Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 247.

cryptohunter

legendary

Activity: 2100

Merit: 1167

MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG

Quote from: KrokoTill on January 09, 2017, 04:00:35 AM

I noticed an ad on Coinotron:

ZCash: 0% True PPS mining. Just change worker type to PPS !!!!
( until 2017-01-15 or pool's hashrate > 3 MH/s )

Though right now this pool has only 76 miners and miserably low hashrate.
In past it had been a very good pool for me with other algos.

they were too slow to add... got left behind.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: roony on January 08, 2017, 07:57:06 AM

Still, market is stuck in 46usd...is there any problem, why didn't price just rocked to 60 ou maybe 100usd?

What reason is there for a big price jump on ZEC?

Have *ANY* major retailers started accepting it?

I personally am shocked it's holding at double-digit dollars at all....

Right now the only reason ZEC price ever "jumps" is whales doing pump-and-dump moves.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: V_I_T_A_L_Y on January 08, 2017, 07:20:41 AM

Already began to reflect the replacement of the card at NVIDIA, took for the experiment were collected one rig 6*1070=2620-2700 sol give me Claymore v 10 really disappointed me. 390 I think AMD will not catch up with NVIDIA

Do keep in mind that the 1070 is ballpark $400 card, while the RX 470 are sub-$200 and many RX 480 are also sub-$200 though the average for the 480 seems to be closer to $220.

Why is it a shock that a high-end high cost card can outperform a "mainstream" much lower cost card?

The REAL comparison should be to the NVidia card in the same price range, the GTX 1060.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Pair of Sapphire ref-style RX 470, no bios mod

1250/1750/-75mv

-i 7

Went from a little under 200 sol/s each on v9.1 to 233ish each on v10

Nice improvement from 9.2 on my dual R9 280x too - 380ish total to 417 (unhappy card at -i4 happy card at -i6)

1100/1500 no bios mod

211-221 sol/s for a single R9 280x is in the range I'm seeing on my pair.

KrokoTill

newbie

Activity: 51

Merit: 0

I noticed an ad on Coinotron:

ZCash: 0% True PPS mining. Just change worker type to PPS !!!!
( until 2017-01-15 or pool's hashrate > 3 MH/s )

Though right now this pool has only 76 miners and miserably low hashrate.
In past it had been a very good pool for me with other algos.

jddebug

sr. member

Activity: 446

Merit: 250

Quote from: golden0707 on January 09, 2017, 03:44:33 AM

Quote from: golden0707 on January 09, 2017, 02:08:02 AM

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

So for single r9 280x hashspeed is okey ? Can i do more with it ?

Best I've gotten is 222 so far so I'd say your good.

golden0707

full member

Activity: 189

Merit: 100

Quote from: golden0707 on January 09, 2017, 02:08:02 AM

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

So for single r9 280x hashspeed is okey ? Can i do more with it ?

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: rpg on January 08, 2017, 02:22:37 PM

Quote from: merc1969 on January 08, 2017, 01:13:12 PM

Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?

I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU .
I had tried with v9.3 and also with 7.x
I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :

ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
ZEC: GPU0 0.000 H/s

with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?

Any pointers are appreciated.

install driver version 15.12 and upgrade from there.

No version 16 drivers AFAIK support pre-GCN cards at all.
15.12 should work with the HD 6450 - it works with my AMD A10-5700 APUs that are same-generation GPU units.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: kev7112001 on January 08, 2017, 11:15:15 PM

Quote from: JJ12880 on January 08, 2017, 08:04:48 PM

I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).

JJ

when u run cards like that in same rig u have to try diff configurations in card order also try 15.x drivers my case drivers dont make much difference i been running 1 rig with 7970 with a 290x with 14.12 7970 is at 267 v10 290 is at 335 v9.3 as 9.3 is better 4 290/390 atm

with your type i just set a guys r480 with 2 290x's it didnt like the rx480 in 2nd or last but 1st pcie slot just depends on the rig(mobo)as this was on a rig that wasnt cross x compatible was a old q9550 rig

ANY RX series card requires 16.x series drivers (I am not sure on the specific version, I *believe* somewhere around 16.4 is when support for the RX series was first added), as the 15.12 drivers predate the release of the RX series by a few months.

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: mafaz on January 08, 2017, 08:01:54 PM

Quote from: naeme18720 on January 08, 2017, 12:23:29 PM

Quote from: henz46 on January 08, 2017, 07:45:21 AM

Quote from: naeme18720 on January 08, 2017, 07:18:33 AM

V 10 ...rx 470 4gb

243h/s

what are your setting? I only get 233 h/s for sapphire rx 470 4gb

Gpu clock

1250

memory clock

1750

-75mv

245h/s

MY mined zcash in this pool...best pool in my idea

This link SING IN in pool

https://minergate.com/a/e172e848728edd0d2b97b9b5

what does -75mv do? do cards save power or the heat they produce is lower?

Yes ...power or the heat they produce is lower

BenCodie

legendary

Activity: 1708

Merit: 1048

Quote from: Etherion on January 09, 2017, 02:11:35 AM

Quote from: golden0707 on January 09, 2017, 02:08:02 AM

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

I have HD7990's which are two HD7970's. Thet run at 255-261 SOL/S per GPU

Claymore detect them as 280x which is incorrect but I don't think it matters.

Problem is that the reported sol/s and the pool differs by about 16%.

Not sure why

Same here mine Sapphire HD 7990's detects as two 280x by CM but it doesn't matter

golden0707

full member

Activity: 189

Merit: 100

Quote from: Etherion on January 09, 2017, 02:11:35 AM

Quote from: golden0707 on January 09, 2017, 02:08:02 AM

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

I have HD7990's which are two HD7970's. Thet run at 255-261 SOL/S per GPU

Claymore detect them as 280x which is incorrect but I don't think it matters.

Problem is that the reported sol/s and the pool differs by about 16%.

Not sure why

Doing >255 sols per GPU is really great. Whats your invironment (driver ver. settings) ?

Im thinking to go back to 15.12 drivers.

Cheers.

BenCodie

legendary

Activity: 1708

Merit: 1048

Quote from: BenCodie on January 09, 2017, 12:25:45 AM

Quote from: apolousm on January 08, 2017, 09:32:18 PM

Quote from: Etherion on January 08, 2017, 04:02:06 PM

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.

the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

He have dual GPUs in one card
used one pcie slot for one card = 2GPUs

Quote from: kev7112001 on January 09, 2017, 01:04:50 AM

not true u can install 8 separate cards if u have 8 slots

I am talking about his(Etherion) scenario to clear other guy's(apolousm) confusion

Etherion

sr. member

Activity: 512

Merit: 260

Quote from: golden0707 on January 09, 2017, 02:08:02 AM

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

I have HD7990's which are two HD7970's. Thet run at 255-261 SOL/S per GPU

Claymore detect them as 280x which is incorrect but I don't think it matters.

Problem is that the reported sol/s and the pool differs by about 16%.

Not sure why

golden0707

full member

Activity: 189

Merit: 100

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?

Etherion

sr. member

Activity: 512

Merit: 260

Quote from: BenCodie on January 09, 2017, 12:25:45 AM

Quote from: apolousm on January 08, 2017, 09:32:18 PM

Quote from: Etherion on January 08, 2017, 04:02:06 PM

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.

the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

He have dual GPUs in one card
used one pcie slot for one card = 2GPUs

correct

I have two HD7990 in that system.

Smokescreen

newbie

Activity: 7

Merit: 0

Hi using claymore zec 10. It crashes my rig other version seem to still work anyone had this happen? Rig is 2 280x and 1 370. Drivers 16.6 windows 10. Also use ddu and go with 15.12?

kev7112001

sr. member

Activity: 479

Merit: 250

not true u can install 8 separate cards if u have 8 slots

BenCodie

legendary

Activity: 1708

Merit: 1048

Quote from: apolousm on January 08, 2017, 09:32:18 PM

Quote from: Etherion on January 08, 2017, 04:02:06 PM

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.

the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

He have dual GPUs in one card
used one pcie slot for one card = 2GPUs

BenCodie

legendary

Activity: 1708

Merit: 1048

Quote from: JJ12880 on January 08, 2017, 08:04:48 PM

Quote from: djtim_aust on January 08, 2017, 05:38:36 PM

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).

JJ

15.12 drivers are not for Rx series
use 16.9.2 drivers
i am sure you are good to go with 16.9.2

Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 247. (Read 3839204 times)