We've decided to close this topic and open a new one, which will be self-moderated.
Regards,
The CryptoDredge Team.
New topic here
Topic: CryptoDredge 0.8.0 — NVIDIA GPU Miner [obsolete] (Read 25238 times)
My Rigs are all 1080 Ti. I run my cards at 95% power, with +35 Clock, +85 Memory, and both fans at 100%. Card temps never exceed 60C. If you are having issues turn down your card's power, or add more air flow. Nothing compares to Dredge for Lyra2REV2. But if you have any weak cards in your rigs, Dredge will definitely make them known. The only Algo I have problems with is Phi2, as I think I have a weak card in my Rig. Just need to turn down the power on that one card to correct the issue.
sounds good, I will give this miner a try, as it does appear to be the fastest. Another issue is right now the most profitable coin to mine with Lyra2REV2 is Verge, and yet I
couldn't find a reliable pool that offers this algo for Verge, are whattomine statistics wrong, or what pool would you guys recommend if indeed you are mining Verge
with Lyra2Rev2 ?..
The feedback from multiple sources for this miner is that it runs a bit too hot, particularly with 1080 TI's,
Can anyone recommend an equivalent or faster miner, especially for Lyra2Rev2 (where this miner seems to be having some issues with anyhow),
and that runs more efficiently or at least cooler than Crypto Dredge ?..
Can anyone recommend an equivalent or faster miner, especially for Lyra2Rev2 (where this miner seems to be having some issues with anyhow),
and that runs more efficiently or at least cooler than Crypto Dredge ?..
My Rigs are all 1080 Ti. I run my cards at 95% power, with +35 Clock, +85 Memory, and both fans at 100%. Card temps never exceed 60C. If you are having issues turn down your card's power, or add more air flow. Nothing compares to Dredge for Lyra2REV2. But if you have any weak cards in your rigs, Dredge will definitely make them known. The only Algo I have problems with is Phi2, as I think I have a weak card in my Rig. Just need to turn down the power on that one card to correct the issue.
The feedback from multiple sources for this miner is that it runs a bit too hot, particularly with 1080 TI's,
Can anyone recommend an equivalent or faster miner, especially for Lyra2Rev2 (where this miner seems to be having some issues with anyhow),
and that runs more efficiently or at least cooler than Crypto Dredge ?..
Can anyone recommend an equivalent or faster miner, especially for Lyra2Rev2 (where this miner seems to be having some issues with anyhow),
and that runs more efficiently or at least cooler than Crypto Dredge ?..
Yes, but I can Solo mine with another three miners, only I am getting "reject reason: high-hash" error, when I find a block. So, SWAP can be Solo mined IMO.
If you don't get accepted blocks, you get nothing regardless of what they say.
Yes, but I can Solo mine with another three miners, only I am getting "reject reason: high-hash" error, when I find a block. So, SWAP can be Solo mined IMO.
Just in case, Bitcoin dropped GetWork in v0.10. Any coin forked off after this release has no GW support either unless their devs have reintegrated it back. It isn't difficult after all.
SWAP
:restart
@echo off
TIMEOUT 5
cudaminer-x64 -o http://127.0.0.1:9337 -u xxx -p xxx -i 21
goto :restart
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=9337
server=1
daemon=1
listen=1
gen=0
:restart
@echo off
TIMEOUT 5
cudaminer-x64 -o http://127.0.0.1:9337 -u xxx -p xxx -i 21
goto :restart
rpcuser=xxx
rpcpassword=xxx
rpcallowip=127.0.0.1
rpcport=9337
server=1
daemon=1
listen=1
gen=0
I try to Solo mine neoscrypt coin, but all Nvidia cards don't mine (0.00 h/s).
What is the problem?
What is the problem?
AFAIR only my NeoScrypt CUDAminer supports solo mining through GetWork.
I have tried your miner just now. Getting error: "JSON-RPC call failed: Method not found"
I have no idea what coin you're attempting to mine solo, what's the configuration of the miner and the daemon, etc.
I try to Solo mine neoscrypt coin, but all Nvidia cards don't mine (0.00 h/s).
What is the problem?
What is the problem?
AFAIR only my NeoScrypt CUDAminer supports solo mining through GetWork.
I have tried your miner just now. Getting error: "JSON-RPC call failed: Method not found"
Where can I download the latest and test it?
At the moment at was able to Solo mine neoscrypt only with three miners: NeverMore 0.2.3, ccminer-1.76-r10-neoscrypt and ccminer-2.2-mod-r2-CUDA9. But all of them get error "reject reason: high-hash" when I find a block.
Maybe you can suggest something?
At the moment at was able to Solo mine neoscrypt only with three miners: NeverMore 0.2.3, ccminer-1.76-r10-neoscrypt and ccminer-2.2-mod-r2-CUDA9. But all of them get error "reject reason: high-hash" when I find a block.
Maybe you can suggest something?
I try to Solo mine neoscrypt coin, but all Nvidia cards don't mine (0.00 h/s).
What is the problem?
What is the problem?
AFAIR only my NeoScrypt CUDAminer supports solo mining through GetWork.
I try to Solo mine neoscrypt coin, but all Nvidia cards don't mine (0.00 h/s).
What is the problem?
https://ibb.co/b4d2Qe
What is the problem?
https://ibb.co/b4d2Qe
One of my only complaints with CryptoDredge is the lack of hash rate displayed upon submitting shares. Other miners will tell me my current hashrate when submitting a share, and this helps me to track if all my cards are working at their full potential. If maybe you could provide a flag we could add to the command string something like ("-showhashrate 1") that would greatly be appreciated.
+1 to this request. One of my only complaints with CryptoDredge is the lack of hash rate displayed upon submitting shares. Other miners will tell me my current hashrate when submitting a share, and this helps me to track if all my cards are working at their full potential. If maybe you could provide a flag we could add to the command string something like ("-showhashrate 1") that would greatly be appreciated.
Thanks for your suggestion. We will add this feature if there's a lot of request for it
One of my only complaints with CryptoDredge is the lack of hash rate displayed upon submitting shares. Other miners will tell me my current hashrate when submitting a share, and this helps me to track if all my cards are working at their full potential. If maybe you could provide a flag we could add to the command string something like ("-showhashrate 1") that would greatly be appreciated.
Ty for the quick answer but sadly it didn't help. I tried both cuda 9.1 & 9.2.
You probably don't have enough virtual memory, be sure you have at least as much as your GPU memory (example if you have 6x gpu that have 8gb of ram, set virtual memory to ~50gb) neoscrypt algo need it.
@cryptodrege dev
can we expect soon backup pool feature ? i like the miner it's great, thanks
Cheers.
We are finishing work on this feature. It will be available in the next release.
Cheers!
Great to hear, keep up the good work
there are any multialgo like nemosminer that use cryptodredge?
Hash Auger also supports CryptoDredge, has an easy-to-use UI and a low developer's contribution of 1% (15 minutes per day). It also has a lot of advanced features such as algorithm specific overclock and intensity settings, temperature management, earnings tracking and time of day energy settings. You can learn more at: https://hashauger.com
there are any multialgo like nemosminer that use cryptodredge?
Hash-kings miner does too!Discord: https://discord.gg/xHF58kN
Website: http://devapi.hash-kings.com/HashKings/frontend/web/index.php?r=site%2Findex
Ann: https://bitcointalksearch.org/topic/ann-beta-hash-kings-20-fastest-platform-with-almost-all-gpu-algorithms-4800505
there are any multialgo like nemosminer that use cryptodredge?
RainbowMiner has CryptoDredge build in.
borox
Jump to: