Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 24.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: fluxy12 on April 30, 2018, 11:07:10 AM

Quote from: UnclWish on April 30, 2018, 05:04:18 AM

Quote from: fluxy12 on April 30, 2018, 01:20:55 AM

Quote from: UnclWish on April 29, 2018, 01:51:27 PM

Quote from: fluxy12 on April 29, 2018, 01:42:14 PM

Quote from: UnclWish on April 29, 2018, 01:34:07 PM

Quote from: fluxy12 on April 29, 2018, 12:53:15 PM

Hello, no it is not Hynix it is Samsung, yes all armor 8Gb.

To get this results i buyed this bios : https://mining-bios.eu/product/mining-bios-msi-rx-580-armor-8gb-samsung-hynix-performance-timings-652/

I have 2 mines with Hynix f ucking memories and i cannot get this results, i think that memory is just bad The better i can get is 830Mh/s ... big difference with Samsung, but they only consume 95W at wall. If anyone can get better results please help us !

Can you share hynix 1750-2250 strap from this bios? I want to take look on it... Maybe you use wrong clocks/settings?

Hello UnclWish here it is, my hynix straps :

777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

Thanks. It's usual "GOOD" strap fro hynix mjr memory. It's easely can be found it net. On 2125-2150MHz memory clock it gives 30-30,5M eth speed, but for cryptonight it useless.
Try this strap:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16

It doctor83 strap from theme about his miner. Use 2100-2150MHz memory clock for it.

Hello UncWich, thank you my hashrate with this straps is better now i get 915 mh/s, it is still far from the 1020mh/s on the samsung memories, do you get 1000+ with Hynix ?

No, 1kH/s I can't recieve. But close to.
Use 1250MHz core clock, 2150MHz memory clock (better 2175MHz if works stable).
In GGS set intensity 128 or 144.

Hello, tryied this settings but the rig glitch and freeze (it was doing 940mh/s thats good too), how much memory and core voltage do you use for these parameters ?

As for the question about consuption, on my samsung rigs they do 115W at Wall for 1020Mh/S per rx 580 card

1st - you're must be sure that your card have 8Gb hynix mjr memory.
2nd - if on 2150MHz memory clock your rig glitch and freeze, then try 2100MHz memory clock. Low quality cards and cards with bad memory cooling may not normal work even on 2100MHz with these strap. If your card is the same, try 2075MHz memory clock.
Use 1250 core clock with 1000mV and 950mV memory voltage.

DrX

member

Activity: 233

Merit: 20

Quote from: zawawa on April 30, 2018, 12:30:27 PM

Quote from: DrX on April 30, 2018, 12:28:53 PM

Quote from: zawawa on April 30, 2018, 12:20:05 PM

Quote from: DrX on April 30, 2018, 12:18:22 PM

User becomes active in mph if i pause the miner, not sure if i really get any shares.

I think there is a problem with your Internet connection.
Are you using a proxy by any chance?

No proxy,

but i think the miner works now. I might have been too impatient. Grin

But the miner keeps changing server between US and Europe.

Do you live in Australia or Africa? Otherwise, this shouldn't be happening...

Scandinavia

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: DrX on April 30, 2018, 12:28:53 PM

Quote from: zawawa on April 30, 2018, 12:20:05 PM

Quote from: DrX on April 30, 2018, 12:18:22 PM

User becomes active in mph if i pause the miner, not sure if i really get any shares.

I think there is a problem with your Internet connection.
Are you using a proxy by any chance?

No proxy,

but i think the miner works now. I might have been too impatient. Grin

But the miner keeps changing server between US and Europe.

Do you live in Australia or Africa? Otherwise, this shouldn't be happening...

DrX

member

Activity: 233

Merit: 20

Quote from: zawawa on April 30, 2018, 12:20:05 PM

Quote from: DrX on April 30, 2018, 12:18:22 PM

User becomes active in mph if i pause the miner, not sure if i really get any shares.

I think there is a problem with your Internet connection.
Are you using a proxy by any chance?

No proxy,

but i think the miner works now. I might have been too impatient. Grin

But the miner keeps changing server between US and Europe.

WhyMe

sr. member

Activity: 661

Merit: 250

Quote from: zawawa on April 30, 2018, 11:48:25 AM

Quote from: WhyMe on April 30, 2018, 11:37:19 AM

What are the values we need to play first in custom memory timings ? Thanks

That's hard to say. The safest bet is to run the miner at a memory clock rate *lower* than the default one and capture the timings *while the miner is running.* For example, if the stock memory clock rate is 2000 Mhz, you could try 1750Mhz or 1625Mhz. Alternatively, you could try an existing strap for your memory vendor, but that's rather tricky.

Once you have a working set of memory timings, then you should try to zero out TFAW and T32AW to see if that would work. You could also lower TRRD. An important thing to note is that the automatic optimizer would not touch these three parameters, so you need to experiment yourself. Generally speaking, Samsung GDDR5 is quite happy with TFAW=0 and T32AW=0, whereas you need to raise T32AW slightly for Hynix.

Will try to play with TFAW, T32AW and TRRD, thanks

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: DrX on April 30, 2018, 12:18:22 PM

User becomes active in mph if i pause the miner, not sure if i really get any shares.

I think there is a problem with your Internet connection.
Are you using a proxy by any chance?

DrX

member

Activity: 233

Merit: 20

User becomes active in mph if i pause the miner, not sure if i really get any shares.

UPDATE: it might work now.

DrX

member

Activity: 233

Merit: 20

Quote from: zawawa on April 30, 2018, 11:25:20 AM

This isn't good... Could I see your log?
As for server selection, it should be pretty reasonable now.
Where do you live, and which server did you get?

Quote from: DrX on April 30, 2018, 11:21:44 AM

Quote from: zawawa on April 30, 2018, 09:55:00 AM

Quote from: Brixnmorta on April 30, 2018, 09:48:55 AM

Quote from: zawawa on April 30, 2018, 08:36:24 AM

Quote from: Brixnmorta on April 30, 2018, 08:04:13 AM

I've been watching this project with interest, it looks very interesting so I decided to take the plunge to mine Eth. I have 9 RX 580 8Gb Armor OC cards. I get around 253-255 MH/s on Claymore Dual 11.x so I'm running the optimisation now to compare. One small UI request, the order of the tabs at the top is Benchmarking to the left of Optimisation. However the order of the buttons at the bottom is the reverse. Please could you reverse the bottom buttons to match the tab order, lt is less confusing? Thanks.

Never thought of that... I will fix it.

Thank you!

I have a small problem configuring the Custom Pools for MPH. I have put europe.ethash-hub.miningpoolhub.com in the host field, 20535 as the port then my MPH username.worker in the Login and x as the password. I have ticked Use Custom Pools on the Compute tab. I get the following error when I try to start mining:

2018-04-30 15:40:55.8608 [4] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 15:40:55.8608 [4] Reconnecting to the server...
2018-04-30 15:41:03.7210 [1] Stopping miners...

Any clues on how to troubleshoot?

Mining Pool Hub does things differently for some reason... It is one of the default pools, though.
Did you try it as a default pool? Just move up Mining Pool Hub on the pool list and enter your username
under "Pool Parameters."

I cant see any hashrate on workers page or in graph page on mph and the workers isn't active.

Everything seems to work on GGS thought, i get shares and GGS shows 28Mh/a on RX480 (Ethash). Is that normal?
Hashrate is same with claymore.

And could you add location selection, so it would choose closest server on mph?

Code:

2018-04-30 19:42:05.2531 [1] Gateless Gate Sharp 1.3.7 alpha started.
2018-04-30 19:42:06.6213 [1] Number of Devices: 4
2018-04-30 19:42:06.7733 [1] Successfully initialized AMD Display Library.
2018-04-30 19:42:06.7733 [1] Number of ADL Adapters: 24
2018-04-30 19:42:06.7823 [1] AMD Driver Version: 17.30.1029-170727a-316522E-CrimsonReLive
2018-04-30 19:42:16.9073 [1] Failed to initialize NVIDIA Management Library.
2018-04-30 19:42:19.5975 [1] Loading settings from C:\Users\USER\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.json...
2018-04-30 19:42:20.0946 [1] Loaded settings.
2018-04-30 19:42:23.1639 [11] Exception: The request was aborted: Could not create SSL/TLS secure channel.
2018-04-30 19:42:23.1639 [11]     Member:      Task_UpdateLatestReleaseInfo
2018-04-30 19:42:23.1639 [11]     Source File: D:\GitHub\GatelessGateSharp\GatelessGateSharp\MainForm.cs
2018-04-30 19:42:23.1639 [11]     Line Number: 6593
2018-04-30 19:42:23.1659 [11]     StackTrace:     at System.Net.HttpWebRequest.GetResponse()
   at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy)
   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)
   at System.Xml.XmlTextReaderImpl.FinishInitUriString()
   at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)
   at GatelessGateSharp.MainForm.Task_UpdateLatestReleaseInfo(Object cancellationToken)
2018-04-30 19:42:23.9040 [13] Running garbage collection...
2018-04-30 19:42:23.9040 [13] Memory used before collection: 19MB
2018-04-30 19:42:23.9440 [13] Memory used before collection: 7MB
2018-04-30 19:42:24.9801 [15] API Listener started.
2018-04-30 19:42:50.7537 [1] Saving settings to C:\Users\USER\AppData\Roaming\GatelessGateSharp\GatelessGateSharp.json...
2018-04-30 19:42:50.7797 [1] graph_type
2018-04-30 19:42:50.7797 [1] graph_coverage
2018-04-30 19:42:50.7797 [1] default_algorithm
2018-04-30 19:42:50.7797 [1] custom_pool1_secondary_algorithm
2018-04-30 19:42:50.7797 [1] custom_pool1_algorithm
2018-04-30 19:42:50.7797 [1] custom_pool2_secondary_algorithm
2018-04-30 19:42:50.7797 [1] custom_pool2_algorithm
2018-04-30 19:42:50.7797 [1] custom_pool3_secondary_algorithm
2018-04-30 19:42:50.7807 [1] custom_pool3_algorithm
2018-04-30 19:42:50.7807 [1] custom_pool0_secondary_algorithm
2018-04-30 19:42:50.7807 [1] custom_pool0_algorithm
2018-04-30 19:42:50.7807 [1] device_settings_device
2018-04-30 19:42:50.7807 [1] device_settings_algorithm
2018-04-30 19:42:50.7807 [1] benchmarking_first_parameter_parameter
2018-04-30 19:42:50.7807 [1] benchmarking_second_parameter_parameter
2018-04-30 19:42:50.7807 [1] optimizer_approac
2018-04-30 19:42:50.7807 [1] currency
2018-04-30 19:42:51.0117 [1] Saved settings to JSON configuration file.
2018-04-30 19:42:51.0997 [1] Launching Ethash miners for Mining Pool Hub...
2018-04-30 19:42:52.9049 [18] Received new job: 3e8f
2018-04-30 19:42:53.3299 [19] Miner thread for Device #0 started.
2018-04-30 19:42:53.3509 [19] Loaded Kernels\ethash.cl for Device #0.
2018-04-30 19:42:54.9371 [20] Miner thread for Device #1 started.
2018-04-30 19:42:54.9381 [19] Built ethash program for Device #0.
2018-04-30 19:42:54.9381 [20] Loaded Kernels\ethash.cl for Device #1.
2018-04-30 19:42:54.9451 [19] Build options: -O1 -IKernels -DWORKSIZE=192
2018-04-30 19:42:56.1652 [20] Built ethash program for Device #1.
2018-04-30 19:42:56.1652 [20] Build options: -O1 -IKernels -DWORKSIZE=192
2018-04-30 19:42:57.8264 [21] Miner thread for Device #2 started.
2018-04-30 19:42:57.8324 [21] Loaded Kernels\ethash.cl for Device #2.
2018-04-30 19:42:59.8286 [22] Miner thread for Device #3 started.
2018-04-30 19:42:59.8376 [22] Loaded Kernels\ethash.cl for Device #3.
2018-04-30 19:42:59.8586 [21] Built ethash program for Device #2.
2018-04-30 19:42:59.8586 [21] Build options: -O1 -IKernels -DWORKSIZE=192
2018-04-30 19:43:00.0756 [18] Received new job: 3e90
2018-04-30 19:43:01.3027 [22] Built ethash program for Device #3.
2018-04-30 19:43:01.3027 [22] Build options: -O1 -IKernels -DWORKSIZE=192
2018-04-30 19:43:27.1493 [18] Received new job: 3e91
2018-04-30 19:43:30.6006 [19] Generated DAG cache for Epoch #184 (35450ms).
2018-04-30 19:43:34.4100 [20] Generated DAG cache for Epoch #184 (33206ms).
2018-04-30 19:43:35.1431 [18] Received new job: 3e92
2018-04-30 19:43:37.3853 [18] Received new job: 3e93
2018-04-30 19:43:38.7935 [21] Generated DAG cache for Epoch #184 (33832ms).
2018-04-30 19:43:41.6308 [22] Generated DAG cache for Epoch #184 (35170ms).
2018-04-30 19:43:49.6296 [20] Generated DAG for Epoch #184 (11948ms).
2018-04-30 19:43:51.3287 [21] Generated DAG for Epoch #184 (11814ms).
2018-04-30 19:43:51.6157 [19] Generated DAG for Epoch #184 (14030ms).
2018-04-30 19:43:54.2030 [22] Generated DAG for Epoch #184 (11876ms).
2018-04-30 19:43:59.6896 [20] Device #1 (Ethash): 27.50 Mh/s
2018-04-30 19:44:01.4167 [21] Device #2 (Ethash): 27.39 Mh/s
2018-04-30 19:44:01.6738 [19] Device #0 (Ethash): 27.48 Mh/s
2018-04-30 19:44:04.2650 [22] Device #3 (Ethash): 27.45 Mh/s
2018-04-30 19:44:08.9635 [18] Received new job: 3e94
2018-04-30 19:44:09.7366 [20] Device #1 (Ethash): 27.49 Mh/s
2018-04-30 19:44:11.5057 [21] Device #2 (Ethash): 27.41 Mh/s
2018-04-30 19:44:11.7238 [19] Device #0 (Ethash): 27.49 Mh/s
2018-04-30 19:44:13.8780 [18] Received new job: 3e95
2018-04-30 19:44:14.3320 [22] Device #3 (Ethash): 27.49 Mh/s
2018-04-30 19:44:19.7966 [20] Device #1 (Ethash): 27.35 Mh/s
2018-04-30 19:44:21.6167 [21] Device #2 (Ethash): 27.39 Mh/s
2018-04-30 19:44:21.7828 [19] Device #0 (Ethash): 27.28 Mh/s
2018-04-30 19:44:24.3790 [22] Device #3 (Ethash): 27.49 Mh/s
2018-04-30 19:44:29.8576 [20] Device #1 (Ethash): 27.49 Mh/s
2018-04-30 19:44:31.7248 [21] Device #2 (Ethash): 27.30 Mh/s
2018-04-30 19:44:31.8488 [19] Device #0 (Ethash): 27.48 Mh/s
2018-04-30 19:44:34.2300 [18] Received new job: 3e96
2018-04-30 19:44:34.4590 [22] Device #3 (Ethash): 27.36 Mh/s
2018-04-30 19:44:37.3093 [22] Device #3 submitted Share #0 to europe.ethash-hub.miningpoolhub.com as USER.480.2.
2018-04-30 19:44:37.3773 [18] Share #0 accepted.
2018-04-30 19:44:38.0694 [18] Received new job: 3e97
2018-04-30 19:44:39.9126 [20] Device #1 (Ethash): 27.49 Mh/s
2018-04-30 19:44:41.7988 [21] Device #2 (Ethash): 27.45 Mh/s
2018-04-30 19:44:41.9018 [19] Device #0 (Ethash): 27.50 Mh/s
2018-04-30 19:44:44.2220 [18] Received new job: 3e98
2018-04-30 19:44:44.5280 [22] Device #3 (Ethash): 27.49 Mh/s
2018-04-30 19:44:49.9846 [20] Device #1 (Ethash): 27.48 Mh/s
2018-04-30 19:44:51.8908 [21] Device #2 (Ethash): 27.14 Mh/s
2018-04-30 19:44:51.9518 [19] Device #0 (Ethash): 27.48 Mh/s
2018-04-30 19:44:54.6491 [22] Device #3 (Ethash): 27.50 Mh/s
2018-04-30 19:45:00.0556 [20] Device #1 (Ethash): 27.47 Mh/s
2018-04-30 19:45:01.9648 [21] Device #2 (Ethash): 27.47 Mh/s
2018-04-30 19:45:02.0088 [19] Device #0 (Ethash): 27.49 Mh/s
2018-04-30 19:45:04.7161 [22] Device #3 (Ethash): 27.49 Mh/s
2018-04-30 19:45:09.2365 [19] Device #0 submitted Share #1 to europe.ethash-hub.miningpoolhub.com as USER.480.2.
2018-04-30 19:45:09.3165 [18] Share #1 accepted.
2018-04-30 19:45:10.1106 [20] Device #1 (Ethash): 27.49 Mh/s
2018-04-30 19:45:12.0708 [21] Device #2 (Ethash): 27.46 Mh/s
2018-04-30 19:45:12.0768 [19] Device #0 (Ethash): 27.48 Mh/s
2018-04-30 19:45:14.7691 [22] Device #3 (Ethash): 27.48 Mh/s
2018-04-30 19:45:18.1964 [1] Stopping miners...
2018-04-30 19:45:18.5274 [1] Stopped miners.

Server seems to be good now, earlier it was US.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: WhyMe on April 30, 2018, 11:37:19 AM

What are the values we need to play first in custom memory timings ? Thanks

That's hard to say. The safest bet is to run the miner at a memory clock rate *lower* than the default one and capture the timings *while the miner is running.* For example, if the stock memory clock rate is 2000 Mhz, you could try 1750Mhz or 1625Mhz. Alternatively, you could try an existing strap for your memory vendor, but that's rather tricky.

Once you have a working set of memory timings, then you should try to zero out TFAW and T32AW to see if that would work. You could also lower TRRD. An important thing to note is that the automatic optimizer would not touch these three parameters, so you need to experiment yourself. Generally speaking, Samsung GDDR5 is quite happy with TFAW=0 and T32AW=0, whereas you need to raise T32AW slightly for Hynix.

WhyMe

sr. member

Activity: 661

Merit: 250

What are the values we need to play first in custom memory timings ? Thanks

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

This isn't good... Could I see your log?
As for server selection, it should be pretty reasonable now.
Where do you live, and which server did you get?

Quote from: DrX on April 30, 2018, 11:21:44 AM

Quote from: zawawa on April 30, 2018, 09:55:00 AM

Quote from: Brixnmorta on April 30, 2018, 09:48:55 AM

Quote from: zawawa on April 30, 2018, 08:36:24 AM

Quote from: Brixnmorta on April 30, 2018, 08:04:13 AM

I've been watching this project with interest, it looks very interesting so I decided to take the plunge to mine Eth. I have 9 RX 580 8Gb Armor OC cards. I get around 253-255 MH/s on Claymore Dual 11.x so I'm running the optimisation now to compare. One small UI request, the order of the tabs at the top is Benchmarking to the left of Optimisation. However the order of the buttons at the bottom is the reverse. Please could you reverse the bottom buttons to match the tab order, lt is less confusing? Thanks.

Never thought of that... I will fix it.

Thank you!

I have a small problem configuring the Custom Pools for MPH. I have put europe.ethash-hub.miningpoolhub.com in the host field, 20535 as the port then my MPH username.worker in the Login and x as the password. I have ticked Use Custom Pools on the Compute tab. I get the following error when I try to start mining:

2018-04-30 15:40:55.8608 [4] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 15:40:55.8608 [4] Reconnecting to the server...
2018-04-30 15:41:03.7210 [1] Stopping miners...

Any clues on how to troubleshoot?

Mining Pool Hub does things differently for some reason... It is one of the default pools, though.
Did you try it as a default pool? Just move up Mining Pool Hub on the pool list and enter your username
under "Pool Parameters."

I cant see any hashrate on workers page or in graph page on mph and the workers isn't active.

Everything seems to work on GGS thought, i get shares and GGS shows 28Mh/a on RX480 (Ethash). Is that normal?
Hashrate is same with claymore.

And could you add location selection, so it would choose closest server on mph?

DrX

member

Activity: 233

Merit: 20

Quote from: zawawa on April 30, 2018, 09:55:00 AM

Quote from: Brixnmorta on April 30, 2018, 09:48:55 AM

Quote from: zawawa on April 30, 2018, 08:36:24 AM

Quote from: Brixnmorta on April 30, 2018, 08:04:13 AM

I've been watching this project with interest, it looks very interesting so I decided to take the plunge to mine Eth. I have 9 RX 580 8Gb Armor OC cards. I get around 253-255 MH/s on Claymore Dual 11.x so I'm running the optimisation now to compare. One small UI request, the order of the tabs at the top is Benchmarking to the left of Optimisation. However the order of the buttons at the bottom is the reverse. Please could you reverse the bottom buttons to match the tab order, lt is less confusing? Thanks.

Never thought of that... I will fix it.

Thank you!

I have a small problem configuring the Custom Pools for MPH. I have put europe.ethash-hub.miningpoolhub.com in the host field, 20535 as the port then my MPH username.worker in the Login and x as the password. I have ticked Use Custom Pools on the Compute tab. I get the following error when I try to start mining:

2018-04-30 15:40:55.8608 [4] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 15:40:55.8608 [4] Reconnecting to the server...
2018-04-30 15:41:03.7210 [1] Stopping miners...

Any clues on how to troubleshoot?

Mining Pool Hub does things differently for some reason... It is one of the default pools, though.
Did you try it as a default pool? Just move up Mining Pool Hub on the pool list and enter your username
under "Pool Parameters."

I cant see any hashrate on workers page or in graph page on mph and the workers isn't active.

Everything seems to work on GGS thought, i get shares and GGS shows 28Mh/a on RX480 (Ethash). Is that normal?
Hashrate is same with claymore.

And could you add location selection, so it would choose closest server on mph?

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: UnclWish on April 30, 2018, 05:04:18 AM

Quote from: fluxy12 on April 30, 2018, 01:20:55 AM

Quote from: UnclWish on April 29, 2018, 01:51:27 PM

Quote from: fluxy12 on April 29, 2018, 01:42:14 PM

Quote from: UnclWish on April 29, 2018, 01:34:07 PM

Quote from: fluxy12 on April 29, 2018, 12:53:15 PM

Hello, no it is not Hynix it is Samsung, yes all armor 8Gb.

To get this results i buyed this bios : https://mining-bios.eu/product/mining-bios-msi-rx-580-armor-8gb-samsung-hynix-performance-timings-652/

I have 2 mines with Hynix f ucking memories and i cannot get this results, i think that memory is just bad The better i can get is 830Mh/s ... big difference with Samsung, but they only consume 95W at wall. If anyone can get better results please help us !

Can you share hynix 1750-2250 strap from this bios? I want to take look on it... Maybe you use wrong clocks/settings?

Hello UnclWish here it is, my hynix straps :

777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

Thanks. It's usual "GOOD" strap fro hynix mjr memory. It's easely can be found it net. On 2125-2150MHz memory clock it gives 30-30,5M eth speed, but for cryptonight it useless.
Try this strap:
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16

It doctor83 strap from theme about his miner. Use 2100-2150MHz memory clock for it.

Hello UncWich, thank you my hashrate with this straps is better now i get 915 mh/s, it is still far from the 1020mh/s on the samsung memories, do you get 1000+ with Hynix ?

No, 1kH/s I can't recieve. But close to.
Use 1250MHz core clock, 2150MHz memory clock (better 2175MHz if works stable).
In GGS set intensity 128 or 144.

Hello, tryied this settings but the rig glitch and freeze (it was doing 940mh/s thats good too), how much memory and core voltage do you use for these parameters ?

As for the question about consuption, on my samsung rigs they do 115W at Wall for 1020Mh/S per rx 580 card

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Brixnmorta on April 30, 2018, 10:45:36 AM

Quote from: zawawa on April 30, 2018, 10:21:52 AM

You don't have to check "Use custom pools" again.
Just leave it unchecked and you should be good to go.

Ok, done and now working. I think you are saying that MPH shouldn't be configured as a Custom Pool?

On another matter, after I have done the Optimisation, how do I transfer the values to the cards? If I look at the Overclocking section of the Devices tab, it is not pre-populated with the values that have been derived by the optimisation process which is what I was expecting.

One of your cards should have optimized settings now.
Just select that card and click "Copy to Similar Devices."

liomojo1

hero member

Activity: 676

Merit: 500

Quote from: zawawa on April 30, 2018, 08:45:33 AM

Quote from: liomojo1 on April 30, 2018, 06:00:07 AM

6 hours of trying and i gave up , i had to do a system restore to get my machine back . The tool is good it optimizes energy , but this official driver is a pain . Is there a option in your miner to force compute mode , i coudnt find one. I switched to original bios and try the optimize function , but the result in cryptonite-heavy was 500h per card , which is half of what i get . With the modded bios the result was 750h , is there an option to apply your setting of core and mem and voltage or it is applied automatically? After some tweaking , the result was a green screen and a system restore , i think the drivers were keeping the falty settings and crashed the system.. For now I will read more about it and then try again cause the result was bad. With the same settings i make 1000h per card.
Anyway a very good software!!!!!!

Well, my ultimate goal is to have well-optimized default settings for every graphics card out there.
That way, all the user would have to do is to hit the "Boost Performance" button to get the most
out of her or his hardware. I am setting up an "optimization factory" right now in my home office,
much to my beloved wife's dismay. Please come back in a few weeks, and I bet you will see a very different result.

Edit: By the way, did you try the "Boost Performance" button? I got 750 h/s without any optimizations that way.

I am sure it will and I will be checking every day. I just need to read more about hot to get the optimal of it. The idea is superb. The problem with the original driver is that it remembers the last settings and apply them every time the machine boots , I have to read how to avoid this situation at the beginning. The other problem is that atimagpacher is not working very well with the new drivers and there is michmach between the driver and settings and straps . This is my feeling.
Anyway I try the boost button but ended up with a freezing screen and things got bad . I have to make a clean install of drivers and try again . What I noticed is that I got 700h but the whole 6 cards were drawing from the wall only 640 w and using one other miner I get 1000 h but cards draw 760w. So intensity is low!

Brixnmorta

newbie

Activity: 5

Merit: 0

Quote from: zawawa on April 30, 2018, 10:21:52 AM

You don't have to check "Use custom pools" again.
Just leave it unchecked and you should be good to go.

Ok, done and now working. I think you are saying that MPH shouldn't be configured as a Custom Pool?

On another matter, after I have done the Optimisation, how do I transfer the values to the cards? If I look at the Overclocking section of the Devices tab, it is not pre-populated with the values that have been derived by the optimisation process which is what I was expecting.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

You don't have to check "Use custom pools" again.
Just leave it unchecked and you should be good to go.

Brixnmorta

newbie

Activity: 5

Merit: 0

Mining Pool Hub does things differently for some reason... It is one of the default pools, though.
Did you try it as a default pool? Just move up Mining Pool Hub on the pool list and enter your username
under "Pool Parameters."
[/quote]

Hi, are you referring to Pool Priorities and and Pool Parameters on the Default Pools tab? They are greyed, I can't select them. Likewise the Wallet Addresses are all greyed out. MPH is the only pool I have defined so far.

Edit: Ah, I found I had to UNcheck Use Custom Pool on the Compute tab before I could edit the MPH fields. I have moved MPH to the top of Pool priorities, set my MPH username and worker. When I go back to Compute, tick Use Custom Pools I now get this error, it looks as though GGS is typing to connect to a stratum server at MPH, is that correct:

018-04-30 16:15:00.5757 [3] Line Number: 3769
2018-04-30 16:15:00.5757 [3] StackTrace: at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at System.Net.Sockets.TcpListener.Start(Int32 backlog)
at GatelessGateSharp.MainForm.d__162.MoveNext()
2018-04-30 16:15:02.6072 [3] Exception: Only one usage of each socket address (protocol/network address/port) is normally permitted
2018-04-30 16:15:02.6072 [3] Member: Task_APIListener
2018-04-30 16:15:02.6072 [3] Source File: D:\GitHub\GatelessGateSharp\GatelessGateSharp\MainForm.cs
2018-04-30 16:15:02.6072 [3] Line Number: 3769
2018-04-30 16:15:02.6072 [3] StackTrace: at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at System.Net.Sockets.TcpListener.Start(Int32 backlog)
at GatelessGateSharp.MainForm.d__162.MoveNext()
2018-04-30 16:15:02.9978 [1] Stopping miners...
2018-04-30 16:15:03.0135 [11] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0447 [22] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0447 [25] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0447 [26] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0760 [19] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0760 [23] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.0760 [27] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.1072 [20] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.1072 [21] Ethash stratum server failed to send a new job.
2018-04-30 16:15:03.6073 [1] Stopped miners.
2018-04-30 16:15:04.6386 [3] Exception: Only one usage of each socket address (protocol/network address/port) is normally permitted
2018-04-30 16:15:04.6386 [3] Member: Task_APIListener
2018-04-30 16:15:04.6386 [3] Source File: D:\GitHub\GatelessGateSharp\GatelessGateSharp\MainForm.cs
2018-04-30 16:15:04.6386 [3] Line Number: 3769
2018-04-30 16:15:04.6386 [3] StackTrace: at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at System.Net.Sockets.TcpListener.Start(Int32 backlog)
at GatelessGateSharp.MainForm.d__162.MoveNext()
2018-04-30 16:15:05.9826 [17] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 16:15:05.9826 [17] Reconnecting to the server...

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Brixnmorta on April 30, 2018, 09:48:55 AM

Quote from: zawawa on April 30, 2018, 08:36:24 AM

Quote from: Brixnmorta on April 30, 2018, 08:04:13 AM

I've been watching this project with interest, it looks very interesting so I decided to take the plunge to mine Eth. I have 9 RX 580 8Gb Armor OC cards. I get around 253-255 MH/s on Claymore Dual 11.x so I'm running the optimisation now to compare. One small UI request, the order of the tabs at the top is Benchmarking to the left of Optimisation. However the order of the buttons at the bottom is the reverse. Please could you reverse the bottom buttons to match the tab order, lt is less confusing? Thanks.

Never thought of that... I will fix it.

Thank you!

I have a small problem configuring the Custom Pools for MPH. I have put europe.ethash-hub.miningpoolhub.com in the host field, 20535 as the port then my MPH username.worker in the Login and x as the password. I have ticked Use Custom Pools on the Compute tab. I get the following error when I try to start mining:

2018-04-30 15:40:55.8608 [4] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 15:40:55.8608 [4] Reconnecting to the server...
2018-04-30 15:41:03.7210 [1] Stopping miners...

Any clues on how to troubleshoot?

Mining Pool Hub does things differently for some reason... It is one of the default pools, though.
Did you try it as a default pool? Just move up Mining Pool Hub on the pool list and enter your username
under "Pool Parameters."

Brixnmorta

newbie

Activity: 5

Merit: 0

Quote from: zawawa on April 30, 2018, 08:36:24 AM

Quote from: Brixnmorta on April 30, 2018, 08:04:13 AM

I've been watching this project with interest, it looks very interesting so I decided to take the plunge to mine Eth. I have 9 RX 580 8Gb Armor OC cards. I get around 253-255 MH/s on Claymore Dual 11.x so I'm running the optimisation now to compare. One small UI request, the order of the tabs at the top is Benchmarking to the left of Optimisation. However the order of the buttons at the bottom is the reverse. Please could you reverse the bottom buttons to match the tab order, lt is less confusing? Thanks.

Never thought of that... I will fix it.

Thank you!

I have a small problem configuring the Custom Pools for MPH. I have put europe.ethash-hub.miningpoolhub.com in the host field, 20535 as the port then my MPH username.worker in the Login and x as the password. I have ticked Use Custom Pools on the Compute tab. I get the following error when I try to start mining:

2018-04-30 15:40:55.8608 [4] Exception in Stratum.StreamReaderThread(): System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at GatelessGateSharp.OpenEthereumPoolEthashStratum.Authorize()
at GatelessGateSharp.Stratum.StreamReaderThread()
2018-04-30 15:40:55.8608 [4] Reconnecting to the server...
2018-04-30 15:41:03.7210 [1] Stopping miners...

Any clues on how to troubleshoot?

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 24. (Read 214428 times)