Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 867.

OverEasy

sr. member

Activity: 301

Merit: 251

Quote from: ryderbg on May 25, 2017, 02:17:25 PM

Quote from: vapourminer on May 25, 2017, 12:56:38 PM

Quote from: ryderbg on May 25, 2017, 12:22:57 PM

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

Tried but not working. Also tried "Sc", "Sia", "sia", "Siacoin" and "siacoin".

I think I read somewhere you have to wait for version 2 of NH miner for SIA

ryderbg

newbie

Activity: 7

Merit: 0

Quote from: vapourminer on May 25, 2017, 12:56:38 PM

Quote from: ryderbg on May 25, 2017, 12:22:57 PM

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

Tried but not working. Also tried "Sc", "Sia", "sia", "Siacoin" and "siacoin".

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: ryderbg on May 25, 2017, 12:22:57 PM

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

use "sc" instead of "siacoin"

alrami

member

Activity: 92

Merit: 10

Good time for all

What swap must be set for 1070 cards?
i have 4 card rig 980 + 3x1070
Dual miner can work with any 2 cards from a rig
if more, i see a mistake like "CUDA error, can't allocate big bufer for DAG"

Win7x64 Claymore 9.3
swap 16-32-64 = same

ryderbg

newbie

Activity: 7

Merit: 0

Anyone knows how to mine ETH+SC with Nicehash miner? I know ETH+PASC command is "-dual=Pascal" but "-dual=Siacoin" doesn't work.

Vaslime

member

Activity: 141

Merit: 10

Cryptotalk.org

Quote from: PabloW on May 25, 2017, 11:28:44 AM

Quote from: miner417 on May 25, 2017, 08:18:18 AM

Quote from: PabloW on May 25, 2017, 08:05:03 AM

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

[ximg]https://i.imgur.com/6yMwR8P.png[/ximg]

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

Ok thank you!

I want to buy 2 or 3 cards to mine on my own pc. I see everyones buying AMD 470 4GB cards, but I would like something more powerfull since I'm not buying 5 or 6 cards. Would you recommend anything specific?

Thanks again!

The 470 is almost as powerful as the 480.

PabloW

full member

Activity: 228

Merit: 106

Quote from: miner417 on May 25, 2017, 08:18:18 AM

Quote from: PabloW on May 25, 2017, 08:05:03 AM

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

[ximg]https://i.imgur.com/6yMwR8P.png[/ximg]

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

Ok thank you!

I want to buy 2 or 3 cards to mine on my own pc. I see everyones buying AMD 470 4GB cards, but I would like something more powerfull since I'm not buying 5 or 6 cards. Would you recommend anything specific?

Thanks again!

alnemer

newbie

Activity: 17

Merit: 0

Quote from: Nokia555 on May 25, 2017, 07:06:58 AM

I have developed a miner monitoring for Claymore's Dual etherum miners with SMS support.

If anybody interested for beta testing, let me know.

Some pictures of the system:

https://www.upload.ee/image/7044728/miners_list.png
https://www.upload.ee/image/7044734/notification_list.png
https://www.upload.ee/image/7044730/ethMonitor.png

It`s great

this bet way for monitoring my rigs

How can I test it?

Shnikes101

full member

Activity: 254

Merit: 109

Looking for some guidance. Was running fine for a week and started having issues.

It appears I can't hold a connection to either the servers or the stratum? It will bounce around servers looking for a stable connection but constantly drop. The gpu's run and my hash rate is about what I would expect.

Types of error seen:

ETH: Connection lost, retry in 20 sec...
Cannot resolve eth-us-east1.nanopool.org
ETH: Stratum - Cannot connect to eth-us-esat1.nanopoool.org:9999
ETH : Stratum - Failed to connect, retry in 20 sec...
Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
ETH: Received Error :{"jsonrpc" : "2.0", "id" :4, "error" : {"code" ; -32700, "message" : "Worknotfound"}}

The last one feels odd?> Any thoughts?

I do have another miner that uses the same settings and runs fine.

OverEasy

sr. member

Activity: 301

Merit: 251

I am getting errors on all rigs when mining SIA on Nicehash with new Claymore 9.4
Every few minutes I get the following error

This is my .bat file (address removed)

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -dcoin sia -dcri 13 -dbg -1 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal someaddress.rig1 -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://sia.usa.nicehash.com:3360 -dwal someaddress.rig1

Any help is appreciated.Thanks

miner417

member

Activity: 84

Merit: 10

Quote from: PabloW on May 25, 2017, 08:05:03 AM

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

I'll appreciate any help you can give me!

Thanks

To mine eth you need at least 3 GB of ram on the card. That card can't mine eth at all.

wtfonly16

full member

Activity: 285

Merit: 105

works up until the moment i unplug monitor, any fix ?

PabloW

full member

Activity: 228

Merit: 106

Hello! I'm trying to mine with my MSI 6850. Is this card supported with this miner? if not, is there any other miner I could use?
I already downloaded the catalyst update and updated my drivers, so that should be fine.

This is the error I am getting:

Also when I put these in the config file, the miner doesn't load it. Should I put these anywhere else? i also tried putting setx before all of these.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This is how my config.txt looks like:

-epool eth.suprnova.cc:5005
-ewal pablow.placa6850
-epsw X
-dpool dcr.suprnova.cc:3252
-dwal pablow.placa6850
-dpsw X
-allpools 1
#-esm 1
#-mode 0
#-tt 70
#-asm 0

I'll appreciate any help you can give me!

Thanks

ManyMan

newbie

Activity: 39

Merit: 0

Quote from: zorvalth on May 25, 2017, 04:51:07 AM

Quote from: Claymore on May 25, 2017, 04:27:16 AM

Quote from: zorvalth on May 25, 2017, 01:57:12 AM

How does -mpsw works? I thought it should be -mpsw password and then set it in the remote manager , but its not like that..

Exactly, set "-mpsw xxxxx" in miner, then set same password in EthMan in the miner properties, that is all.

Yep the problem was i didnt set it in ethman.

Another question, I setn gmail smtp and i get "Could not load SSL library", any fix?

Yes, same problem.

Nokia555

sr. member

Activity: 392

Merit: 266

EthMonitoring.com

I have developed a miner monitoring for Claymore's Dual etherum miners with SMS support.

If anybody interested for beta testing, let me know.

Some pictures of the system:

zenhaeus

newbie

Activity: 2

Merit: 0

Quote from: supertux1 on May 24, 2017, 09:21:02 PM

Quote from: zenhaeus on May 24, 2017, 04:32:51 PM

Hello,

I'm trying to dualmine Ethereum and Siacoin on my GTX 970. It seems to work on the Siacoin side of things, and according to the output it also mines Ethereum, but my Ethereum pool does not see my worker. I let it run for quite some time but it does not show up.

Here is my start.bash configuration:
./ethdcrminer64 -epool stratum+tcp://eu.alpereum.ch:3002 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x -eworker rig1 -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal 5c7fb8123b35f1bb82d5123598c9b13ee9408f6b39c0b6ffba05038800ce156db9743becd18a/rig1/[email protected] -dpsw x -dcoin sia -allpools 1

.
.
.

Try:

-dcoin sc

Thanks for the help I guess, but as I said, it mines the Siacoins fine, they show up in my pool and everything is great, but the ether is not showing up, my ether pool does not seem to recognize that I am mining ether.

Maticul

newbie

Activity: 37

Merit: 0

Quote from: Andrey123 on May 25, 2017, 05:01:06 AM

Guys, but how to set up a miner for the production of the ether classic?
And which pool is better?
AMD cards

fly pool is good.

grobuzga

newbie

Activity: 6

Merit: 0

Hello there!
I just started using Claymore miner v9.4 with nicehash for Ethash+Siacoin mining. I noticed, that in this mode nicehash web interface says, that extranonce.subscribe is not used, therefore mining performance is degraded. Is there any way to enable xnsub with this miner for siacoin?

Andrey123

sr. member

Activity: 1778

Merit: 305

Guys, but how to set up a miner for the production of the ether classic?
And which pool is better?
AMD cards

zorvalth

full member

Activity: 223

Merit: 100

Quote from: Claymore on May 25, 2017, 04:27:16 AM

Quote from: zorvalth on May 25, 2017, 01:57:12 AM

How does -mpsw works? I thought it should be -mpsw password and then set it in the remote manager , but its not like that..

Exactly, set "-mpsw xxxxx" in miner, then set same password in EthMan in the miner properties, that is all.

Yep the problem was i didnt set it in ethman.

Another question, I setn gmail smtp and i get "Could not load SSL library", any fix?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 867. (Read 6590718 times)