Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 794.

sofianeelec

newbie

Activity: 22

Merit: 0

hello,

i have probleme with claymore miner

the miner do not restart when gpu hang, i need to reboot all the rig to start miner correctly

the claymore miner stop mining, and the wd is activated and can i know witch gpu hang, and the miner try to restart but hang and not continue,

befor i do not have this probleme, when gpu hang the miner restart correctly and keep mining with any probleme

All your help are welcome

Thanks

insaniak

full member

Activity: 137

Merit: 100

Quote from: gateway on June 23, 2017, 02:51:01 PM

Quote from: insaniak on June 23, 2017, 01:38:17 PM

Issues with ethminer error stops working.
Windows say it is running low on memory. I have set virtual memory to 16GB I'm not sure what is going on.
Windows 10
8 1070s

What is your actual value you put in for the virtual memory box? I would assume you put in 16000 first of all correct? Also you can run the taskmanager to see what apps are taking up memory on your system. Hopefully you have more than 4 gigs of memory as well. Check what other programs are being launched at start up and disable them to get more memory back.. etc..

16000 correct. Also I opened task manager memory when ethminer running is 50% I do only have 4GB but that hasn't seemed to be an issue on my 7 GPU rigs. I have disabled all non essential startup processes and services. Its seems to be inconsistent for when it displays that messages sometimes its in 12 hrs other times within 30 mins.

Bitblockchain

newbie

Activity: 15

Merit: 0

I have R9 280x not overclocked. I started mining with claymore and Nicehash pool. Today most of the time I'm mining at 13mhs, but at unregulated time I see the mhs is raised to 25mhs in Nicehash pool. And the temperature of the card is raised to 80 degrees. At 13mhs the temp is 67 degrees. Why is that happen? Who control my card at how much mhs will mining?
What could be the reason?
My configuration bat file is:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal mywallet.worker1 -epsw x -r 1 -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal mywallet .worker1

gateway

hero member

Activity: 552

Merit: 500

Quote from: insaniak on June 23, 2017, 01:38:17 PM

Issues with ethminer error stops working.
Windows say it is running low on memory. I have set virtual memory to 16GB I'm not sure what is going on.
Windows 10
8 1070s

What is your actual value you put in for the virtual memory box? I would assume you put in 16000 first of all correct? Also you can run the taskmanager to see what apps are taking up memory on your system. Hopefully you have more than 4 gigs of memory as well. Check what other programs are being launched at start up and disable them to get more memory back.. etc..

insaniak

full member

Activity: 137

Merit: 100

Issues with ethminer error stops working.
Windows say it is running low on memory. I have set virtual memory to 16GB I'm not sure what is going on.
Windows 10
8 1070s

weareken

newbie

Activity: 27

Merit: 0

Quote from: preda on June 23, 2017, 09:38:56 AM

Quote from: nils8107 on June 23, 2017, 05:24:40 AM

Quote from: preda on June 23, 2017, 03:44:16 AM

Quote from: ?? on ??

Quote from: weareken on June 22, 2017, 11:34:48 PM

Anyone using the MSI Z170-A Pro for more than 4 GPUs?

I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.

I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.

Any ideas?

i dont like Windows for mining... but
what psu do you have?
are gpus on stock settings?

I have that motherboard and i am mining with 6 gpu as well...
I remember i had to update the bios to the last version and enable the 4g decoding
I have to check when i go in the office for be sure.
But it run 6 gpu very good

I have the same Mainboard.
I run 7GPUs GTX 1070 on that.

Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfI

I have 4GB RAM, Windows 10 X64

I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT.

Oh yes i forgot you have to transform windows 10 in uefi mode gpt. If you have difficulty in this you can use aoemi partition assistant it will transform your mbr into gpt in 3 seconds without struggling....

I had to transform gpt hard drive and boot for all my rigs otherwise you won't be able to use more than 4 gpu

Thanks for these suggestions. I'll give them a try tonight. Yes, even at stock settings can't get past the Create Buffer step before a hard hang

I'm starting to think it might be the PSU's. I'm running two RaidMax 850W Gold PSUs. Maybe it's not liking that.

preda

sr. member

Activity: 756

Merit: 250

Quote from: juvx on June 23, 2017, 12:10:06 PM

Hi sorry im new to dual mining.

I just ran my single 1080ti on Eth + LBry and the eth does well about 37 MH (which is my normal Hashrate) but the LBry is really low like only 34 MH.. is this normal for performance to be this low? I normally get 513MH when mining just LBRY. Also, the card doesnt seem like it's running at full potential its only running at like 64 C which is nice, but i feel like a lot more LBRY should be squized out of it.

Any ideas or suggestions? could it be my version of windows (enterprise) or maybe the new nvda drivers?

should i choose a differant 2nd currency with the 1080ti?

Or is it normal to loose that much HS because im mining two and im just being greedy LOL

btw just doing testing atm.. my main rig is 7x1070s and have one with 3x 1080TIs... currently just running NICEHASH on everything.

Yes lbc is the same like eth

Sia coin is different and all second coins too...
Lbc is the more profitable and the more expensive in power

preda

sr. member

Activity: 756

Merit: 250

Quote from: coinzoid on June 23, 2017, 11:58:06 AM

Quote from: preda on June 23, 2017, 09:42:17 AM

Quote from: preda on June 23, 2017, 05:17:12 AM

Hi guys, why i get this hashrate? Up and down static it is normal?

Someone knows this problem?☝

Could be GPU overclock/voltage issue, could be internet connection issue. But IMO you may need to discover which card gives memory errors and try to fix it. Then you will get better results.

The problem is claymore don't give me any error.
So wjat could be? Internet? I am using sim card with smartphone hotspot wifi i still don't have adsl in the office

juvx

newbie

Activity: 38

Merit: 0

Hi sorry im new to dual mining.

I just ran my single 1080ti on Eth + LBry and the eth does well about 37 MH (which is my normal Hashrate) but the LBry is really low like only 34 MH.. is this normal for performance to be this low? I normally get 513MH when mining just LBRY. Also, the card doesnt seem like it's running at full potential its only running at like 64 C which is nice, but i feel like a lot more LBRY should be squized out of it.

Any ideas or suggestions? could it be my version of windows (enterprise) or maybe the new nvda drivers?

should i choose a differant 2nd currency with the 1080ti?

Or is it normal to loose that much HS because im mining two and im just being greedy LOL

btw just doing testing atm.. my main rig is 7x1070s and have one with 3x 1080TIs... currently just running NICEHASH on everything.

coinzoid

sr. member

Activity: 476

Merit: 250

Quote from: preda on June 23, 2017, 09:42:17 AM

Quote from: preda on June 23, 2017, 05:17:12 AM

Hi guys, why i get this hashrate? Up and down static it is normal?

Someone knows this problem?☝

Could be GPU overclock/voltage issue, could be internet connection issue. But IMO you may need to discover which card gives memory errors and try to fix it. Then you will get better results.

preda

sr. member

Activity: 756

Merit: 250

Quote from: JustCauseBIH on June 23, 2017, 10:29:19 AM

Well share how did you fix it, god damn! If you ask on board, than share also!

I 200% agree

JustCauseBIH

member

Activity: 91

Merit: 10

Well share how did you fix it, god damn! If you ask on board, than share also!

preda

sr. member

Activity: 756

Merit: 250

Quote from: preda on June 23, 2017, 05:17:12 AM

Hi guys, why i get this hashrate? Up and down static it is normal?

Someone knows this problem?☝

preda

sr. member

Activity: 756

Merit: 250

Quote from: Claymore on June 23, 2017, 08:16:30 AM

Quote from: Aquazi on June 22, 2017, 06:39:44 PM

Something I really dislike about your miner Claymore is the fact that if I'm dual mining ETC, when DevFee starts I lose another 30-40 seconds because it needs to swap to a different DAG and then after DevFee ends it changes again to a different DAG (132 on ETC 130 on ETH).
I really, really dislike it about your miner.
Just set an ETC pool for your devfee if mining ETC for christ sake, I understand you do a good job with your miners (you also make an awful lot of money, but it's cool anyway, it's deserved), but that's a long way from 1-2%, it's much closer to around 5% of lost hashrate each our with this dag swapping.

You can use pools that accept wallet address directly and remove "-allpools 1" option.

Quote from: simon66 on June 23, 2017, 12:46:07 AM

Hi Claymore,
Because of the AMD init bug (where cards are not initiated sequentially) the current miner version (9.5) is unable to know which card is which.
After looking at HWiNFO I noticed that each card has a DeviceInstanceId which doesn't change when I reboot my machine. Why can't I use that to target a OC on that card? Right now every time my machine reboot I have to manually OC each card (Kinda annoying).
Doesn't sound like an easy implementation but it doesn't hurt to ask

Miner cannot read DeviceInstanceId via OpenCL. But recently I finally found a way to match the OpenCL list of GPUs and the list of GPUs that is used in ADL for temperature/fans/OC management, it must help, I will try to put it in next update.
Also now I can enumerate GPUs as AfterBurner does.

Which is the way for?

preda

sr. member

Activity: 756

Merit: 250

Quote from: nils8107 on June 23, 2017, 05:24:40 AM

Quote from: preda on June 23, 2017, 03:44:16 AM

Quote from: ?? on ??

Quote from: weareken on June 22, 2017, 11:34:48 PM

Anyone using the MSI Z170-A Pro for more than 4 GPUs?

I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.

I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.

Any ideas?

i dont like Windows for mining... but
what psu do you have?
are gpus on stock settings?

I have that motherboard and i am mining with 6 gpu as well...
I remember i had to update the bios to the last version and enable the 4g decoding
I have to check when i go in the office for be sure.
But it run 6 gpu very good

I have the same Mainboard.
I run 7GPUs GTX 1070 on that.

Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfI

I have 4GB RAM, Windows 10 X64

I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT.

Oh yes i forgot you have to transform windows 10 in uefi mode gpt. If you have difficulty in this you can use aoemi partition assistant it will transform your mbr into gpt in 3 seconds without struggling....

I had to transform gpt hard drive and boot for all my rigs otherwise you won't be able to use more than 4 gpu

notbatman

legendary

Activity: 2212

Merit: 1038

Quote from: ?? on ??

Hi All

i have a problem...

i have asus rx 480 8gb (i think this is not the problem:)

the problem is...

asrock btc pro... 28.2mh 110W
"older" lenovo mobo 28.2mh 110w
but...
asrock fatal1ty h270 27.1mh 110W

same gpu, on all 3 mobo... why on fatal1ty 1mh lower? Huh

any ideas... thank you

bios is up to date.

noone has any idea?

noone similar problem???

boded bios update...
same card now.... 29.5mh 115w
on btc pro

on asrock fatality h270 28.4mh

why Huh

1MH/s lol, you probably have the monitor plugged into that card.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Aquazi on June 22, 2017, 06:39:44 PM

Something I really dislike about your miner Claymore is the fact that if I'm dual mining ETC, when DevFee starts I lose another 30-40 seconds because it needs to swap to a different DAG and then after DevFee ends it changes again to a different DAG (132 on ETC 130 on ETH).
I really, really dislike it about your miner.
Just set an ETC pool for your devfee if mining ETC for christ sake, I understand you do a good job with your miners (you also make an awful lot of money, but it's cool anyway, it's deserved), but that's a long way from 1-2%, it's much closer to around 5% of lost hashrate each our with this dag swapping.

You can use pools that accept wallet address directly and remove "-allpools 1" option.

Quote from: simon66 on June 23, 2017, 12:46:07 AM

Hi Claymore,
Because of the AMD init bug (where cards are not initiated sequentially) the current miner version (9.5) is unable to know which card is which.
After looking at HWiNFO I noticed that each card has a DeviceInstanceId which doesn't change when I reboot my machine. Why can't I use that to target a OC on that card? Right now every time my machine reboot I have to manually OC each card (Kinda annoying).
Doesn't sound like an easy implementation but it doesn't hurt to ask

Miner cannot read DeviceInstanceId via OpenCL. But recently I finally found a way to match the OpenCL list of GPUs and the list of GPUs that is used in ADL for temperature/fans/OC management, it must help, I will try to put it in next update.
Also now I can enumerate GPUs as AfterBurner does.

Gunna01

sr. member

Activity: 306

Merit: 251

Anyone else have an issue when switching into or out of dev mining?

Happen twice to me now where the miner hangs at entering or exiting dev mining? I'm only alerted due to the pool emailing me.

Provok

hero member

Activity: 1628

Merit: 583

Cryptopony

Claymore, can you add HMQ1725 algo to dual mode miner? Please! Coins with this algo looks perspective, I want to mine it with Ethereum.

nils8107

newbie

Activity: 22

Merit: 0

Quote from: preda on June 23, 2017, 03:44:16 AM

Quote from: ?? on ??

Quote from: weareken on June 22, 2017, 11:34:48 PM

Anyone using the MSI Z170-A Pro for more than 4 GPUs?

I've got mine set to Gen 1 and >4GB in the BIOS. All the cards show up fine and Claymore recognizes all of them, but when Claymore starts and gets to Create GPU Buffer on the last card (GPU0), the system hangs.

I'm on Win10 Anniversary with latest Nvidia drivers. I've got 4GB RAM installed and virtual memory set to 16GB (16384MB). These are all EVGA GTX 1060 SC 3GB Cards.

Any ideas?

i dont like Windows for mining... but
what psu do you have?
are gpus on stock settings?

I have that motherboard and i am mining with 6 gpu as well...
I remember i had to update the bios to the last version and enable the 4g decoding
I have to check when i go in the office for be sure.
But it run 6 gpu very good

I have the same Mainboard.
I run 7GPUs GTX 1070 on that.

Here a great Youtube Video about Bios settings https://www.youtube.com/watch?v=DR-FkpU2KfI

I have 4GB RAM, Windows 10 X64

I had some troubles. So I had to install Windows 10 in UEFI Modus with GPT.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 794. (Read 6590565 times)