Topic: CryptoDredge 0.8.0 — NVIDIA GPU Miner [obsolete] - page 3. (Read 25238 times)
Is it possible to get current hashrate via API instead of average?
wow smashes it on lyra2v2 with my 1080ti on ubuntu.
I was getting 68- 72Mhs with some ccminer variant. this comes straight in at 81.5Mhs, with no overclock settings touched.
Mabey you could add xevan algo in the future?
Great miner so far!
I was getting 68- 72Mhs with some ccminer variant. this comes straight in at 81.5Mhs, with no overclock settings touched.
Mabey you could add xevan algo in the future?
Great miner so far!
faster than t-rex on 1080ti lyra2z, impressive dude!
Performance
| 1080 Ti | 1080 | 1070 | 1060 | 1050 Ti | 1050 | ||
| Allium | Mh/s | 9.7 - 10.5 | 7 - 7.4 | 5.3 - 5.7 | 3.6 - 3.8 | 2.2 - 2.4 | 2 - 2.3 |
| Lyra2REv2 | Mh/s | 77 - 85 | 55 - 61 | 42 - 49 | 26 - 31 | 16.5 - 18 | 13.5 - 15 |
| Lyra2z | Mh/s | 4.6 - 5 | 3.2 - 3.5 | 2.4 - 2.7 | 1.3 - 1.5 | 0.9 - 1 | 1 - 1.2 |
| NeoScrypt | kh/s | 1740 - 1835 | 1330 - 1390 | 1220 - 1310 | 770 - 840 | 470 - 530 | 395 - 420 |
| Phi2 | Mh/s | 8.6 - 9 | 6 - 6.4 | 4.6 - 5 | 3 - 3.3 | 1.9 - 2.1 | 1.7 - 2 |
new version verygood for lyra2z.
so fast to mine more than ccminer
so fast to mine more than ccminer
On my Desktop with 2 x 1080, It runs good and rotates with other Miners without issue, though My computer started to Blue Screen on me after installing it. Since taking Cryptodredge out of the available miners, system is stable again.
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
Question.
I have setup Crytodredge with Sniffdog Miner. On my desktop with 2 x 1080 it works great no issues.
But on my miner Rigs ( 4x 1080 ti and 8 x 1080 ti ) upon changing to another algo using a different mining software(ccminer for example) that is more profitable, Crytodredge doesn't close. It continues to run at the same time as the other program. Any thoughts on what would prevent Crytodredge from closing when its supposed to?
All Systems are running windows 10.
Desktop has 32 GB of DDR4, Miners have 8GB of DDR4
All Systems are running off an M.2 SSD
1080ti are +85 Clock + 190 Memory, 95% Power
1080 are stock, 100% Power
All cards are limited to 75C
Only doing Lyra2RE2 on all systems for Crytodredge, as other miners were faster on other Algos.
Thanks for your report. We'll check it.I have setup Crytodredge with Sniffdog Miner. On my desktop with 2 x 1080 it works great no issues.
But on my miner Rigs ( 4x 1080 ti and 8 x 1080 ti ) upon changing to another algo using a different mining software(ccminer for example) that is more profitable, Crytodredge doesn't close. It continues to run at the same time as the other program. Any thoughts on what would prevent Crytodredge from closing when its supposed to?
All Systems are running windows 10.
Desktop has 32 GB of DDR4, Miners have 8GB of DDR4
All Systems are running off an M.2 SSD
1080ti are +85 Clock + 190 Memory, 95% Power
1080 are stock, 100% Power
All cards are limited to 75C
Only doing Lyra2RE2 on all systems for Crytodredge, as other miners were faster on other Algos.
I setup Crytodredge again on my Sniffdog miner. This time I manually set the intensity to 5 ( default was 6 ), So far everything is running well. The interesting thing was going from 6 to 5 did not result in any significant drop in hashrate. Its only been running for an hour on my miners. Hopefully it runs glitch free the rest of the day.
Is Devfee fixed or it still increasing the powerlimit to mine it?
CryptoDredge has never changed the power limit.Is Devfee fixed or it still increasing the powerlimit to mine it?
CryptoDredge has never changed the power limit.1080ti, phi2, 8.2Mhs, 95TDP, -50mem, 68C 
?? it does 9.1+ on 1080 Ti and lower TDP
Didn't play with settings at all, just left what was in Afterburner for previous algo I used.
Is Devfee fixed or it still increasing the powerlimit to mine it?
CryptoDredge has never changed the power limit.Getting crashing on my cuda 9.1 workstation
cuda error: unspecified launch failure in cduMem::read (58)
[12:42:50] ERROR - GPU2 stopped working due to a critical error
[12:42:50] INFO - Attempt to restart after 10 seconds
cuda error: unspecified launch failure in cduMem::read (58)
[12:42:50] ERROR - GPU1 stopped working due to a critical error
[12:42:50] INFO - Attempt to restart after 10 seconds
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in algWorkerStd::finalise (141)
cuda error: all CUDA-capable devices are busy or unavailable in cduMem::create (45)
[12:43:00] ERROR - GPU2 unable to recover from error
cuda error: unspecified launch failure in duMem::free (3936m)
cuda error: unspecified launch failure in cduMem::free ********************************************************************************
_____ _ _____ _
/ ____| | | | __ \ | |
| | _ __ _ _ _ __ | |_ ___ | | | |_ __ ___ __| | __ _ ___
| | | '__| | | | '_ \| __/ _ \| | | | '__/ _ \/ _` |/ _` |/ _ \
| |____| | | |_| | |_) | || (_) | |__| | | | __/ (_| | (_| | __/
\_____|_| \__, | .__/ \__\___/|_____/|_| \___|\__,_|\__, |\___|
__/ | | __/ |
|___/|_| |___/
********************************************************************************
* Disable overclocking.cuda error: unspecified launch failure in cduMem::read (58)
[12:42:50] ERROR - GPU2 stopped working due to a critical error
[12:42:50] INFO - Attempt to restart after 10 seconds
cuda error: unspecified launch failure in cduMem::read (58)
[12:42:50] ERROR - GPU1 stopped working due to a critical error
[12:42:50] INFO - Attempt to restart after 10 seconds
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in cduMem::free (36)
cuda error: unspecified launch failure in algWorkerStd::finalise (141)
cuda error: all CUDA-capable devices are busy or unavailable in cduMem::create (45)
[12:43:00] ERROR - GPU2 unable to recover from error
cuda error: unspecified launch failure in duMem::free (3936m)
cuda error: unspecified launch failure in cduMem::free ********************************************************************************
_____ _ _____ _
/ ____| | | | __ \ | |
| | _ __ _ _ _ __ | |_ ___ | | | |_ __ ___ __| | __ _ ___
| | | '__| | | | '_ \| __/ _ \| | | | '__/ _ \/ _` |/ _` |/ _ \
| |____| | | |_| | |_) | || (_) | |__| | | | __/ (_| | (_| | __/
\_____|_| \__, | .__/ \__\___/|_____/|_| \___|\__,_|\__, |\___|
__/ | | __/ |
|___/|_| |___/
********************************************************************************
* Use a video driver that above 390 and below 396 from http://www.nvidia.com/drivers/beta if use CUDA 9.1 version of the miner
* Change the riser card
On my Desktop with 2 x 1080, It runs good and rotates with other Miners without issue, though My computer started to Blue Screen on me after installing it. Since taking Cryptodredge out of the available miners, system is stable again.
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
Question.
I have setup Crytodredge with Sniffdog Miner. On my desktop with 2 x 1080 it works great no issues.
But on my miner Rigs ( 4x 1080 ti and 8 x 1080 ti ) upon changing to another algo using a different mining software(ccminer for example) that is more profitable, Crytodredge doesn't close. It continues to run at the same time as the other program. Any thoughts on what would prevent Crytodredge from closing when its supposed to?
All Systems are running windows 10.
Desktop has 32 GB of DDR4, Miners have 8GB of DDR4
All Systems are running off an M.2 SSD
1080ti are +85 Clock + 190 Memory, 95% Power
1080 are stock, 100% Power
All cards are limited to 75C
Only doing Lyra2RE2 on all systems for Crytodredge, as other miners were faster on other Algos.
Thanks for your report. We'll check it. I have setup Crytodredge with Sniffdog Miner. On my desktop with 2 x 1080 it works great no issues.
But on my miner Rigs ( 4x 1080 ti and 8 x 1080 ti ) upon changing to another algo using a different mining software(ccminer for example) that is more profitable, Crytodredge doesn't close. It continues to run at the same time as the other program. Any thoughts on what would prevent Crytodredge from closing when its supposed to?
All Systems are running windows 10.
Desktop has 32 GB of DDR4, Miners have 8GB of DDR4
All Systems are running off an M.2 SSD
1080ti are +85 Clock + 190 Memory, 95% Power
1080 are stock, 100% Power
All cards are limited to 75C
Only doing Lyra2RE2 on all systems for Crytodredge, as other miners were faster on other Algos.
Failover pool's?
Soon Is Devfee fixed or it still increasing the powerlimit to mine it?
CryptoDredge has never changed the power limit.
Is Devfee fixed or it still increasing the powerlimit to mine it?
Allium: My 1080 Ti saw a 28% performance increase (10.40 mH/s, from 8.0 mH/s), and an increase of 24% in power usage which I'm fine with (200watts, from 150w).
Screenshot: https://i.imgur.com/2ggAfo3.png
Screenshot: https://i.imgur.com/2ggAfo3.png
Wow Nice results. Having a hard time going above 9.3mh & 2075mhz core with zotac amp extremes while consuming almost 250watts if left unchecked hehe.
Have you played around the Power Target %? Here are the OC settings that I use for my EVGA GeForce GTX 1080 Ti SC2 HYBRID:
- Power Target: 80%
- GPU Clock Offset: +50 Mhz
- Mem Clock Offset: -512 Mhz
Sorry bro I had a few beers and I thought you were talking about phi2
I guess 9.3mh is quite good for phi2. Although for best efficiency Im sticking with 8.25mh/s @ 160 watts. Allium: My 1080 Ti saw a 28% performance increase (10.40 mH/s, from 8.0 mH/s), and an increase of 24% in power usage which I'm fine with (200watts, from 150w).
Screenshot: https://i.imgur.com/2ggAfo3.png
Screenshot: https://i.imgur.com/2ggAfo3.png
Wow Nice results. Having a hard time going above 9.3mh & 2075mhz core with zotac amp extremes while consuming almost 250watts if left unchecked hehe.
Have you played around the Power Target %? Here are the OC settings that I use for my EVGA GeForce GTX 1080 Ti SC2 HYBRID:
- Power Target: 80%
- GPU Clock Offset: +50 Mhz
- Mem Clock Offset: -512 Mhz
1080ti, phi2, 8.2Mhs, 95TDP, -50mem, 68C
?? it does 9.1+ on 1080 Ti and lower TDP
On my Desktop with 2 x 1080, It runs good and rotates with other Miners without issue, though My computer started to Blue Screen on me after installing it. Since taking Cryptodredge out of the available miners, system is stable again.
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
On my dedicated Miners however I running into issues with Crytodredge. When switching to another miner ( software ) sometimes it doesn't close down, causing it to run in tandem with other Miners, other times when switching algos to another coin that also uses crytodredge, it will open a new window for the new algo, but not close the original one. Something else I noticed is Cryptodredge seems to be very CPU instensive. Both my Miners ( 4 card and 8 Card ) had their CPU's maxed out when running it. These systems are running a Pentium CPU LGA 1151 socket on an ASUS Prime X270A motherboard. Makes me wonder if a faster more powerful CPU would aleviate these issues. On my desktop I am running an AMD threadripper 1950x, Rotating to other miners (software ) is never an issue.
Any thoughts?
1080ti, phi2, 8.2Mhs, 95TDP, -50mem, 68C
Jump to: