[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 16.

Truthchanter

sr. member

Activity: 689

Merit: 253

Quote from: tytanick on April 01, 2017, 04:10:24 AM

Quote from: Truthchanter on March 31, 2017, 01:57:17 PM

http://imgur.com/dJWHuiI

I have a request about an issue I'm having. In the simple rig resetter tool, on my computers that are headless (without monitor or high res dummy plug) the resolution is too low to access the side of the program to set the parameters and save and install the auto restart stuff. I can't increase the resolution any higher than that default low one and I can't scroll to the side.

could you somehow make the program in windows scroll able so I can scroll to the side like in a browser?

Nope i cant do scrollable program.
Try changing dpi in windows to lower meaby it will help?

Seems like I can only get it to zoom in (if I'm adjusting the right thing) where as I would need it to zoom out to get to the side stuff)

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: usuksobad on April 01, 2017, 09:06:08 AM

Is all the farms are using this? There's no better option than this? to save time and money?

Not polite to ask the question here.

His gear is good if you have a lot of rigs .

I do not know of a better automatic reset device.

Note automatic is the key word here

usuksobad

member

Activity: 107

Merit: 10

Is all the farms are using this? There's no better option than this? to save time and money?

KaydenC

sr. member

Activity: 610

Merit: 265

Looks awesome. Will be getting a V2 and extension board to manage an upcoming remote farm.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Truthchanter on March 31, 2017, 01:57:17 PM

http://imgur.com/dJWHuiI

I have a request about an issue I'm having. In the simple rig resetter tool, on my computers that are headless (without monitor or high res dummy plug) the resolution is too low to access the side of the program to set the parameters and save and install the auto restart stuff. I can't increase the resolution any higher than that default low one and I can't scroll to the side.

could you somehow make the program in windows scroll able so I can scroll to the side like in a browser?

Nope i cant do scrollable program.
Try changing dpi in windows to lower meaby it will help?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: kemo6600 on March 31, 2017, 03:41:24 PM

@tytanick
Are you running out of stock, i am trying to order 3 pieces and it is saying only 2 pieces in Stock

@tytanick
I still have problems trying to get watchdog working in windows 10

kemo6600

member

Activity: 130

Merit: 10

@tytanick
Are you running out of stock, i am trying to order 3 pieces and it is saying only 2 pieces in Stock

Truthchanter

sr. member

Activity: 689

Merit: 253

http://imgur.com/dJWHuiI

I have a request about an issue I'm having. In the simple rig resetter tool, on my computers that are headless (without monitor or high res dummy plug) the resolution is too low to access the side of the program to set the parameters and save and install the auto restart stuff. I can't increase the resolution any higher than that default low one and I can't scroll to the side.

could you somehow make the program in windows scroll able so I can scroll to the side like in a browser?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: supersonic on March 29, 2017, 04:37:14 AM

Im using SRR for couple weeks now, device is great and saves me lot of time so thumbs up! There is one thing that could be even more helpfull - when rig hangs the SRR works flawless but sometimes if only miner hangs not whole rig it still recieves packets and aint restarting - solution could be checking if miner is sending packets on custom set port unless someone has better idea.

Yes SSR is only resetting when whole operating system will froze and stops sending network packages.
If miner froze then operating system is working so you could make some software for it.
Anyway if you are using claymore there is already this function

-wd 1 -r 1
and you need to have reboot script inside directory.
In my SMOS its working ofcourse without any problem

Rig is restarting as soon as at least 1 GPU hangs.
But you need to use claymore and have -wd 1 -r 1 in parameters ofcourse.

supersonic

full member

Activity: 195

Merit: 104

Im using SRR for couple weeks now, device is great and saves me lot of time so thumbs up! There is one thing that could be even more helpfull - when rig hangs the SRR works flawless but sometimes if only miner hangs not whole rig it still recieves packets and aint restarting - solution could be checking if miner is sending packets on custom set port unless someone has better idea.

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Marvell1 on March 28, 2017, 10:07:23 AM

I cant get the agent to run under windows 10 , keep getting a message saying a windows service must be first installed or something.

I also dont see that unblock option like you have in your diagrams

thanks

Hi,
Try running Tool with ADMIN PRIVILEGES, so right click on binary and "Run as administrator"
Also dont run from zipped archive, unzip first on disk and then run it.
If you still will have problems write on [email protected] - tell me your Tema Viewer login and pass so i could take a look.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

I cant get the agent to run under windows 10 , keep getting a message saying a windows service must be first installed or something.

I also dont see that unblock option like you have in your diagrams

thanks

Truthchanter

sr. member

Activity: 689

Merit: 253

Just got my SRR yesterday and setting it up now. thanks!

bentcrypto

full member

Activity: 186

Merit: 100

Thanks for the info Citronick.
Hopefully they can implement it in later Pandaminers.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: bentcrypto on March 23, 2017, 09:19:57 AM

Hi Tytanick
Would these work with a Pandaminer?

https://www.pandaminer.com/default/product_detail?id=5

Simple answer NO.

But I have asked them to consider putting the required pins for SRR to work.

Pandaminer has emailed me that their technical team will review the integration possibilities.

bentcrypto

full member

Activity: 186

Merit: 100

Hi Tytanick
Would these work with a Pandaminer?

https://www.pandaminer.com/default/product_detail?id=5

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

SimpleRigResetter V1 STOCK IS AVAILABLE NOW IN MY SHOP.
http://shop.simplemining.net

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: deadsix on March 23, 2017, 05:15:16 AM

Quote from: Marvell1 on March 23, 2017, 03:51:52 AM

@tytanick

-also those biostar boards that have that stupid bug where they only power on half way unless a monitor is plugged in, do those work with the resetter or does a monitor need to be plugged in or a dummy plug?

Just curious, what cards are you referring to here?

GPUs dont make difference. Or you asking something else ?

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: Marvell1 on March 23, 2017, 03:51:52 AM

@tytanick

-also those biostar boards that have that stupid bug where they only power on half way unless a monitor is plugged in, do those work with the resetter or does a monitor need to be plugged in or a dummy plug?

Just curious, what cards are you referring to here?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: Marvell1 on March 23, 2017, 03:51:52 AM

@tytanick

-also those biostar boards that have that stupid bug where they only power on half way unless a monitor is plugged in, do those work with the resetter or does a monitor need to be plugged in or a dummy plug?
two of those are my problem rigs I was going to hook up with the resetter but i suspect they will do the normal thing as when headless, power on but wont go past the bios or whatever since no monitor is plugged in.
With those rigs when they go down i have to plug in a monitor and then reset , its anoying as fuck.

-20 or 30 min watchdog would be ideal

- and yes i do undervolt as much as i can of course all my cards are undervolted from -70 - -100 on the ones that can take it, core clocks turned down too. I have 47 rigs now around 5.5 GHZ of eth and anther 40k of dcr so
i need each and every one of those rigs , i cant downsize my boxes.

My Asrock PRO BTC can start up in linux without any connected dummy plugs. You just need to make "default onboard graphics to internal" - this could also work in biostar i suppose

In April/May there will be firmware with new Extension Boards and SSRv2 which will allow to go up to 40 minutes. This firmware will work on SRRv1 as it is the same archirecture.

- undervolt works in my OS but you need to check it yourself becasue its not common undervolt

Or if you have all gus with undervolt offset then it will work with no problem.

Topic: [DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!! - page 16. (Read 53273 times)