were giving me 29,9 stable.
And now one of my cards drops to 9 / 8 / 10 / 11 mh/s out of nowhere.
Is the card brikked or is the configuration wrong ?
This is the start-up line I use when I am mining.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal WALLETNAME.Setup01-Miner/EMAIL -epsw x -mode 1 -ftime 10
I flashed the cards with the Hynix 30 mh/s rom file. And use the AMD Wattman to boost the core to 1350 , and memory to 2200 stable.
Should I try another miner or version to fix the drop for 1 card or ?
What I see as well when the DAG is being crated - the first 5 cards are like 4080 something. And then the one card is 9000 how is that possible ?
Thnx !
I've being mining over like 7 months now.
With 6x Rx580 Sapphire 8 GB.
All my cards were giving me 29,9 stable.
And now one of my cards drops to 9 / 8 / 10 / 11 mh/s out of nowhere.
Is the card brikked or is the configuration wrong ?
This is the start-up line I use when I am mining.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal WALLETNAME.Setup01-Miner/EMAIL -epsw x -mode 1 -ftime 10
I flashed the cards with the Hynix 30 mh/s rom file. And use the AMD Wattman to boost the core to 1350 , and memory to 2200 stable.
Should I try another miner or version to fix the drop for 1 card or ?
What I see as well when the DAG is being crated - the first 5 cards are like 4080 something. And then the one card is 9000 how is that possible ?
Thnx !
There are tests for video cards. have you run them?
Also you can switch to default BIOS and see whether it makes a difference.
By doing series of tests with what you already have at your disposal you can rule out culprits one by one.
August 24, 2017, 07:37:05 PM
Hi Claymore
Have you managed to replicate the issue with 12 gpu systems
issue: on version 9.8 if you have more than 3 amd cards in a rig of 11 or 12 gpus ethdcrminer hangs on Algorith ASM, if you start the instance with 3 amd cards and the rest nvidia then it starts mining. then you have to start another instance of ethdcrminer with the remaining cards, .
This issue was also experienced by a youtube channel Cryptomined where he had to have multiple instances on 9.8 running in order to use all the cards.
When all cards are selected after the cmd window hangs nothing but a hard reset solves the hang.
Hope that helps, if you need any more info or troubleshhooting with this regards you can let me know.
thanks
Have you managed to replicate the issue with 12 gpu systems
issue: on version 9.8 if you have more than 3 amd cards in a rig of 11 or 12 gpus ethdcrminer hangs on Algorith ASM, if you start the instance with 3 amd cards and the rest nvidia then it starts mining. then you have to start another instance of ethdcrminer with the remaining cards, .
This issue was also experienced by a youtube channel Cryptomined where he had to have multiple instances on 9.8 running in order to use all the cards.
When all cards are selected after the cmd window hangs nothing but a hard reset solves the hang.
Hope that helps, if you need any more info or troubleshhooting with this regards you can let me know.
thanks
Newbie with 12 cards setup? Did you go straight to uni after 5th grade?
August 24, 2017, 07:34:32 PM
I'm using command -r 1 with reboot file "shutdown /r /t 0 /f"
But most of reboots freezes during closing windows 10.
Did you have similar problem? Can't find solution so far
But most of reboots freezes during closing windows 10.
Did you have similar problem? Can't find solution so far
Does it work every-time when you run reboot.bat manually?
If yes then there are no issues with your file.
If it is not activated when your computer freezes then you have to looks elsewhere.
Looks like you OCed too much. Greed is a sin.
August 24, 2017, 07:31:21 PM
please help
mining on 3gpu rig pny nvidia 1070 8gb 3 gpu cards mining on claymore,s dual mininer eth only
i have only getting total 6.99 of 3 cards why its happend
mining on 3gpu rig pny nvidia 1070 8gb 3 gpu cards mining on claymore,s dual mininer eth only
i have only getting total 6.99 of 3 cards why its happend
The more info you provide, the better.
What OS? BIOS mod? Which version to Claymore? etc...
windows 10
v9.8
i dont know what is the bios mod i have z270 A prime motherboard
help me
Perform: RUN>WINVER .... What version and build you Windows is?
August 24, 2017, 07:29:19 PM
please help
mining on 3gpu rig pny nvidia 1070 8gb 3 gpu cards mining on claymore,s dual mininer eth only
i have only getting total 6.99 of 3 cards why its happend
mining on 3gpu rig pny nvidia 1070 8gb 3 gpu cards mining on claymore,s dual mininer eth only
i have only getting total 6.99 of 3 cards why its happend
Manually install Windows Creators update.
August 24, 2017, 07:28:40 PM
Having an issue on one mining rig after having to wipe drivers and install from scratch.
When running claymore everything works fine, but slowly it kills the internet connection on the machine. The latency gets worse and worse until I can no longer TV into it. If I shut down claymore the problem goes away. I've tried 9.7 and 9.8. Using AMD driver 17.6.2.
Anyone else run into this?
I'll also add I can mine with claymore monero miner just fine. It doesn't cause any interference with the network.
When running claymore everything works fine, but slowly it kills the internet connection on the machine. The latency gets worse and worse until I can no longer TV into it. If I shut down claymore the problem goes away. I've tried 9.7 and 9.8. Using AMD driver 17.6.2.
Anyone else run into this?
I'll also add I can mine with claymore monero miner just fine. It doesn't cause any interference with the network.
Do you mean WiFi by internet connection?
WiFi can be interfered by electrical/magnetic filed.
Keep the router away from the rig. Use WiFi dongles on long USB cables at least.
August 24, 2017, 06:52:02 PM
guys please help me.
ethOSethOS and fan control not working
hi guys, I am trying understand what is going on with my rig.
I have 2 more rigs working perfectly , the thing with the third one is not saving the fan speed at all.
I have 3 rigs with 6 gtx 1060 2 are working ok but this one is not working for some reason the fan speed
.
see: http://imgur.com/a/LMtL8
I have changed = fan, globalfan and still not getting the value I inserted and the fan speed it is auto.
someone know what is going on? how can I fix this?, how this is possible if I have the same config in other 2 rigs?
this is my config
.##################
globalfan 85
maxgputemp 80
globalminer claymore
stratumproxy enabled
# custompanel excavabucket
proxypool1 eth-ar.dwarfpool.com:8008
proxypool2 eth-br.dwarfpool.com:8008
flags --cl-global-work 8192 --farm-recheck 200
proxywallet eth-wallet.....
autoreboot true
# reb 1
loc e9ddd1 watter
pwr e9ddd1 87 87 87 87 87 87
fan e9ddd1 85 85 85 85 85 85
mem e9ddd1 5000 5000 5000 5000 5000
.######################
ethOSethOS and fan control not working
hi guys, I am trying understand what is going on with my rig.
I have 2 more rigs working perfectly , the thing with the third one is not saving the fan speed at all.
I have 3 rigs with 6 gtx 1060 2 are working ok but this one is not working for some reason the fan speed
.see: http://imgur.com/a/LMtL8
I have changed = fan, globalfan and still not getting the value I inserted and the fan speed it is auto.
someone know what is going on? how can I fix this?, how this is possible if I have the same config in other 2 rigs?
this is my config
.##################
globalfan 85
maxgputemp 80
globalminer claymore
stratumproxy enabled
# custompanel excavabucket
proxypool1 eth-ar.dwarfpool.com:8008
proxypool2 eth-br.dwarfpool.com:8008
flags --cl-global-work 8192 --farm-recheck 200
proxywallet eth-wallet.....
autoreboot true
# reb 1
loc e9ddd1 watter
pwr e9ddd1 87 87 87 87 87 87
fan e9ddd1 85 85 85 85 85 85
mem e9ddd1 5000 5000 5000 5000 5000
.######################
August 24, 2017, 06:38:03 PM
Some quick feedback for Claymore on the messaging used with regards to the DevFee. When I first read in the logs "DevFee: stop mining and disconnect" I thought it was telling me to stop mining because the Dev Fee wasn't getting "paid" properly. As in, "you aren't paying the Dev Fee, stop using this software". I see now based on your response below that this actually means that the DevFee mining has stopped and has disconnected from the pool. You may want to consider changing this to something like "DevFee: stopped mining and disconnected". Or maybe add something like "DevFee: mining complete, thanks for your support".
Maybe I'm the only one that was confused by this but if there are others like me it could help clear things up! Thanks.
Maybe I'm the only one that was confused by this but if there are others like me it could help clear things up! Thanks.
Miner shows everything related to devfee. It must show "DevFee: start mining" and after 36 or 72 seconds it must write "DevFee: stop mining and disconnect". You can enable logging to file with option "-dbg 1" and then search all these strings. If you see some strange things, please PM me the log file so I can check it.
You can also decrease "-ethi" value to "8" or to "4" and check if it works more stable. This miner loads GPUs more than standard miner so if you overclocked GPUs you should check stability of this miner without overclocking, you can assign only one rig for such tests.
If you think that this miner steals your power you can download WireShark and check all packets that miner sends when you see something strange, it is not a complex task. And, of course, you can wait for more stable version if current version does not work for you, or do not use this miner at all.
You can also decrease "-ethi" value to "8" or to "4" and check if it works more stable. This miner loads GPUs more than standard miner so if you overclocked GPUs you should check stability of this miner without overclocking, you can assign only one rig for such tests.
If you think that this miner steals your power you can download WireShark and check all packets that miner sends when you see something strange, it is not a complex task. And, of course, you can wait for more stable version if current version does not work for you, or do not use this miner at all.
August 24, 2017, 05:32:22 PM
How do you get 12 GPUs in a rig? What board has 12 slots?
Asrock H110 pro BTC
https://www.newegg.com/Product/Product.aspx?Item=N82E16813157781&cm_re=asrock_h110_pro_btc-_-13-157-781-_-Product
I was going to go for some X11 ASICs but this freak accident forcing me to buy a new MB is a sign, to get more GPUs instead. I think XMR will pick up where ETH drops off anyhow. I'm going with this board and a Pentium... I remember those... from decades ago... heh
"produced by Intel since 1993" -- https://en.wikipedia.org/wiki/Pentium
uhh.. make that two and a half decades ago.
August 24, 2017, 04:39:43 PM
How do you get 12 GPUs in a rig? What board has 12 slots?
Asrock H110 pro BTC
https://www.newegg.com/Product/Product.aspx?Item=N82E16813157781&cm_re=asrock_h110_pro_btc-_-13-157-781-_-Product
August 24, 2017, 04:00:58 PM
Biostar TB250-BTC PRO - 12 pcie slots
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
How do you get 12 GPUs in a rig? What board has 12 slots?
What are the odds of me not 15 mins after posting this question frying all of my mainboard pcie slots an a rig by touching the pinout on a card to the case? How did I manage to fry them all in one shot? lol
You "ground" a shit in this case.
Just waiting on a few confirmations and a new ASrock H110 Pro BTC+ will be on its way, a forced upgrade. *sigh* Ask and you shall receive, that's how it works right?
That 19 slot board is some kind of myth, lots of talk but nobody selling.
August 24, 2017, 03:36:04 PM
Biostar TB250-BTC PRO - 12 pcie slots
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
How do you get 12 GPUs in a rig? What board has 12 slots?
What are the odds of me not 15 mins after posting this question frying all of my mainboard pcie slots an a rig by touching the pinout on a card to the case? How did I manage to fry them all in one shot? lol
You "ground" a shit in this case.
August 24, 2017, 03:02:48 PM
Biostar TB250-BTC PRO - 12 pcie slots
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
How do you get 12 GPUs in a rig? What board has 12 slots?
What are the odds of me not 15 mins after posting this question frying all of my mainboard pcie slots an a rig by touching the pinout on a card to the case? How did I manage to fry them all in one shot? lol
August 24, 2017, 02:46:32 PM
Since the rx580's came out, I have been using the mixed driver trick to get my rigs running on 7+ gpus of miscellaneous 470/480/570/580 cards in Windows 10. With the newer released official drivers, do I still need to do this?
Also, regarding the beta blockchain driver, is AMD really done developing this driver? I have seen mixed messages on that. I got a nice bump on them but cant control voltages and cant control overclocks in Claymore.
thanks!
Also, regarding the beta blockchain driver, is AMD really done developing this driver? I have seen mixed messages on that. I got a nice bump on them but cant control voltages and cant control overclocks in Claymore.
thanks!
Can you define "bump" in MH?
About 1.0 - 1.4 m/h per card. Basically restored some of the lost MH from when I started mining in May. I would love to use this driver on all my rigs but need control of the voltages or it is wasted on energy and high temps.
Did you check power draw at the wall before and after. 1 m/h increase would be simple to gain on mine if i gave it more electricity to eat.
August 24, 2017, 02:32:47 PM
Biostar TB250-BTC PRO - 12 pcie slots
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
ASrock H110 Pro BTC+ - 13 pcie slots
and now the ASUS B250 Expert Mining 19 pcie slots
I will say it can be a pain in the ass to track down issues with that many GPUs.
How do you get 12 GPUs in a rig? What board has 12 slots?
Other than saving the cost of a MB, HD, mem,psu and CPU ($350 what advantages do you get from a 12 cpu rig versus a 6 gpu rig?
Jump to: