Hello
I have an h110 pro btc motherboard, and after going around many times because 3 gpus could not apply -strap I discovered that you have to do with pcie ports.
I explain, for some reason 3 of the 13 ports if I connect a gpu to them does not allow to apply -strap
I have checked changing ports gpus, risers, cables, etc. and it is always those three ports that do not allow to apply -strap, if I put in those 3 ports -strap 0 that gpus work well, but with its modified bios (31 mhs) or bios stock (25 mhs)
I thought it could be the bios gen configuration, so I tried to change gen1, gen2 and automatic gen, but without changes.
Apparently those 3 pcie ports are not broken, using bios mods the gpus reach 31 mhs, normal would say, but as soon as I apply -strap they restart.
Anyone know how to shed light on the problem? : )
thanks!!
edit: rig with 12 gpus, rx 580, 570 of 4 and 8 GB
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 66. (Read 6590757 times)
December 07, 2019, 01:46:28 AM
December 06, 2019, 05:33:08 PM
I've updated to Claymore V15. It says 16 pools are set for this miner but it is mining on my account at nano pool. How do I delete the other pools?
December 05, 2019, 07:20:45 AM
Hi dear miners
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
each and every card is different even if you have two identical gpus
it mostly relies on chip quality which can also be checked by gpuz
no two identical cards may run with exactly same configuration
so i will say check the card one at a time for its stable settings
Thanks for answer
Check this out : i have 3 rx470 msi armor identical 3 cards memory everything looks like they been manufactured at same time but 2 of them works same setting but 1 insist on 2040mhz memory and 930mv on core,it makes me crazy
Agree, GPUs doesnt made by copy-paste method
December 05, 2019, 01:56:26 AM
Hi dear miners
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
each and every card is different even if you have two identical gpus
it mostly relies on chip quality which can also be checked by gpuz
no two identical cards may run with exactly same configuration
so i will say check the card one at a time for its stable settings
Thanks for answer
Check this out : i have 3 rx470 msi armor identical 3 cards memory everything looks like they been manufactured at same time but 2 of them works same setting but 1 insist on 2040mhz memory and 930mv on core,it makes me crazy
December 05, 2019, 12:28:46 AM
Hi dear miners
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
each and every card is different even if you have two identical gpus
it mostly relies on chip quality which can also be checked by gpuz
no two identical cards may run with exactly same configuration
so i will say check the card one at a time for its stable settings
December 04, 2019, 11:13:50 PM
Hi dear miners
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
is there man who can share stable working setups for these headache memory straps???
i have all samsung elpida micron hynix.... rx470 480 570 580 4...8gb
My some cards runs 2-3 days some of then crash. whatchdog says restart miner.i wish could be nice if it crashes right away, so i know it crashed.it is annoying it crashes and you dont know until you check it.
my rigs are not stable under 930mv on core, 900mv works for 2-3 days some cards just crash after 6 hour.i dont understand why it doesnt crash right away.it is difficult monitor each cards behavior because different model memory brand.and i dont understand people who can get stable card with 835mv??? non of my cards work at this voltage.for me voltage not problem i can waste extra watts for me is important to be stable with NO crashes at least for a week,then i can restart whole rig
Thanks
December 04, 2019, 11:00:32 PM
Hello
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
i wouldnt apply strap to allready modified bios, you have choice use modified bios or stock bios with claymores strap.
flash your cards to stock bios then try again,and also dont forget virtual memory set high as you can.
December 04, 2019, 07:24:51 PM
Hello
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
Trying to configure strap and rxboost in a rig with 12 gpus I have some doubt, I would appreciate any help
Rig with rx 580, 570 4gb, 8gb, 9 gpus without problem, but in 3 of them I can't apply a strap because they restart.
The 3 gpus do not seem to have anything different from the rest, hynix memory, 4gb, sapphire (2 nitro and 1 pulse).
When I put for example strap 1, they restart, so I have 9 gpus with strap and 3 with strap 0, and rxboost 100 for all.
I have tried using other raisers, connecting a monitor emulator and nothing changes.
I am applying a strap over the previously modified bios.
Maybe if I put original bios strap works?
Apologies for writing bad english.
Regards : )
December 04, 2019, 05:11:05 PM
6 x gigabyte GTX 1070 8gb
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Increase the virtual memory by 8gb.
December 04, 2019, 01:17:23 AM
6 x gigabyte GTX 1070 8gb
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Increase the virtual memory by 8gb.
December 03, 2019, 06:59:56 AM
Hi I have copied my previous bat file from my 11.9 version to the V15 now it says it mining to the default address instead of mine clearly something simple but help would be appreciated thanks
December 03, 2019, 01:47:38 AM
Did anyone ever really measure hashrate with claymores miner?
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
I actually had this happen and it was driving me crazy and was trying all sorts of tests to find out why it was happening. However basically it was some antivirus program that ran every day at 3AM because it assumed the computer wasn't in use.
The virus scanner doesn't really take too many resources however it does use some CPU power and the issue is that depending on the CPU you have, it might reduce your mining speed on the GPUs even though Claymore miner uses like 1% CPU usage most times.
Just check what you have running in the background, most likely its some virus scanner.
December 02, 2019, 08:32:27 PM
I just upgraded to v15 on Windows 10 and now when running the start.bet I get a windows error "This app can't run on your PC".
Has no one else run into this?
Has no one else run into this?
December 02, 2019, 05:35:22 PM
Did anyone ever really measure hashrate with claymores miner?
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time.I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
In any case when mining with other miner it should be the same but it is not.
December 02, 2019, 12:02:18 PM
Did anyone ever really measure hashrate with claymores miner?
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time.I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
In any case when mining with other miner it should be the same but it is not.
December 02, 2019, 10:30:13 AM
Did anyone ever really measure hashrate with claymores miner?
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
Maybe Claymore raises the temperature in the room more than the other miners in the specified time range. Another possible reason is that your computer makes some software updates every night at that time. I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
December 02, 2019, 04:11:29 AM
Did anyone ever really measure hashrate with claymores miner?
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
I noticed in graph that my hashrate drops significally at 3-5 AM every night, until with some other miner doesn't it is almost all the time the same graph/hashrate!
December 02, 2019, 12:29:03 AM
6 x gigabyte GTX 1070 8gb
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Page file add up to 32 gb Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
December 01, 2019, 01:10:39 PM
Have we to specify the -wd parameter to enable wacthdog in config file or are enable by default?
I´m asking this because miner gets stucked on:
20:48:27:096 2374 ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35
20:48:27:098 2374 ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s
20:48:30:010 20ec em hbt: 0, fm hbt: 0,
20:48:30:010 20ec watchdog - thread 0 (gpu0), hb time 422
20:48:30:011 20ec watchdog - thread 1 (gpu0), hb time 47
20:48:30:011 20ec watchdog - thread 2 (gpu1), hb time 469
20:48:30:011 20ec watchdog - thread 3 (gpu1), hb time 109
20:48:30:012 20ec watchdog - thread 4 (gpu2), hb time 82547
20:48:30:015 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:015 20ec watchdog - thread 5 (gpu2), hb time 82922
20:48:30:018 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:019 20ec watchdog - thread 6 (gpu3), hb time 485
20:48:30:020 20ec watchdog - thread 7 (gpu3), hb time 141
20:48:30:021 20ec watchdog - thread 8 (gpu4), hb time 125
20:48:30:021 20ec watchdog - thread 9 (gpu4), hb time 469
20:48:30:022 20ec watchdog - thread 10 (gpu5), hb time 141
20:48:30:023 20ec watchdog - thread 11 (gpu5), hb time 485
20:48:30:024 20ec watchdog - thread 12 (gpu6), hb time 125
20:48:30:024 20ec watchdog - thread 13 (gpu6), hb time 469
20:48:30:025 20ec watchdog - thread 14 (gpu7), hb time 485
20:48:30:025 20ec watchdog - thread 15 (gpu7), hb time 141
And doesn´t have restarted..
I´m asking this because miner gets stucked on:
20:48:27:096 2374 ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35
20:48:27:098 2374 ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s
20:48:30:010 20ec em hbt: 0, fm hbt: 0,
20:48:30:010 20ec watchdog - thread 0 (gpu0), hb time 422
20:48:30:011 20ec watchdog - thread 1 (gpu0), hb time 47
20:48:30:011 20ec watchdog - thread 2 (gpu1), hb time 469
20:48:30:011 20ec watchdog - thread 3 (gpu1), hb time 109
20:48:30:012 20ec watchdog - thread 4 (gpu2), hb time 82547
20:48:30:015 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:015 20ec watchdog - thread 5 (gpu2), hb time 82922
20:48:30:018 20ec WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:019 20ec watchdog - thread 6 (gpu3), hb time 485
20:48:30:020 20ec watchdog - thread 7 (gpu3), hb time 141
20:48:30:021 20ec watchdog - thread 8 (gpu4), hb time 125
20:48:30:021 20ec watchdog - thread 9 (gpu4), hb time 469
20:48:30:022 20ec watchdog - thread 10 (gpu5), hb time 141
20:48:30:023 20ec watchdog - thread 11 (gpu5), hb time 485
20:48:30:024 20ec watchdog - thread 12 (gpu6), hb time 125
20:48:30:024 20ec watchdog - thread 13 (gpu6), hb time 469
20:48:30:025 20ec watchdog - thread 14 (gpu7), hb time 485
20:48:30:025 20ec watchdog - thread 15 (gpu7), hb time 141
And doesn´t have restarted..
I had a simillar stalling with one of my GPUs it turned out that the stalling GPU wasn't able to keep up with the low voltage that i put. Can I ask you if those cards are VEGAS and what are your settings both in the miner and the AMD panel and drivers please. Thank you in advance.
Hi,
I use the win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13.
Win 10 64 bit 1703 version.
Seems stable now, maybe was i use vnc remote for seing the rig.
I use ODNT like this:
Gpu 1009@875mv
Mem 1050@900mv
for 8 vega 64
All the system consume 1900 watts.
Have you corrected your problem increase the low voltage for gpu or mem?
Shouldn´t miner restart himself when see this problem? or we have to wait some time?
Best luck for you
December 01, 2019, 12:34:38 PM
6 x gigabyte GTX 1070 8gb
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Windows 10
4GB DDR4 Ram on Motherboard
Additional 16-24GB Virtual Memory.
60GB SSD drive.
the farm stopped working on 6 cards, shows the DAG file in red on any card and immediately reboots the miner, disconnected one card, it works with 5 cards, please help.
Jump to: