@Claymore
The miner doesn't apply -cvddc less than 900mv on my RX570
-cvddc 880 applies the same voltage as -cvddc 900
Is it by design? I could still knock some watts down if it allowed me to.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 864. (Read 6590565 times)
May 27, 2017, 03:20:11 PM
May 27, 2017, 02:56:55 PM
hi all experts,
i noticed that when i mine with ethermine pool, there is:
1) DevFee: ETH: Stratum - Connected (eu1.ethermine.org:14444)
2) DevFee: start mining
3) DevFee: ETH: checking pool connection...
4) DevFee: stop mining and disconnect
What does the devfee above means?
But when i mine alpereum for past 12 days, there is no "devfee" in any of the log.
could some one enlighten me?
thank you.
by the way, i am using windows 10 with 1 GPU 7950 only.
That happens on every pool and is normal. That is the fee claymore takes for using his miner. See the first post on page 1. i noticed that when i mine with ethermine pool, there is:
1) DevFee: ETH: Stratum - Connected (eu1.ethermine.org:14444)
2) DevFee: start mining
3) DevFee: ETH: checking pool connection...
4) DevFee: stop mining and disconnect
What does the devfee above means?
But when i mine alpereum for past 12 days, there is no "devfee" in any of the log.
could some one enlighten me?
thank you.
by the way, i am using windows 10 with 1 GPU 7950 only.
May 27, 2017, 02:55:41 PM
Whats about "dual" mining on Nvidia and AMD cards at the same time? Is it possible?
And if anyone have GTX980, how much mh/s it has?
And if anyone have GTX980, how much mh/s it has?
My gigabyte 980 does about 21.3 & my evga 980 does about 21.6..i also have a evga 980 ti doing about 23.5. Theyre all mining eth only.
May 27, 2017, 02:49:20 PM
Whats about "dual" mining on Nvidia and AMD cards at the same time? Is it possible?
And if anyone have GTX980, how much mh/s it has?
And if anyone have GTX980, how much mh/s it has?
My gigabyte 980 does about 21.3 & my evga 980 does about 21.6..i also have a evga 980 ti doing about 23.5. Theyre all mining eth only.
May 27, 2017, 02:40:43 PM
you can use amd and nvidia on same rig and mine eth and zec
I want to mine ETH on NV and AMD at the same time. For ex. GTX970 and RX470. Is it possible? 
May 27, 2017, 02:35:34 PM
Whats about "dual" mining on Nvidia and AMD cards at the same time? Is it possible?
And if anyone have GTX980, how much mh/s it has?
you can use amd and nvidia on same rig and mine eth and zec And if anyone have GTX980, how much mh/s it has?
May 27, 2017, 02:33:22 PM
Whats about "dual" mining on Nvidia and AMD cards at the same time? Is it possible?
And if anyone have GTX980, how much mh/s it has?
And if anyone have GTX980, how much mh/s it has?
May 27, 2017, 02:17:36 PM
Dwarfpool main website has been down for over 12 hours. Still sending work to my miner though. Should I be worried?
First off, why are you posting this question in the Claymore mining thread? There are plenty of other threads discussing the issues Dwarfpool is currently having.
Secondly, why are you asking a bunch of Internet strangers what to do? Be you own man and take action! If you are worried enough to make a post about it you should be worried enough to move to a different pool until the issues are resolved.
May 27, 2017, 11:27:05 AM
Hi, just started using Claymore on new Sapphire RX580 Nitro 8gb cards
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
do not use RDP, read manualThe first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
I have had nothing but problems cloning rigs this way. Every one I have used a copied HDD on I have needed to at least do a fresh driver install. I had weird problems like only 3 cards showing or like you have, incorrect or no fan control / temp reading 0.
I don't think it's the rx 580.
What program are you using to clone the HDD?
I've used clonezilla multiple times to clone rigs' HDD's & never had an issue.
May 27, 2017, 10:24:43 AM
Hi Claymore
Thanks for your work
Would you mind adding fan % alarm like temperature? (ie if fan goes faster than 90% run script...)
It could be usefull as summer is coming
and passing to alert script the failing miner name in argument could also be very usefull
What do u think?
Thanks for your work
Would you mind adding fan % alarm like temperature? (ie if fan goes faster than 90% run script...)
It could be usefull as summer is coming
and passing to alert script the failing miner name in argument could also be very usefull
What do u think?
May 27, 2017, 08:21:19 AM
Hi, just started using Claymore on new Sapphire RX580 Nitro 8gb cards
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
do not use RDP, read manualThe first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
I have had nothing but problems cloning rigs this way. Every one I have used a copied HDD on I have needed to at least do a fresh driver install. I had weird problems like only 3 cards showing or like you have, incorrect or no fan control / temp reading 0.
I don't think it's the rx 580.
May 27, 2017, 07:29:27 AM
Hi, just started using Claymore on new Sapphire RX580 Nitro 8gb cards
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
try not use RDP, read manual The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
May 27, 2017, 06:44:37 AM
Hi, just started using Claymore on new Sapphire RX580 Nitro 8gb cards
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
The first rig everything worked fine. new w10 only / no drivers. Installed claymore 9.4 - only using start.bat
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool asia1.ethermine.org:4444 -ewal myaccountname.BC1 -epsw x
GPU temp and fan speed is displayed every 5 seconds in red.
I cloned the SSD for a new 2nd rig (identical hardware)
ran start.bat and mines fine, but there is no temp/fan speed. I tried adding -tt 1 or -tt 60 to the bat to no avail. I also tried Sapphire Trixx (no temp displayed) and GPU-Z (also no temp displayed).
I cloned to a 3rd new rig (identical hardware), and same issue.
Anyone else using RX580 having similar issue?
May 27, 2017, 06:19:15 AM
it's only me or there is problems with the latest ethman? it lose connection to rig even if the rig is still up and mining..
I agree, same problem to me. I set -mpsw option and use new ETHMan 3.0, in ethman I set passwords to all rigs with "Apply to all" button, ETHMAN works good but at some point all rigs go offline. If i restart ETHMan all rigs will be okay in the same second. I looks like if one rig goes down ETH man 3.0 may loose connection to all other rigs but it is not 100%the problem exists on all rigs where I tryed to run ETHMan 3.0 (windows 7 x32 home, windows 7 x64 ultimate)
*I use non standart port numbers for my rigs.
May 27, 2017, 06:16:29 AM
Dwarfpool main website has been down for over 12 hours. Still sending work to my miner though. Should I be worried?
May 27, 2017, 04:22:49 AM
Hi all
I`m new here.
I downloaded "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.4"
And I added in my Config File my -ewal my key.
Otherwise I did nothing.
I have a GTX1080 and a GTX970 and a I7 7700k and 16GB RAM.
Then I run start file...
https://www2.pic-upload.de/img/33232144/mining2.jpg
Why its still calculating DCR?
Any tips for me? Thank you so much in advance.
I`m new here.
I downloaded "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.4"
And I added in my Config File my -ewal my key.
Code:
# WARNING! Remove "#" characters to enable lines, with "#" they are disabled and will be ignored by miner! Check README for details.
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-[b]mode 1[/b] I only want ETH mining...
-epool us1.ethpool.org:3333
-ewal [b]da4fd02b79e1f3cebbf581786f1a2e174ee931f9[/b] my key
-epsw x
# WARNING! Miner loads options from this file only if there are not any options in the command line!
-[b]mode 1[/b] I only want ETH mining...
-epool us1.ethpool.org:3333
-ewal [b]da4fd02b79e1f3cebbf581786f1a2e174ee931f9[/b] my key
-epsw x
Otherwise I did nothing.
I have a GTX1080 and a GTX970 and a I7 7700k and 16GB RAM.
Then I run start file...
https://www2.pic-upload.de/img/33232144/mining2.jpg
Why its still calculating DCR?
Any tips for me? Thank you so much in advance.
Remove the text formating and comments.
Thank you.
So I edit the START file like this:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xdA4Fd02b79e1F3CEBBF581786f1a2E174ee9XXXX.myname -epsw x -mode 1
Now it works.
But my GPU0 makes 23Mh/s and my GPU 1 3.0Mh/s
I have a GTX 1080 and GTX 970 (not SLI connected).
Any Ideas why its so slow the second GPU?
May 27, 2017, 03:53:29 AM
My latest stats:
AMD Worker:
1x570 - 23.4-23.9mh/s - Powerlimit -30% Mem 1905 - Temp 58C - Without powerlimit 74C
2x580 - 23.4-23.9mh/s - Powerlimit -30% Mem 1905 - Temp 58C - Without powerlimit 73C
Nvidia GTX1080 - -40% power 24mh/s
Nvidia GTX1060 - -40% power 21.8-22mh/s
https://www.upload.ee/image/7050613/stats.png
AMD Worker:
1x570 - 23.4-23.9mh/s - Powerlimit -30% Mem 1905 - Temp 58C - Without powerlimit 74C
2x580 - 23.4-23.9mh/s - Powerlimit -30% Mem 1905 - Temp 58C - Without powerlimit 73C
Nvidia GTX1080 - -40% power 24mh/s
Nvidia GTX1060 - -40% power 21.8-22mh/s
https://www.upload.ee/image/7050613/stats.png
May 27, 2017, 03:09:43 AM
hi all experts,
i noticed that when i mine with ethermine pool, there is:
1) DevFee: ETH: Stratum - Connected (eu1.ethermine.org:14444)
2) DevFee: start mining
3) DevFee: ETH: checking pool connection...
4) DevFee: stop mining and disconnect
What does the devfee above means?
But when i mine alpereum for past 12 days, there is no "devfee" in any of the log.
could some one enlighten me?
thank you.
by the way, i am using windows 10 with 1 GPU 7950 only.
i noticed that when i mine with ethermine pool, there is:
1) DevFee: ETH: Stratum - Connected (eu1.ethermine.org:14444)
2) DevFee: start mining
3) DevFee: ETH: checking pool connection...
4) DevFee: stop mining and disconnect
What does the devfee above means?
But when i mine alpereum for past 12 days, there is no "devfee" in any of the log.
could some one enlighten me?
thank you.
by the way, i am using windows 10 with 1 GPU 7950 only.
May 27, 2017, 01:03:24 AM
I have developed a miner monitoring for Claymore's Dual etherum miners with SMS support.
If anybody interested for beta testing, let me know.
Some pictures of the system:
If anybody interested for beta testing, let me know.
Some pictures of the system:
It`s great
this bet way for monitoring my rigs
How can I test it?
https://bitcointalksearch.org/topic/ethmonitoring-ethcontrol-ewbf-claymores-ccminer-antminer-androidios-1932864
May 27, 2017, 12:55:56 AM
it's only me or there is problems with the latest ethman? it lose connection to rig even if the rig is still up and mining..
Check if you have the same ip for the rig in the moment of disconnection. Some mobile internet providers change the ip on the go. Jump to: