EWBF's CUDA Zcash miner - page 41. | Bitcointalksearch.org

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: ljconstructionpa on October 31, 2017, 10:17:07 PM

how do i get the power usuage of gpu to display?

--pec on the command line.

I think --pec 1 also works, or perhaps is needed.

"stratum subscribe timeout" sounds like you have an ISP issue, or the network interface on your mining rig died.
Could be an issue on the pool you're using though.

Windows update, ESPECIALLY ON WINDOWS 10, is notorious for BREAKING MINERS by forcing upgrades to drivers that often don't WORK.
It's one of the reasons I vastly prefer LINUX for dedicated mining rigs.

wudafuxup

full member

Activity: 391

Merit: 105

Quote from: Southy on October 31, 2017, 11:49:33 AM

Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.

The card should be fine. It simply has more cuda cores and different frequency ranges. The memory will remain GDDR5 just like the 1060 and 1070 (won't have the GDDR5X the 1080 and 1080ti have).

Southy

newbie

Activity: 23

Merit: 0

Quote from: QuintLeo on October 31, 2017, 04:25:30 PM

Quote from: Southy on October 31, 2017, 11:49:33 AM

Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.

There is no way to know for 100% sure before it's tried - but there is also no reason to believe that this miner won't work well on the 1070 ti, since there are no major changes in the basic architecture of the GPU that would cause issues.

Ask again in about a week, when folks that pre-ordered 1070ti start getting their cards and have a chance to put them in machines.

Thank you appreciate it.

SantoMacias

newbie

Activity: 10

Merit: 0

My problem started 30 minutes ago.
I have this error: Stratum suscribe timeout

GustETH

newbie

Activity: 19

Merit: 0

since yesterday I have seen that my rigs have stopped working, stop recognizing 1 gpu (rig 6 x 1070) and in the EWBF the NVML error appears. Temperature monitor will not work!
CUDA: Sevice: 0 Thread exited with code: 46

Could it be some windows update? Someone has been the same?
please help - sorry for my enghish

jpl

member

Activity: 154

Merit: 11

Quote from: Kstudio on October 31, 2017, 10:43:24 PM

Has anyone been able to contact ewbf?

https://forum.z.cash/t/zcash4win-beta-is-out/14155/706

looks like he is over here

Kstudio

newbie

Activity: 40

Merit: 0

Has anyone been able to contact ewbf?

ljconstructionpa

full member

Activity: 234

Merit: 100

how do i get the power usuage of gpu to display?

jpl

member

Activity: 154

Merit: 11

Quote from: shibob on October 31, 2017, 12:23:56 AM

Quote from: jpl on October 30, 2017, 11:29:58 PM

Quote from: majorlee on October 30, 2017, 03:37:51 PM

anyone having issues with latest nvidia drivers?

Version 388.00 for GTX 1070 working fine.

Any improvement on hashrate with driver ver.388.00?

My rate is higher, but I'm not sure if it's my settings in Afterburner or not,.. since I'm messing with that a lot.
.. ok testing still...

Afterburner
core 0
power limit 102
temp limit 74 (ewbf say's 68C and one higher at 71C and it's text is orange, so I don't think I'll go higher)
core clock 155
mem clock 660
fan is at 59

1917 Sols/s with 4 1070's now

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: InvisibleNinja on October 30, 2017, 07:42:13 PM

INFO 20:25:28: GPU0 Accepted share 141ms [A:48, R:0] \\ if this shows up does that mean i got 48 shares or just one

IT MEANS YOU HAVE A RUNNING TOTAL OF 48 SHARES FROM GPU0--

You have just been credited for your 48th share, with no rejects. The "A" stands for "Accepted", the "R" stands for "Rejected", and they both represent the current total for each, respectively, found by GPU0.

--scryptr

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: Southy on October 31, 2017, 11:49:33 AM

Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.

There is no way to know for 100% sure before it's tried - but there is also no reason to believe that this miner won't work well on the 1070 ti, since there are no major changes in the basic architecture of the GPU that would cause issues.

Ask again in about a week, when folks that pre-ordered 1070ti start getting their cards and have a chance to put them in machines.

Southy

newbie

Activity: 23

Merit: 0

Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.

mrok

newbie

Activity: 45

Merit: 0

it works well for me, great job dev!

ArtPt

member

Activity: 61

Merit: 10

Good miner. All my 1060/1080 cards works like a charm at pretty decent speed. Thanks to the dev!

anyreason.ua

newbie

Activity: 9

Merit: 0

How can I remove reconnecting to pool after "connection lost" message ?

shibob

full member

Activity: 672

Merit: 154

Blockchain Evangelist.

Quote from: jpl on October 30, 2017, 11:29:58 PM

Quote from: majorlee on October 30, 2017, 03:37:51 PM

anyone having issues with latest nvidia drivers?

Version 388.00 for GTX 1070 working fine.

Any improvement on hashrate with driver ver.388.00?

jpl

member

Activity: 154

Merit: 11

Quote from: majorlee on October 30, 2017, 03:37:51 PM

anyone having issues with latest nvidia drivers?

Version 388.00 for GTX 1070 working fine.

ZukoS

newbie

Activity: 1

Merit: 0

How to use network proxy to connect to pool on Linux?

InvisibleNinja

newbie

Activity: 1

Merit: 0

INFO 20:25:28: GPU0 Accepted share 141ms [A:48, R:0] \\ if this shows up does that mean i got 48 shares or just one

majorlee

full member

Activity: 134

Merit: 100

First DJ to play gigs for Bitcoin & Crypto Guru

anyone having issues with latest nvidia drivers?

Topic: EWBF's CUDA Zcash miner - page 41. (Read 2164327 times)