According to the above node, whether they should eccoin.conf file modification for the following ？
listen=1
server=1
daemon=1
maxconnections=100
rpcuser=
rpcpassword=
addnode=192.99.141.216:19118
addnode=38.93.234.100:19118
addnode=101.165.201.96:19118
addnode=173.62.236.4:19118
addnode=188.226.169.29:19118
addnode=24.47.189.169:19118
addnode=129.21.137.178:19118
addnode=50.47.54.210:19118
addnode=72.208.65.226:19118
addnode=24.184.168.36:64013
addnode=114.33.166.215:52642
addnode=50.77.240.42:36791
addnode=208.48.253.233:2379
addnode=50.148.195.160:62964
addnode=209.173.116.103:55577
addnode=125.16.73.46:52926
addnode=68.98.232.190:62044
addnode=50.186.104.112:42524
addnode=95.167.109.125:61336
addnode=130.111.219.86
addnode=14.124.41.77
addnode=69.254.47.191
addnode=115.29.160.13
addnode=67.174.140.115
addnode=194.33.113.172
addnode=188.44.107.246
addnode=46.159.202.245
addnode=93.104.211.172
rpcport=19119
rpcconnect=127.0.0.1
Topic: ECCoin (ECC) Takeover by Trusted-Cryptos Team [Griffith] - page 49. (Read 91207 times)
Did all the steps you adviced but still have the same problem.
I have 37 peers, all with version:60006, and subver:/ECCoin:0.7.2/
"addr" : "192.99.141.216:19118",
"addr" : "38.93.234.100:19118",
"addr" : "199.48.164.89:19118",
"addr" : "101.165.201.96:19118",
"addr" : "173.62.236.4:19118",
"addr" : "188.226.169.29:19118",
"addr" : "24.47.189.169:19118",
"addr" : "129.21.137.178:19118",
"addr" : "50.47.54.210:19118",
"addr" : "72.208.65.226:19118",
"addr" : "24.184.168.36:64013",
"addr" : "114.33.166.215:52642",
"addr" : "50.77.240.42:36791",
"addr" : "95.167.109.125:61336",
"addr" : "208.48.253.233:2379",
"addr" : "50.148.195.160:62964",
"addr" : "209.173.116.103:55577",
"addr" : "125.16.73.46:52926",
"addr" : "68.98.232.190:62044",
"addr" : "50.186.104.112:42524",
....
What about the peers with the port not matching 19118?
Does this matter?
I have 37 peers, all with version:60006, and subver:/ECCoin:0.7.2/
"addr" : "192.99.141.216:19118",
"addr" : "38.93.234.100:19118",
"addr" : "199.48.164.89:19118",
"addr" : "101.165.201.96:19118",
"addr" : "173.62.236.4:19118",
"addr" : "188.226.169.29:19118",
"addr" : "24.47.189.169:19118",
"addr" : "129.21.137.178:19118",
"addr" : "50.47.54.210:19118",
"addr" : "72.208.65.226:19118",
"addr" : "24.184.168.36:64013",
"addr" : "114.33.166.215:52642",
"addr" : "50.77.240.42:36791",
"addr" : "95.167.109.125:61336",
"addr" : "208.48.253.233:2379",
"addr" : "50.148.195.160:62964",
"addr" : "209.173.116.103:55577",
"addr" : "125.16.73.46:52926",
"addr" : "68.98.232.190:62044",
"addr" : "50.186.104.112:42524",
....
What about the peers with the port not matching 19118?
Does this matter?
Did you try a simple closing of the wallet and then restart it again? This some times helps
Did all the steps you adviced but still have the same problem.
I have 37 peers, all with version:60006, and subver:/ECCoin:0.7.2/
"addr" : "192.99.141.216:19118",
"addr" : "38.93.234.100:19118",
"addr" : "199.48.164.89:19118",
"addr" : "101.165.201.96:19118",
"addr" : "173.62.236.4:19118",
"addr" : "188.226.169.29:19118",
"addr" : "24.47.189.169:19118",
"addr" : "129.21.137.178:19118",
"addr" : "50.47.54.210:19118",
"addr" : "72.208.65.226:19118",
"addr" : "24.184.168.36:64013",
"addr" : "114.33.166.215:52642",
"addr" : "50.77.240.42:36791",
"addr" : "95.167.109.125:61336",
"addr" : "208.48.253.233:2379",
"addr" : "50.148.195.160:62964",
"addr" : "209.173.116.103:55577",
"addr" : "125.16.73.46:52926",
"addr" : "68.98.232.190:62044",
"addr" : "50.186.104.112:42524",
....
What about the peers with the port not matching 19118?
Does this matter?
