Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 837.

Azateq

newbie

Activity: 14

Merit: 0

Quote from: cloudp on June 08, 2017, 09:12:48 AM

Im mining on a 1070 and 2 480s. Trying to do ETH+SC on nanopool.

I have dcri 30 on my 1070 ~30Mh/s ETH and ~290Mh/s SC
I have dcri 8 on my 480 8gb ~30Mh/s and ~240Mh/s SC

Are these in line or can I be doing more. I really want to focus on ETH. SC as a bonus.

what settings on this 1070?

ozzy1926

sr. member

Activity: 378

Merit: 250

When i set benchmark mode I get 23mh/s from each card but when I run the miner I get 22mh/s from 1st and 19mh/s from 2nd. How to find the best setting?(nvidia)

XManiac

newbie

Activity: 26

Merit: 0

Anyone know why on ethermine.org my miner's ID have being changed? At start it was a Polonex wallet but now i dont know why it shows another ID.
ethermine.org/miners/0x0dd8bac9a67f901...... but ID is Miner: 0dd8bac9a67f90120.......

KaydenC

sr. member

Activity: 610

Merit: 265

Quote from: cloudp on June 08, 2017, 09:12:48 AM

Im mining on a 1070 and 2 480s. Trying to do ETH+SC on nanopool.

I have dcri 30 on my 1070 ~30Mh/s ETH and ~290Mh/s SC
I have dcri 8 on my 480 8gb ~30Mh/s and ~240Mh/s SC

Are these in line or can I be doing more. I really want to focus on ETH. SC as a bonus.

You may try dcri 15-20 for Rx480. Should be able to do at least 500Mh/s on SC before eth hash rate is impacted.
30Mh/s is pretty much in line for eth mining.

cloudp

newbie

Activity: 14

Merit: 0

Im mining on a 1070 and 2 480s. Trying to do ETH+SC on nanopool.

I have dcri 30 on my 1070 ~30Mh/s ETH and ~290Mh/s SC
I have dcri 8 on my 480 8gb ~30Mh/s and ~240Mh/s SC

Are these in line or can I be doing more. I really want to focus on ETH. SC as a bonus.

notbatman

legendary

Activity: 2212

Merit: 1038

Lol, microsloth treats miner code as a virus sometimes due to problems with botnets. Clay may want to fish out any cpu mining code if it's not really used much.

sofianeelec

newbie

Activity: 22

Merit: 0

virus

sofianeelec

newbie

Activity: 22

Merit: 0

Quote from: Claymore on April 11, 2016, 10:51:50 AM

Quote from: blastbob on April 11, 2016, 10:39:25 AM

My antivirus removed the file as soon as it was available.

So ill keep off until some more comments are available

I pack my miners to prevent disassembling. Some paranoid antiviruses treats any packer as a virus. I'm trying to fix it, but not sure that it is possible for all antiviruses.
If you think that I write viruses - do not use this miner.

ofcurse we do not use it Latest version is v9.5 is virus,

If you want quick profit you will not succeed

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: freak1 on June 08, 2017, 01:10:49 AM

How do i get the settings from ethman from 9.4 to 9.5? So i don't have to type all in again.

Just copy "Options.ini" file.

preda

sr. member

Activity: 756

Merit: 250

Quote from: freak1 on June 08, 2017, 06:27:49 AM

Quote from: preda on June 08, 2017, 02:01:27 AM

Quote from: freak1 on June 08, 2017, 01:10:49 AM

How do i get the settings from ethman from 9.4 to 9.5? So i don't have to type all in again.

Setting?

I just copy and paste the .bat file created

ethman not ethminer, the remote manager.

Ops, sorry my bad i read it wrong

freak1

newbie

Activity: 47

Merit: 0

Quote from: preda on June 08, 2017, 02:01:27 AM

Quote from: freak1 on June 08, 2017, 01:10:49 AM

How do i get the settings from ethman from 9.4 to 9.5? So i don't have to type all in again.

Setting?

I just copy and paste the .bat file created

ethman not ethminer, the remote manager.

lsszmeja

newbie

Activity: 13

Merit: 0

Hi all,

Current setup
Win 10, 8gb ram, 16gb virtual
1300w psu
7x rx580s 8gb
msi z170 m5 mobo (bios settings: gen 1 pci, decoding enabled, hd audio disabled

my issue:

Code:

02:42:46:879 544 Setting DAG epoch #127 for GPU3
02:42:46:880 1ba4 Setting DAG epoch #127 for GPU6
02:42:46:880 ea4 Setting DAG epoch #127 for GPU0
02:42:46:881 1af8 Setting DAG epoch #127 for GPU5
02:42:46:880 544 Create GPU buffer for GPU3
02:42:46:878 7cc Setting DAG epoch #127 for GPU4
02:42:46:882 ea4 Create GPU buffer for GPU0
02:42:46:882 1ba4 Create GPU buffer for GPU6
02:42:46:885 7ac Setting DAG epoch #127 for GPU1
02:42:46:891 1b80 Setting DAG epoch #127 for GPU2
02:42:46:893 1b80 Create GPU buffer for GPU2
02:42:46:892 7cc Create GPU buffer for GPU4
02:42:46:892 1af8 Create GPU buffer for GPU5
02:42:46:900 7ac Create GPU buffer for GPU1
02:42:47:126 1af8 GPU5, OpenCL error -4 (0) - cannot create DAG on GPU

02:42:47:182 1b80 GPU2, OpenCL error -4 (0) - cannot create DAG on GPU

02:42:50:127 1af8 Set global fail flag, failed GPU5
02:42:50:127 7e4 Setting DAG epoch #127 for GPU5
02:42:50:130 1af8 GPU 5 failed
02:42:50:183 1b80 Set global fail flag, failed GPU2
02:42:50:183 568 Setting DAG epoch #127 for GPU2
02:42:50:184 1b80 GPU 2 failed
02:42:50:293 7e4 GPU5, OpenCL error -4 (0) - cannot create DAG on GPU

02:42:50:405 568 GPU2, OpenCL error -4 (0) - cannot create DAG on GPU

this only happens on 2 gpus

any help would be appreciated

Edit: Sorted, Adjusted Virtual memory up to 18gb and also removed cortana and seemed to fix it

nosdi26

full member

Activity: 199

Merit: 100

HI, im using win 10 x64,550 w psu corsair, 9 gb RAM, a sapphire 6950 2 gb card with 15,7 drivers and i cant make it work,,the miner causes the pc to restart after 2 minutes,,i want to mine monero,, any suggestion? thanks in advance

Bob_chemist

newbie

Activity: 28

Merit: 0

Claymore, thanx for update.
But I found 1 issue: if I copy options.ini from EthMan ver 2.9 to 3.0 (or 3.1), it looks working for the first sight. But when trying to close, it opens a window:
"cannot save file c:\rem_man\options_temp.ini. Make sure you have rights to create/write this file."

"Run as administrator" doesnt affect.

Check this please, or make an import of options.ini from old versions of EthMan.

Fixed. That was an antivirus

XxsmasxX

newbie

Activity: 76

Merit: 0

Windows 10 reports "file corrupted this program has been manipulated and maybe it is infected by a virus or cracked." Mining in Windows 10, Miner files allocated in the dropbox folder, how can I solve this problem? URGENT

24core

sr. member

Activity: 582

Merit: 250

An Impressive Purely Anonymous Currency.

When I push my 580'x too hard I get a small number of GPU memory errors reported in HWINFO.

Considering the 29.4MH/s is this acceptable losses and will it cause long term damage ?

24core

sr. member

Activity: 582

Merit: 250

An Impressive Purely Anonymous Currency.

Quote from: ?? on ??

Does anyone also have crashing problem using Claymore to set voltage? i have windows 10 using the modified driver to support 6 GPU (4x580, 1x570, 1x470). When I use Afterburner to control voltage, it worked perfectly fine. When I use Claymore to control voltage (Afterburner restored default), even at exact same voltage (1.0), it crashes after about 3 minutes of mining. When can I do to bring down the voltage further?

Use GPU-Z to check what voltage is being set and maybe uninstall Afterburner.

24core

sr. member

Activity: 582

Merit: 250

An Impressive Purely Anonymous Currency.

Hi everyone,

I have noticed something really odd with my riggs. I have a mixture of motherboards and 580X's. When I start Claymore Dual miner through remote desktop it only configures one of the cards but all cards mine. If I reboot the machine and then log in, after the miner has started, all is fine. Seems to be something to do with Remote desktop. Has anyone seen this problem or/and know some tricks to fix ?

preda

sr. member

Activity: 756

Merit: 250

Quote from: freak1 on June 08, 2017, 01:10:49 AM

How do i get the settings from ethman from 9.4 to 9.5? So i don't have to type all in again.

Setting?

I just copy and paste the .bat file created

preda

sr. member

Activity: 756

Merit: 250

Quote from: valev1 on June 08, 2017, 01:38:07 AM

Quote from: preda on June 07, 2017, 05:56:50 PM

i am trying 9.5 claymore

6x 1060 3gb mining constantly 23.3 mh
6x 1060 3gb mining gpu0 20mh others 23.3 why the gpu0 lose hashrate?

23.3 Mh with moded BIOS, OC or stock ?

if possible send OC settings

Geforce no need to struggle with bios...

Just install the card open msi afterburner set tdp 60% core +145/170 memory +900/950
You will get 23.5 perfectly stable

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 837. (Read 6590718 times)