any chance you will begin to work on nvidia and cuda? amd is reaching is limit already i don't think it's possible to do high improvement anymore
on the other hand a 1070 is stuggling to have 125 sol and it should be 160 at the very least, and i think it might be higher, up to 180...
Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux) - page 536. (Read 3839206 times)
Does anyone have a stable BIOS for RX 480 Nitro+ 4Gb Elpida?
This one isn't working for me: https://forum.ethereum.org/discussion/10570/bios-for-sapphire-nitro-rx480-4gb-elpida
And what clocks and voltage are you using?
Didn't find anything on this thread :/
This one isn't working for me: https://forum.ethereum.org/discussion/10570/bios-for-sapphire-nitro-rx480-4gb-elpida
And what clocks and voltage are you using?
Didn't find anything on this thread :/
I have a link for the 4gb and the 8gb versions, http://www.cryptominingtalk.com/flashing-bios/
edit: dont know if its the same though.
Does anyone have at least proper clocks and voltages for best h/W ?
Have 1300MHz/1060mV and 1800Mhz/960mV for Mem right now
Friends, follows new option for zcash mining.
https://www.f2pool.com/help
line:
ZecMiner64.exe -zpool zec.f2pool.com:3357 -zwal xxxxxxxxxxxxxxx.worker -zpsw x
Claymore'z v7.0
Over 260H/s on Fury X using 7.0.
For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list
295x2 shapire - 452 sol/s to complete the list
Hi,
may I have some question about using -mport..? I was suspicious why the coinmine.pl showing values which are not coresponding with my hashrate properly, often too much under average (not just in devfee period) and average was lower than should be.
So I set -mport 0 to all of my rigs, in version 6 it was good, pool was showing "better" values, I cant say if it was just luck, but V7 came and after a few seconds of mining is software is falling down.
When I set -mport -3333 or nothing everything is ok. Thanks for response.
may I have some question about using -mport..? I was suspicious why the coinmine.pl showing values which are not coresponding with my hashrate properly, often too much under average (not just in devfee period) and average was lower than should be.
So I set -mport 0 to all of my rigs, in version 6 it was good, pool was showing "better" values, I cant say if it was just luck, but V7 came and after a few seconds of mining is software is falling down.
When I set -mport -3333 or nothing everything is ok. Thanks for response.
i want back to time when claymore didnt release optimized old card, this is ruined zec mining, all those new card stuck like hell
except the nano's hash rate is pretty amazing with low power cunsumption 205 h/s / 80 watt
RX series 90 watt at 0.9v core doing 160hs
except the nano's hash rate is pretty amazing with low power cunsumption 205 h/s / 80 watt
RX series 90 watt at 0.9v core doing 160hs
Nano's FTW!
Edit: I've seen mention of assessing your GPUs ASIC quality, how do you tell? GPUz? or just the hash rate?
Hi
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
zec.suprnova.cc lets you use fixed diff, flypool's diff is fixed as well but it doesn't take into account your hashrate. this is why you see a difference. I think there diff is 1000 sol's, so divide that by 155/1000 and that is how long it will take to get a share.RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
so which is best for one card
Hi
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
zec.suprnova.cc lets you use fixed diff, flypool's diff is fixed as well but it doesn't take into account your hashrate. this is why you see a difference. I think there diff is 1000 sol's, so divide that by 155/1000 and that is how long it will take to get a share. RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
Hi
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
The average is smaller, that is because every hour the devfee kick's in for a minute and then you recconect on the pool....and start all over again to calculate your average hash rate. Dont worry, the average in the miner isn't false
I think it is time for dual, something like ZEC+ZCL or something 
Whats the problem with mining on nicehash?
With -allpools 1
Without it will not start...
With -allpools 1
Without it will not start...
What's the problem? It still mines for you. It will try to find good pool for devfee, it may take some time since ZEC pools are unstable.
it doesn't effect my mining at all?
The only problem is it cannot connect for an hour or two, miner will stop mining after that. But within this period miner will check several pools many times and must find good pool.
Its solved with V7. Tnx!
Hi
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
RED DEVIL RX470 - 4GB @ - 155 sols displaying on Mining Software
But Pool shows 10 % different
Windows 7 64Bit - 6 GB Ram,
Claymore 7
Here is my pool link
http://zcash.flypool.org/miners/t1RLqYJYnTytTuvTudhLfa7NvkT7hcvS2Fb
and anyone have bios for increasing sols... i am new to the field .
People is this still Claymore's tread? No it's mining kindergarten tread!
For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list
http://www.bilder-upload.eu/show.php?file=6d7ede-1479551505.png
GPU 0 Sapphire 290X reference
GPU1-4 MSI 290x 4G
GPU5-6 MSI 295X2
all about -25% in Power limits
sapphire nitro+ rx 480 4gb 1325/1900 modded bios 173-176 h/s GPU-Z 83 W, on wattmeter 120 W
sapphire nitro+ rx 470 8gb 1300/2050 modded bios 162-165 h/s GPU-Z 88 W, on wattmeter 130 W
**I got the number on wattmeter from = system power consumption when mining - system power consumption when not mining.
Can anybody with good knowledge here give his professional opinion on the difference between the number reported by GPU-Z and wattmeter? & where this difference come from?
sapphire nitro+ rx 470 8gb 1300/2050 modded bios 162-165 h/s GPU-Z 88 W, on wattmeter 130 W
**I got the number on wattmeter from = system power consumption when mining - system power consumption when not mining.
Can anybody with good knowledge here give his professional opinion on the difference between the number reported by GPU-Z and wattmeter? & where this difference come from?
Do you think your CPU/RAM/Board needs no power? The value on GPU-Z is the pure GPU power running through the PCIe-slot
Of course I know my system (cpu/RAM/motherboard etc) needs power.. the system when not mining consume about 110 watt.. when start mining using one card for example with rx 480 card the whole power consumption become around 230 watts.. when using the 470 it becomes 240 watts.. when using both card it goes about 360s watts.. So do you mean when the GPU running, it draws power DIRECTLY from PSU as reported in GPU-Z and at the same time it also draw power more from the system (cpu/ram/board) as you say?
I would underclock and undervolt otherwise, but I doubt the card would pull 166 sols.
The card most certainly does > 165 sols/s with 1400 GPU speed. Tested on all 5 of my cards and they all hit those figures.
What I meant is that if you underclock and undervolt the core, the card won't pull 166 sols.
There isn't much room for undervolting if you want to run it at 1350 core engine clock, you might even have to overvolt to get it stable at that speed.
Right now just mine ETH+SIA and you will make slightly more then ZEC.
Dual mining ETH+SIA heats up the GPUs much much more than ZEC, which makes the 470 too noisy for an office.
Plus my 295x2 will probably start throttling if I dual mine it since the temp limit is fixed at 75C.
For those, who need comparison data.
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
version 7 speeds:
7870 - 95 sol/s
7950 - 145 sol/s
7970 - 165 sol/s
270x - 100 sol/s
280x - 165 sol/s
285 - 110 sol/s
470 4Gb - 155 sol/s
Couldn't be more accurate. You can add
290 - 200 sol/s to complete the list
I would underclock and undervolt otherwise, but I doubt the card would pull 166 sols.
The card most certainly does > 165 sols/s with 1400 GPU speed. Tested on all 5 of my cards and they all hit those figures.
what voltage do you use for 1400 Gpu speed?
900 mV
sapphire nitro+ rx 480 4gb 1325/1900 modded bios 173-176 h/s GPU-Z 83 W, on wattmeter 120 W
sapphire nitro+ rx 470 8gb 1300/2050 modded bios 162-165 h/s GPU-Z 88 W, on wattmeter 130 W
**I got the number on wattmeter from = system power consumption when mining - system power consumption when not mining.
Can anybody with good knowledge here give his professional opinion on the difference between the number reported by GPU-Z and wattmeter? & where this difference come from?
sapphire nitro+ rx 470 8gb 1300/2050 modded bios 162-165 h/s GPU-Z 88 W, on wattmeter 130 W
**I got the number on wattmeter from = system power consumption when mining - system power consumption when not mining.
Can anybody with good knowledge here give his professional opinion on the difference between the number reported by GPU-Z and wattmeter? & where this difference come from?
Do you think your CPU/RAM/Board needs no power? The value on GPU-Z is the pure GPU power running through the PCIe-slot
Jump to: