Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 67. (Read 6590757 times)

I had a simillar stalling with one of my GPUs it turned out that the stalling GPU wasn't able to keep up with the low voltage that i put. Can I ask you if those cards are VEGAS and what are your settings both in the miner and the AMD panel and drivers please. Thank you in advance.

The driver you are using is very old ... you need to install a more updated driver and change to compute mode, otherwise you will not be able to reach good speeds.

Come on over to Team Red Miner we will help you out and get your Vegas running at 48-49 mhs running their Ethash Miner.

https://discord.gg/SBH5TPe

Have we to specify the -wd parameter to enable wacthdog  in config file or are enable by default?


I´m asking this because miner gets stucked on:

20:48:27:096   2374   ETH - Total Speed: 341.362 Mh/s, Total Shares: 208, Rejected: 0, Time: 00:35
20:48:27:098   2374   ETH: GPU0 47.980 Mh/s, GPU1 48.846 Mh/s, GPU2 0.000 Mh/s, GPU3 48.985 Mh/s, GPU4 48.786 Mh/s, GPU5 48.992 Mh/s, GPU6 48.784 Mh/s, GPU7 48.989 Mh/s
20:48:30:010   20ec   em hbt: 0, fm hbt: 0,
20:48:30:010   20ec   watchdog - thread 0 (gpu0), hb time 422
20:48:30:011   20ec   watchdog - thread 1 (gpu0), hb time 47
20:48:30:011   20ec   watchdog - thread 2 (gpu1), hb time 469
20:48:30:011   20ec   watchdog - thread 3 (gpu1), hb time 109
20:48:30:012   20ec   watchdog - thread 4 (gpu2), hb time 82547
20:48:30:015   20ec   WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:015   20ec   watchdog - thread 5 (gpu2), hb time 82922
20:48:30:018   20ec   WATCHDOG: GPU 2 hangs in OpenCL call, exit
20:48:30:019   20ec   watchdog - thread 6 (gpu3), hb time 485
20:48:30:020   20ec   watchdog - thread 7 (gpu3), hb time 141
20:48:30:021   20ec   watchdog - thread 8 (gpu4), hb time 125
20:48:30:021   20ec   watchdog - thread 9 (gpu4), hb time 469
20:48:30:022   20ec   watchdog - thread 10 (gpu5), hb time 141
20:48:30:023   20ec   watchdog - thread 11 (gpu5), hb time 485
20:48:30:024   20ec   watchdog - thread 12 (gpu6), hb time 125
20:48:30:024   20ec   watchdog - thread 13 (gpu6), hb time 469
20:48:30:025   20ec   watchdog - thread 14 (gpu7), hb time 485
20:48:30:025   20ec   watchdog - thread 15 (gpu7), hb time 141


And doesn´t have restarted.. 

Did you switch to Compute from Graphics in GPU workload?
https://www.amd.com/en/support/kb/faq/dh-024
[/quote]

This option is available in a version 17.10.2
im using 17.8.1

43.8 - 44.2 MH/s
Above settings with OverdriveNtool plus Soft Powerplay tables.
AMDmem Tweak Vega 56 weak settings.


Did you switch to Compute from Graphics in GPU workload?
https://www.amd.com/en/support/kb/faq/dh-024

hello.I have a problem
use Windows 10 pro
6 rx570 4 giga
divers 17.8.1
Use the latest version claymore 15 but hashrat is low 12 mh for card
bat : setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x0e65d0Cc9aBeFb8fE504D7438057Bb9816a20560.ash2 -epsw x
Anyone one can help

What is your mining speed if i may ask with these settings?

Hi there I am recently switching from Mining Moreno and I am new to Ehterium mining. On my main PC I have VEGA 64 with the latest drivers clocked to 1450 and memory to 1125 with 49MH speed and on my 13GPU VEGA 64 RIG I have 18.5.2 drivers Overdrive Ntool settings with 870mm memory to 1100 and clock to 1400 with 44MH speed. Can someone give me some info if there is a way to squeeze some extra hashes with some tweaks and settings, I have the default mining settings. Thank you

Hi thanks for answer,

What i mean was not the windows startup, but an startup script for the claysmore :  something like:  --startupscript , like other miners have for ex: srbminer

Regards

Hi thanks for answer,

What i mean was not the windows startup, but an startup script for the claysmore :  something like:  --startupscript , like other miners have for ex: srbminer

Regards

Press WIN+R and type shell:startup

then paste a shortcut to the claymore batch file there to run on windows startup.


Add this line to the beginning of the .bat file to delay initialization by 30 seconds:
msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..."

For example:

msg/time:15 /w * "Delay of 30 seconds. Waiting for windows to start ..."
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -rxboost 1

I am assuming you are using Windows. If so then just drag the *.bat file into your Windows Start button or if that doesn't work then just right click and select the Move to startup folder. If these don't work then you can always run the Run command and type in shell:startup and just drag the *.bat file into that directory.

My advice to you is if you want to run it on startup then you should delay it by 30-60 seconds or so, because I had issues with Claymore starting right away and Windows was still loading other apps and overclocking a few GPUs and undervolting them. So in your *.bat file put "timeout /t 60".

Reason why he didn't put it in Readme is because its outside the scope of the miner program, those that need it to autorun just do it manually.

You can find your own best settings as each and every card is different and it won't overclock the same.
As there is no way to increase memory voltage. Increase memory speed by increments of 25 MHz until it is unstable.
After this reduce core clock and core voltage in a similar fashion until it starts affecting the hashrate.
Use HWInfo for any memory errors and display monitor to detect if there are any artefacts visible on the screen.

My Vega 56 flash 64 air bios. Mem - 1095MHz; Core - 1246MHz; Cove(v) - 1025mV; fan - 66%

Hi,

Any parameter that we can add to run a startup script?

I´m not finding anything in readme,

Thanks

Hi

I am testing the option of -rxboost and -strap and I have a problem.
I leave two captures, the second card, the one marked has the original bios, the rest modified bios.

https://imgur.com/UwKg9t7

https://imgur.com/zMIhxF8

If I know a monitor emulator it makes me 33.2 mhs and if I remove the emulator it goes down to 29 mhs (less than with my bios modifications that gives approximately 31 mhs)

Do you know if there is any solution for this?

Use a monitor emulator on all cards?

Regards : )

Who has the best settings for Vega64 OverdriveNTool???

Go to download menu of Chrome ( where all downloades displayed) , and choose to download the file understanding the risks.

if the website is working slow or does not load
use a vpn or proxy
alternatively use opera private which has vpn built in and try again