I have 37 peers, all with version:60006, and subver:/ECCoin:0.7.2/
"addr" : "192.99.141.216:19118",
"addr" : "38.93.234.100:19118",
"addr" : "199.48.164.89:19118",
"addr" : "101.165.201.96:19118",
"addr" : "173.62.236.4:19118",
"addr" : "188.226.169.29:19118",
"addr" : "24.47.189.169:19118",
"addr" : "129.21.137.178:19118",
"addr" : "50.47.54.210:19118",
"addr" : "72.208.65.226:19118",
"addr" : "24.184.168.36:64013",
"addr" : "114.33.166.215:52642",
"addr" : "50.77.240.42:36791",
"addr" : "95.167.109.125:61336",
"addr" : "208.48.253.233:2379",
"addr" : "50.148.195.160:62964",
"addr" : "209.173.116.103:55577",
"addr" : "125.16.73.46:52926",
"addr" : "68.98.232.190:62044",
"addr" : "50.186.104.112:42524",
....
What about the peers with the port not matching 19118?
Does this matter?
stuck on block 77049. using the .conf file you have in the OP.
noted. i will look into this now. i have herd this same response from another personEDIT: i see the problem and i can fix it tomorrow when i get home, when i fix it, i will also ask people to remove all of the addnodes from the .conf as they will no longer be used and will actually cause problems in the future
Deleted all files in Roaming\ECCoin and used the new conf file but still stuck on block 77049
What can i do? Wait for version 1.8.3?
if you could join IRC node in the channel #ECCoin i am in there and can help you resolve this problem.
if you want to try and resolve this problem on your own. then here is what you should do.
delete everything but the .conf and wallet.dat. this includes deleting peers.dat. then restart the client. it will take hours for the client to sync because of the multiple forks that i had to fix. if open your wallet and click help > debug window > console > and enter the command "getpeerinfo" without the " ". you should see these as two of your peers:
"addr" : "192.99.141.216:19118",
and "addr" : "38.93.234.100:19118",
in the list somewhere. if they are in the list then you are connected to the healthy nodes and you just have to wait a few hours (maybe more depending on your cpu and internet connection speed) for the incorrect chains to be sifted through and the correct one to be found and downloaded.
stuck on block 77049. using the .conf file you have in the OP.
noted. i will look into this now. i have herd this same response from another personEDIT: i see the problem and i can fix it tomorrow when i get home, when i fix it, i will also ask people to remove all of the addnodes from the .conf as they will no longer be used and will actually cause problems in the future
Deleted all files in Roaming\ECCoin and used the new conf file but still stuck on block 77049
What can i do? Wait for version 1.8.3?
Could you check TX ID: 1defcaefa1383355e56d4d95d2fb5d317fcc4a59d59799dd62aed9f732b9432c
Shows as successful at the exchange but do not see the deposit into my wallet.
is there a way to clear all the unconfirmed record from the client.Shows as successful at the exchange but do not see the deposit into my wallet.
its just annoying , to see a record of the coins i didn't get -
all of june and july ,
apart from that minor moan thing
you done a job there sir - nice work
OKay everyone, our first exchange has fixed it source for ECC. Comkort is now on the correct source and you are able to trade there without any problems. happy trading 
i have moved in to my new apartment so i am just checking in. i haven't finished unpacking most of my stuff so until i do i will only be checking in periodically. im glad to see no major problems have developed while i was away, lets keep this coin moving! (i will be setting up a multipool later for it)
Could you check TX ID: 1defcaefa1383355e56d4d95d2fb5d317fcc4a59d59799dd62aed9f732b9432c
Shows as successful at the exchange but do not see the deposit into my wallet.
Shows as successful at the exchange but do not see the deposit into my wallet.
Hello, I have put it in our blockexplorer....but there are a lot of transactions in that TX.
Maybe you can verify it for yourself http://38.93.234.101:8080/tx/1defcaefa1383355e56d4d95d2fb5d317fcc4a59d59799dd62aed9f732b9432c
Could you check TX ID: 1defcaefa1383355e56d4d95d2fb5d317fcc4a59d59799dd62aed9f732b9432c
Shows as successful at the exchange but do not see the deposit into my wallet.
Shows as successful at the exchange but do not see the deposit into my wallet.
my wallets is staking millions but they always come out unconfirmed micheal i have PM still waiting on your response i only get a few thousand but i generated all these orphans with millions on them i am not on a fork these are current days
if the block you staked is orphaned it isnt a big deal. it gets orphaned, the coins dont count as staked, and they will stake themsevles again at a later time automatically. what you ear from stake will only be a small % of the number of coins that was actually staked. if you are on the right chain you have nothing to worry about. your coins will come out of stake by themselves about 35 to 40 minutes after the stake has started (50 blocks) 219949 is the current block at the time of this post in case you want to double check your wallet.
my wallets is staking millions but they always come out unconfirmed micheal i have PM still waiting on your response i only get a few thousand but i generated all these orphans with millions on them i am not on a fork these are current days
PM send
my wallets is staking millions but they always come out unconfirmed micheal i have PM still waiting on your response i only get a few thousand but i generated all these orphans with millions on them i am not on a fork these are current days
Exchange 24h trade volumes.
Swisscex - Volume: 0.00059340 BTC
Comkort - Volume: 0 BTC
Allcoin - Volume: 0.1829 LTC
Time to start up the engine guys and promote this coin again?
Swisscex - Volume: 0.00059340 BTC
Comkort - Volume: 0 BTC
Allcoin - Volume: 0.1829 LTC
Time to start up the engine guys and promote this coin again?
we are waiting on the exchanges to get back to us about updating there source so that they arent operating on a false fork of the network. please wait until we confirm them before trading with them. (you can check confirmation status in the first post
1ac178b39c11672e6e4c2d162d565f7a4790410035195dd9980ff99038c95a83
what's this?
what's this?
that block is orphaned. it isnt an error, it happens. no big deal
1ac178b39c11672e6e4c2d162d565f7a4790410035195dd9980ff99038c95a83
what's this?
what's this?
Hallo,
That is a block that was resolved before you could send it, there are no confirmations for it. That happens some times, but looking to the date, it is possible that you where on a fork.
These things happen and it's no problem. Your wallet doesn't count that as stake received, and will try to solve others to receive the stake that you entitled to.
1ac178b39c11672e6e4c2d162d565f7a4790410035195dd9980ff99038c95a83
what's this?
what's this?
Exchange 24h trade volumes.
Swisscex - Volume: 0.00059340 BTC
Comkort - Volume: 0 BTC
Allcoin - Volume: 0.1829 LTC
Time to start up the engine guys and promote this coin again?
Swisscex - Volume: 0.00059340 BTC
Comkort - Volume: 0 BTC
Allcoin - Volume: 0.1829 LTC
Time to start up the engine guys and promote this coin again?
Hi all,
I've setup a test block explorer available here:
http://38.93.234.101:8080/chain/ECCoin
If anyone notices anything odd with it please let me know.
If all seems ok I'll try and make it prettier and hosted on a memorable url
I've setup a test block explorer available here:
http://38.93.234.101:8080/chain/ECCoin
If anyone notices anything odd with it please let me know.
If all seems ok I'll try and make it prettier and hosted on a memorable url
okay guys. i am moving tonight so i have to pack up and get ready. the next time i will be online will probably be saturday after i get to the new place and unpack. see you all in a few days. (might have time to check in from my phone)
Code:
int64 GetProofOfStakeReward(int64 nCoinAge, unsigned int nBits, unsigned int nTime, int nHeight)
{
int64 nRewardCoinYear;
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE;
if(nHeight < 250000)
nRewardCoinYear = 2.5 * MAX_MINT_PROOF_OF_STAKE;
else if(nHeight > 250000)
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE / 10;
int64 nSubsidy = nCoinAge * nRewardCoinYear / 365;
{
int64 nRewardCoinYear;
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE;
if(nHeight < 250000)
nRewardCoinYear = 2.5 * MAX_MINT_PROOF_OF_STAKE;
else if(nHeight > 250000)
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE / 10;
int64 nSubsidy = nCoinAge * nRewardCoinYear / 365;
Questions about the POS reward code.
MAX_MINT_PROOF_OF_STAKE is 10%, right?
Less 250k blocks 25%/year reward? after that is 1%/year?
Thanks
max mint proof of stake does = 10% yes. we are changing the POS to fork at block 250k to a new rate. the 1% year that is up right now will be changed, that is just a temporary placeholder while we fixed the sync issues (now fixed) and the next wallet will have the real algorithm that i want pos to do which is.
int64 nRewardCoinYear;
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE;
if(nHeight < 250000)
nRewardCoinYear = 2.5 * MAX_MINT_PROOF_OF_STAKE;
else if(nHeight > 250000)
if (nHeight < 14016000)
[# of blocks after 20 years]
{
nRewardCoinYear = (3 * (MAX_MINT_PROOF_OF_STAKE / 10)) - ((nHeight / 700800) * (MAX_MINT_PROOF_OF_STAKE / 100));
[3 % calculation------------------------] - ([# of years-------] * [.1% calculation-------------------])
}
else
{
nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE / 10;
}
which is basically 3% - .1% per year until it hits 1 % (after 20 years)
this will be changed way before block 250k so there is no need to worry about that for now
POW blocks will continue to pay out 1 ECC per block after this change has been put into place
Jump to: