Here is a wonderful question...
I assume you are ordering a min of 10 because they are sold in 10 qty with a controller like all the other listings from Gridseed resellers?
http://www.aliexpress.com/item/world-first-GridSeed-litecoin-bitcoin-miner-fast-shipping/1625115981.html
If someone buys a 10 qty will you also be sending the other pieces or are you buying them as individual miners?
Topic: [Closed - Group Buy]Gridseed USB ASIC sha/scrypt miner 0.35 [USA Only] - page 6. (Read 17583 times)
February 11, 2014, 07:35:46 PM
February 11, 2014, 04:36:10 PM
For those asking about power.
here is the power supply that is used in the photo's and is a fairly standard industrial power supply 30 Amp will drive 5
in either mode. and be safe. if you are going to stay in scrypt mode exclusively .5 amps per unit can safely run more
than probably be secured without connection issues. (could in theory connect 60 although I always allow 10% on continuous rating)
http://www.amazon.com/Universal-Regulated-Switching-Computer-Project/dp/B00D7CWSCG/ref=sr_1_1?ie=UTF8&qid=1392141141&sr=8-1&keywords=power+supply+12v+30amp
This power supply will allow you to run 15 at full power. (slightly more actually)
http://www.amazon.com/Meanwell-Switching-Power-Constant-Ledwholesalers/dp/B007K4XZPG/ref=pd_rhf_dp_s_cp_5_YDA1?ie=UTF8&refRID=0EKYF1P7NQRC16GCXEE6
Would be interesting to see the power draw on the new firmware to allow for calcultions on a power supply:) although the 30 amp one would
be a very safe range if staying on scrypt, I don't see it going above 12 watts per unit. at that you could drive 27 without issue.
BTW a fairly standard laptop power supply would drive one of these.
El
The Guy that works on the equipment that makes Computer Chips. Wet/Diffusion/Epi/CMP
here is the power supply that is used in the photo's and is a fairly standard industrial power supply 30 Amp will drive 5
in either mode. and be safe. if you are going to stay in scrypt mode exclusively .5 amps per unit can safely run more
than probably be secured without connection issues. (could in theory connect 60 although I always allow 10% on continuous rating)
http://www.amazon.com/Universal-Regulated-Switching-Computer-Project/dp/B00D7CWSCG/ref=sr_1_1?ie=UTF8&qid=1392141141&sr=8-1&keywords=power+supply+12v+30amp
This power supply will allow you to run 15 at full power. (slightly more actually)
http://www.amazon.com/Meanwell-Switching-Power-Constant-Ledwholesalers/dp/B007K4XZPG/ref=pd_rhf_dp_s_cp_5_YDA1?ie=UTF8&refRID=0EKYF1P7NQRC16GCXEE6
Would be interesting to see the power draw on the new firmware to allow for calcultions on a power supply:) although the 30 amp one would
be a very safe range if staying on scrypt, I don't see it going above 12 watts per unit. at that you could drive 27 without issue.
BTW a fairly standard laptop power supply would drive one of these.
El
The Guy that works on the equipment that makes Computer Chips. Wet/Diffusion/Epi/CMP
February 11, 2014, 11:45:49 AM
Pm sent. Quick response. Paid for 1. Thanks!
Received and confirmed.
February 11, 2014, 11:39:17 AM
Pm sent. Quick response. Paid for 1. Thanks!
February 11, 2014, 09:41:43 AM
PM sent with info of shipping and payment of 4 units.
Thanks.
received and confirmed. Thanks.
February 11, 2014, 09:37:05 AM
PM sent with info of shipping and payment of 4 units.
Thanks.
Thanks.
February 11, 2014, 09:31:21 AM
Is there an update on shipping?
Possible I should have them by the end of this week so should be shipping out to yaw by the beginning of next week.
Batch #2 NOW OPEN!
Accepting PayPal as well. Please check main OP for pricing.
Crap. missed batch 1 and now ordered LA3M, and no funds for more ATM.
Asiabtc just said he may have hit USD quota though, so I'll put an order for 5 in very, very tentatively if that's OK.
February 11, 2014, 09:26:09 AM
Reserved/order list.
Batch 2
Public Address: 14K3Gvub5xDvSJ6igFYvLj8HwJ3jc1r4bx
16/10
CSM00 - 10 - Paid
lajz99 - 2 - Paid
Eldoen - 4 - Paid
Batch 2
Public Address: 14K3Gvub5xDvSJ6igFYvLj8HwJ3jc1r4bx
16/10
CSM00 - 10 - Paid
lajz99 - 2 - Paid
Eldoen - 4 - Paid
Would you verify the address for Batch 2 orders? I ask because I am paying for 4 units and checked the blockchain to verify the address for 16 units already paid, and there is only 1.15BTC that has gone to that address.
I want to send my payment to the correct place.
Because 14 of those units were paypal...
Yes the address is correct.
February 11, 2014, 09:24:34 AM
Reserved/order list.
Batch 2
Public Address: 14K3Gvub5xDvSJ6igFYvLj8HwJ3jc1r4bx
16/10
CSM00 - 10 - Paid
lajz99 - 2 - Paid
Eldoen - 4 - Paid
Batch 2
Public Address: 14K3Gvub5xDvSJ6igFYvLj8HwJ3jc1r4bx
16/10
CSM00 - 10 - Paid
lajz99 - 2 - Paid
Eldoen - 4 - Paid
Would you verify the address for Batch 2 orders? I ask because I am paying for 4 units and checked the blockchain to verify the address for 16 units already paid, and there is only 1.15BTC that has gone to that address.
I want to send my payment to the correct place.
February 11, 2014, 02:35:34 AM
recived and updated main OP
16 units already reserved and paid for. Very good start to batch 2
16 units already reserved and paid for. Very good start to batch 2
February 11, 2014, 02:18:24 AM
Sending over payment for 2.
February 11, 2014, 01:00:39 AM
sent pm, Interested in 4.
In answer to Customs, there is no Import fees on electronic goods.
El
In answer to Customs, there is no Import fees on electronic goods.
El
Need your email to send the invoice to.
February 11, 2014, 12:33:58 AM
sent pm, Interested in 4.
In answer to Customs, there is no Import fees on electronic goods.
El
In answer to Customs, there is no Import fees on electronic goods.
El
February 11, 2014, 12:08:07 AM
Is there an update on shipping?
Possible I should have them by the end of this week so should be shipping out to yaw by the beginning of next week.
Batch #2 NOW OPEN!
Accepting PayPal as well. Please check main OP for pricing.
February 10, 2014, 05:50:18 PM
Is there an update on shipping?
February 10, 2014, 07:35:04 AM
What is the hashrate for one of those?
300khs but new firmware is being tested and has reached 500-600khs
Is it new firmware or is a new board which just has 2x as many chips on it? I was under the impression that Gridseed was going to create a new board with more chips (thus reach higher hash numbers) and drop it into a typical ATX style case...Am I completely mistaken???
New firmware.
Wow! I'm speechless...I bought the LA3M which is 10 of these....I can't wait for the new firmware to be released....uh I guess I should wait till I get these in my hot little hands before I get all crazy abou the new firmware, huh?
Hi Worldly:
did you have to pay import duties on your order? They are asking me what I want them to invoice? Is this a way to get the duty down? (there may be something lost in translation....)
I don't know..I paid 3.44BTC (~$2750USD) so I presume when I get them I'd pay import duties? I don't know the rules for having stuff sent from China to the US. I havent' got the package yet so I don't know...this is the first time ever I've had something sent to me from outside the US...so its a whole new adventure.
I've had stuff sent to me from china and never had any issues or had to pay import tax. But i cannot tell you its always the same.
February 10, 2014, 07:33:07 AM
What is the hashrate for one of those?
300khs but new firmware is being tested and has reached 500-600khs
Is it new firmware or is a new board which just has 2x as many chips on it? I was under the impression that Gridseed was going to create a new board with more chips (thus reach higher hash numbers) and drop it into a typical ATX style case...Am I completely mistaken???
New firmware.
Wow! I'm speechless...I bought the LA3M which is 10 of these....I can't wait for the new firmware to be released....uh I guess I should wait till I get these in my hot little hands before I get all crazy abou the new firmware, huh?
Hi Worldly:
did you have to pay import duties on your order? They are asking me what I want them to invoice? Is this a way to get the duty down? (there may be something lost in translation....)
I don't know..I paid 3.44BTC (~$2750USD) so I presume when I get them I'd pay import duties? I don't know the rules for having stuff sent from China to the US. I havent' got the package yet so I don't know...this is the first time ever I've had something sent to me from outside the US...so its a whole new adventure.
February 10, 2014, 05:30:45 AM
Batch #2 coming soon!
February 09, 2014, 11:33:12 PM
What is the hashrate for one of those?
300khs but new firmware is being tested and has reached 500-600khs
Is it new firmware or is a new board which just has 2x as many chips on it? I was under the impression that Gridseed was going to create a new board with more chips (thus reach higher hash numbers) and drop it into a typical ATX style case...Am I completely mistaken???
New firmware.
Wow! I'm speechless...I bought the LA3M which is 10 of these....I can't wait for the new firmware to be released....uh I guess I should wait till I get these in my hot little hands before I get all crazy abou the new firmware, huh?
Hi Worldly:
did you have to pay import duties on your order? They are asking me what I want them to invoice? Is this a way to get the duty down? (there may be something lost in translation....)
February 09, 2014, 09:27:24 PM
What is the hashrate for one of those?
300khs but new firmware is being tested and has reached 500-600khs
OOOOoooooOOOOO kinky.
See and some feared being an early adopter was foolish if the hash rate can double with new FW then I think a lot more people are going to start wanting them
Jump to: