Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 835.

Naughtis

member

Activity: 113

Merit: 100

Quote from: Tijuana on June 09, 2017, 07:05:09 AM

Quote from: PKBO on June 08, 2017, 06:14:33 PM

Quote from: Tijuana on June 08, 2017, 02:04:03 PM

I have a new setup on Windows 10 Pro and I'm getting terrible hashrates running 1070's. I have tried running 1 GPU and multiple GPUs with the same result. My other setup running the same Claymore settings runs fine, 28-29 Mh/s.

For some reason, the power consumption is only running about half of what it should be, and obviously temps indicate that the card isn't even trying.

Any suggestions? A few algorithms benchmark pretty slow in Nicehash, but some of them run at expected speeds (Lbry and Lyra primarily).

Windows 10 Pro, 8GB ram, 16GB pagefile
Asus Z270-AR
Intel Pentium G4560
Asus GTX 1070 Dual OC x 3 (directly plugged into MB)
378.78 drivers
Seasonic 750W

Try W7

I finally got it working last night. I had to update to the newest version of Windows 10, which did not update automatically. I downloaded 1703 and magically everything is normal.

Can you disable the autoupdate?

Tijuana

newbie

Activity: 3

Merit: 0

Quote from: PKBO on June 08, 2017, 06:14:33 PM

Quote from: Tijuana on June 08, 2017, 02:04:03 PM

I have a new setup on Windows 10 Pro and I'm getting terrible hashrates running 1070's. I have tried running 1 GPU and multiple GPUs with the same result. My other setup running the same Claymore settings runs fine, 28-29 Mh/s.
https://i.imgur.com/pHZTxR2.jpg

For some reason, the power consumption is only running about half of what it should be, and obviously temps indicate that the card isn't even trying.
https://i.imgur.com/M6vIlvI.jpg

Any suggestions? A few algorithms benchmark pretty slow in Nicehash, but some of them run at expected speeds (Lbry and Lyra primarily).

Windows 10 Pro, 8GB ram, 16GB pagefile
Asus Z270-AR
Intel Pentium G4560
Asus GTX 1070 Dual OC x 3 (directly plugged into MB)
378.78 drivers
Seasonic 750W

Try W7

I finally got it working last night. I had to update to the newest version of Windows 10, which did not update automatically. I downloaded 1703 and magically everything is normal.

Guaika_caracas

newbie

Activity: 2

Merit: 0

Quote from: citronick on June 09, 2017, 01:09:01 AM

Quote from: Guaika_caracas on June 09, 2017, 12:31:22 AM

I greet everyone, very interesting information they exchange in the forum. My query is if I can use in the same rigs to mine, the radeon rx 460 and the nvidia gtx 1050ti.

Thank you.
Huh

the answer is yes, Claymore miner will recognize both AMD and NVIDIA cards.

btw, what ETH MHs are you getting for 1050ti ?

I do not know, is that the technical characteristics are similar to those of radeon rx 460, is there any place where you can investigate the MH / s it generates?

ffthomas

full member

Activity: 160

Merit: 100

@claymore: Sir, maybe I found a bug. If I start Ethman and there is any temperature or fan speed warning, then Ethman doesn't show any info about that rig, only rig name and IP:port. (If the warning "happens" later, there is no problem.)

Vann

hero member

Activity: 1036

Merit: 606

Quote from: avirdoz on June 09, 2017, 04:29:16 AM

Guys, can someone tell which version of amd driver from 17.x branch works with modded bios (don't check signature)?

I have RX 580/480 and use the latest 17.5.2 drivers. You have to use the pixel patcher to disable the Bios signature check any time you install the drivers.

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

avirdoz

legendary

Activity: 1191

Merit: 1001

Guys, can someone tell which version of amd driver from 17.x branch works with modded bios (don't check signature)?

ffthomas

full member

Activity: 160

Merit: 100

Quote from: maxpowerzz92 on June 08, 2017, 02:45:15 PM

Quote from: ffthomas on June 08, 2017, 02:36:48 PM

Guys, did you experience that if you restart the miner from Ethman in the most cases (8 from 10 times) the miner freeze/crash on the rig? Is it a known bug or I'm the lame?

I don't know if any of you guys use Awesome Miner to manage your rigs, but it works great especially if you mine with NiceHash.

New release seems to be working fine for me. Not getting much of a performance improvement but stability seems fine for my rigs. Running R9 290 and 290x's.

I don't use Nicehash, I mine directly with Claymore's dual miner.

morsus

newbie

Activity: 11

Merit: 0

Quote from: morsus on June 08, 2017, 02:29:51 PM

Hello.

Im minning with 6x KFA2 Geforce 1060. Windows 10 x64, and maximum mh's i get is 2.5 at the moment.. Zec and other coins are 280 sols. I want to know whats the trick, or why im getting so bad results on eth? Anybody have same problem?

Any thoughts?

Does anyone have same problems?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: marcodacorte on June 08, 2017, 04:01:14 PM

hello, Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.5 bug, not connet servers ethermine pool

Bug is somewhere else

Please open ethermine.org in browser and read "How to Connect" help section, there is no "-esm 2" option there...

Quote from: gateway on June 08, 2017, 06:17:18 PM

Anyone having issues when the miner reboots due to a GPU having an open cl issue?
From time to time this happens and when the miner is restarted automatically its stuck at doing dags or something and never gets mining again..
I have noticed when I kill the actual window in windows and click the bat file again it works.
@Claymore is their a way for it to completely kill the window and wait a few secs before launching again. I believe on some hangs this would help out.

1. Often when OpenCL fails, you have to reboot the system, not just restart miner. Sometimes even soft reboot won't work and you have to press Reset button. It is because the fail is at drivers level, Windows does not like such things and drivers too.
2. Miner cannot kill itself, then wait a few seconds and start itself again. Because it needs to be running to start anything. But you can create some .BAT file for it, for example, you can wait and start miner again in reboot.bat if you use "-r 1" option.

Teress

full member

Activity: 224

Merit: 102

Quote from: Guaika_caracas on June 09, 2017, 12:31:22 AM

I greet everyone, very interesting information they exchange in the forum. My query is if I can use in the same rigs to mine, the radeon rx 460 and the nvidia gtx 1050ti.

Thank you.
Huh

yes you can

lautre

jr. member

Activity: 45

Merit: 1

thx for ethman update, if anyone need this i'm using twitter for alerts since a while, my .bat:

Quote

@ECHO OFF
IF "%2"=="1" (
Set pb=☠️
)
IF "%2"=="2" (
Set pb=🔥
)
IF "%2"=="3" (
Set pb=📉
)
IF "%2"=="4" (
Set pb=🛠️
)
IF "%2"=="" (
Set pb=👽⁉
)
ECHO %TIME:~0,5% %1: %pb% | tweet
timeout /t 10

i use node-tweet-cli

vogonpoetry

newbie

Activity: 10

Merit: 0

Quote from: ne0x86 on June 09, 2017, 12:29:49 AM

Hi guys,

I just trying to mining dual eth+sc with my gtx 1060 and I got about 20 mh/s and 130mh/s.

Eth mining speed is normal, but is SC speed normal? I think its very low, whattomine say 990 mh/s

Thanks

You won't get full mining speed for the second coin when dual mining. If you want full SC speed, use a solominer.

That said, you can maximize your efficiency by playing with the -/+ keys in the runtime which will change your -dcri value. Hit "S" for stats and you can find your best ratio.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Guaika_caracas on June 09, 2017, 12:31:22 AM

I greet everyone, very interesting information they exchange in the forum. My query is if I can use in the same rigs to mine, the radeon rx 460 and the nvidia gtx 1050ti.

Thank you.
Huh

the answer is yes, Claymore miner will recognize both AMD and NVIDIA cards.

btw, what ETH MHs are you getting for 1050ti ?

Guaika_caracas

newbie

Activity: 2

Merit: 0

I greet everyone, very interesting information they exchange in the forum. My query is if I can use in the same rigs to mine, the radeon rx 460 and the nvidia gtx 1050ti.

Thank you.
Huh

ne0x86

newbie

Activity: 81

Merit: 0

Hi guys,

I just trying to mining dual eth+sc with my gtx 1060 and I got about 20 mh/s and 130mh/s.

Eth mining speed is normal, but is SC speed normal? I think its very low, whattomine say 990 mh/s

Thanks

QuadraQ

sr. member

Activity: 480

Merit: 250

I just bought an AMD RX 580 for mining purposes, but I can't get Windows to recognize the video card! I'm running Windows 8.1 because Windows 10 will just force restart your PC with updates which makes it unsuitable for a mining rig. But I noticed that AMD doesn't have a driver for Windows 8.1, just for Windows 7/10. I downloaded and installed the latest Catalyst for Windows 7 and it installed fine, but my video card still doesn't show up under windows. Has anyone else gotten an RX 5xx card working with Windows 8.1?

Trooper

newbie

Activity: 1

Merit: 0

Quote from: 2econd on June 08, 2017, 06:18:43 PM

So Claymore is the only dual miner available? 2 percent fee is a joke, so I kind of wish to get rid of it. This guy is richer than Richie Rich, little reason for him not to make it 1 or even 0,5%
I can't stand moguls, raised by hippies, so I rather lose 1%, than support a selfish person 2%

But hey if there is another dual miner that would be great.

This is Claymore's forum, not the best place to complain. You won't get much support in this thread.
Just sayin.

rampage999

newbie

Activity: 45

Merit: 0

Thanks for the great work! Always love it.

Question:

It seems while dual mining Sia coin Blake (2b), the hashrate of Ethereum(ETH) will drop for around 17%,
compared to dual mining Decred Blake (14r) there's no drop on Ethereum(ETH) hashrate, is this expected behavior?

Tested on Linux/Windows with different rigs, all have this issue.

Cheers,

2econd

full member

Activity: 243

Merit: 100

So Claymore is the only dual miner available? 2 percent fee is a joke, so I kind of wish to get rid of it. This guy is richer than Richie Rich, little reason for him not to make it 1 or even 0,5%
I can't stand moguls, raised by hippies, so I rather lose 1%, than support a selfish person 2%

But hey if there is another dual miner that would be great.

gateway

hero member

Activity: 552

Merit: 500

Anyone having issues when the miner reboots due to a GPU having an open cl issue?

From time to time this happens and when the miner is restarted automatically its stuck at doing dags or something and never gets mining again..

After my last reboot my last log file was this and it never moved forward.

Code:

14:04:39:433 b58 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
14:04:39:433 b58 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.4 º
14:04:39:433 b58 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ¼
14:04:39:433 b58
14:04:39:687 b58 ETH: 1 pool is specified
14:04:39:718 b58 Main Ethereum pool is us1-etc.ethermine.org:4444
14:04:39:847 b58 DCR: 1 pool is specified
14:04:39:995 b58 Main Decred pool is dcr.suprnova.cc:3252
14:04:41:468 b58 OpenCL platform: AMD Accelerated Parallel Processing
14:04:41:472 b58 OpenCL initializing...

14:04:41:475 b58 AMD Cards available: 5
14:04:41:479 b58 GPU #0: Ellesmere, 4096 MB available, 36 compute units
14:04:41:482 b58 GPU #0 recognized as Radeon RX 480/580
14:04:41:485 b58 GPU #1: Ellesmere, 4096 MB available, 36 compute units
14:04:41:488 b58 GPU #1 recognized as Radeon RX 480/580
14:04:41:492 b58 GPU #2: Ellesmere, 4096 MB available, 36 compute units
14:04:41:496 b58 GPU #2 recognized as Radeon RX 480/580
14:04:41:499 b58 GPU #3: Ellesmere, 4096 MB available, 36 compute units
14:04:41:502 b58 GPU #3 recognized as Radeon RX 480/580
14:04:41:506 b58 GPU #4: Ellesmere, 4096 MB available, 36 compute units
14:04:41:512 b58 GPU #4 recognized as Radeon RX 480/580
14:04:41:515 b58 POOL/SOLO version
14:04:41:518 b58 b345
14:04:41:521 b58 Platform: Windows
14:04:41:546 b58 start building OpenCL program for GPU 0...
14:04:41:826 b58 done
14:04:42:046 b58 start building OpenCL program for GPU 1...
14:04:42:312 b58 done
14:04:42:534 b58 start building OpenCL program for GPU 2...
14:04:42:806 b58 done
14:04:43:032 b58 start building OpenCL program for GPU 3...

I have noticed when I kill the actual window in windows and click the bat file again it works.

@Claymore is their a way for it to completely kill the window and wait a few secs before launching again. I believe on some hangs this would help out.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 835. (Read 6590718 times)