Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 28. (Read 214428 times)
Thanks so much my friend, i tryied your config but same result so i suppose it is my gpu's bios fault.
https://postimg.cc/image/sdea0ev8d/
https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
You 570 cards is 8Gb hynix MJR or 4Gb hynix AJR memory?https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
If they are 8Gb hynix MJR than the results as on scrren possible only on Sapphire Nitro+ cards. Because other low end cards with 8Gb hynix MJR memory can't run on 2150-2160MHz memory clock on strap what you're using.
On MSI Gaming X 8Gb with hynix memory max 2100Mhz. So it's speed will be lower and max about 940-950 h/s.
Are your use "GOOD" hynix mjr strap?
Well, you haven't turned on memory timing mods, so... Also, I noticed you are not using the latest version of GGS.
Actually, I prepared only two sets of default values for memory timing mods so far: one for RX 480/580 Samsung GDDR5, and the other is for RX 470/570 Hynix GDDR5. You can find these default settings in the DeviceSettings folder. I will work on other cards tomorrow, so no worries.
Actually, I prepared only two sets of default values for memory timing mods so far: one for RX 480/580 Samsung GDDR5, and the other is for RX 470/570 Hynix GDDR5. You can find these default settings in the DeviceSettings folder. I will work on other cards tomorrow, so no worries.
https://postimg.cc/image/sdea0ev8d/
https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
I don't understand why i am the only m other f ucker in that earth that cannot obtain such results, can i see you "devices" page on GGS please ?
https://postimg.cc/image/sdea0ev8d/
https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
https://s14.postimg.cc/b03zljzxd/Capture.png
RX 570 Hynix : 975-996 h/s
Thanks ,
1.3.7 is stable and fast on opening.
Hello, this is the max speed i can get on RX580 8gb msi armor
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
Well, you can reach much better speeds with overclocking and memory timing mods.
I even got 1000 h/s with RX 480 with Samsung GDDR5.
Can i ask, what is your wall consuption at this hashrates ?
And thank you for latest version it is really fastest !!!!
Hello, this is the max speed i can get on RX580 8gb msi armor
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
Well, you can reach much better speeds with overclocking and memory timing mods.
I even got 1000 h/s with RX 480 with Samsung GDDR5.
Hello, this is the max speed i can get on RX580 8gb msi armor
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
hynix : 800Mh/s and 95W at wall
samsung : 850Mh/s and 95W at wall
Does it seems correct or too low ? i see people saying they have 1000Mh/S with those cards
here is my config :
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
What‘s your speed then?
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
Well, that's what happens when GGS is not properly optimized.
Your RX 580's have Hynix GDDR5, no?
I just got a brand new RX 580. Let's see what we got here...
For example, well known from net "GOOD strap" for hynix mjr memory on Sapphire Nitro+ stable works up to 2150MHz memory clock. On MSI it's only 2120MHz stable, and even maybe less.
I am not worried by the speed, there is inches beteen the two. I am worryed about something else. As soon as I finish mining with all the card a coin too good to stop, I will send you the details.(That confirm what I wrote before)
Right now I have just received an rx 480 xfx 8gb samsung, first thing tomorrow will be to reach 30 Mhs in etash, just for the fun of it, as I am mining only Neoscrypt during the day and CN during the night at the moment ( Thanks to my solar panels)
I got a couple of "thread stuck in the driver " windows error when running phymem btw. And some spontaneous reboot when mining Neoscrypt, I was thinking about the PSU, but then I tryied Claymore ( that is faster but use so much energy to be worthless) and the PSU was ok with that. SO, its something else.
I forgot: Nvdia is just mining Neoscrypt & Lira2z
Right now I have just received an rx 480 xfx 8gb samsung, first thing tomorrow will be to reach 30 Mhs in etash, just for the fun of it, as I am mining only Neoscrypt during the day and CN during the night at the moment ( Thanks to my solar panels)
I got a couple of "thread stuck in the driver " windows error when running phymem btw. And some spontaneous reboot when mining Neoscrypt, I was thinking about the PSU, but then I tryied Claymore ( that is faster but use so much energy to be worthless) and the PSU was ok with that. SO, its something else.
I forgot: Nvdia is just mining Neoscrypt & Lira2z
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
Well, that's what happens when GGS is not properly optimized.
Your RX 580's have Hynix GDDR5, no?
I just got a brand new RX 580. Let's see what we got here...
SRB miner works with worksize 8 and threads 2. Playing only with intensity gives higher results. In GGS maximum result achived with intensity is 3-5% lower.
Maybe his cryptonights kernels better? Or something else... You must know about it more ))))
Notices:
His intensity works onother way, than GGS, thats means, i think, that his CN kernel builded another way?
Best results on SRB is on intensity 64,72,80,94,108
Intensity higher 112-116 starts to give drops in speed to 0 h/s (close to 8Gb memory used???)
On GGS best results on my hynix MJR is only on 128 or 144 intensity. Any other vairants of intensity gives slower speed. Different mod bioses tried - same dependenses.
Maybe it helps you to understand where the dog is buried...
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
Well, that's what happens when GGS is not properly optimized.
Your RX 580's have Hynix GDDR5, no?
I just got a brand new RX 580. Let's see what we got here...
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
Great, just have to wait for zawawa software 
Actually, GGS is now compatible with the aforementioned USB watchdog.
I got pretty lucky on this one...
I got pretty lucky on this one...
Great news, how to purchase one "plug ang play" from you ? Delivery to France.
How about ordering yourself ?
->https://www.amazon.fr/Watchdog-red%C3%A9marrage-automatique-Serveur-Firewall/dp/B07BKBN7WG/ref=sr_1_4?rps=1&ie=UTF8&qid=1524846044&sr=8-4&keywords=usb+watchdog&dpID=51YiKwBb4iL&preST=_SY300_QL70_&dpSrc=srch
Basically, yes - plug it in, connect the cables /reset and so on/ and install the software/driver and ya are good to go ... no programming skills needed at all - it's kinda plug'n play.
Actually, GGS is now compatible with the aforementioned USB watchdog.
I got pretty lucky on this one...
I got pretty lucky on this one...
Great news, how to purchase one "plug ang play" from you ? Delivery to France.
How about ordering yourself ?
->https://www.amazon.fr/Watchdog-red%C3%A9marrage-automatique-Serveur-Firewall/dp/B07BKBN7WG/ref=sr_1_4?rps=1&ie=UTF8&qid=1524846044&sr=8-4&keywords=usb+watchdog&dpID=51YiKwBb4iL&preST=_SY300_QL70_&dpSrc=srch
Gateless Gate Sharp 1.3.7 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.7-alpha
* Fixed a critical bug around CPU thread management.
The issue should be gone now. Sorry about that...
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.7-alpha
* Fixed a critical bug around CPU thread management.
The issue should be gone now. Sorry about that...
There ya go - it works with 2T now ... just a note for the next release: Please make the upper part of the GUI (specially the part aboput temps/speed etc.) also scaleable, as it is a bit tiny if you are not on VGA
https://imgur.com/a/IqqYOtn
... as it's too tiny to show you (as example) these nice jumps on the hashrate (taken with 1.3.4) ->
https://imgur.com/a/XxtAnSO
... or show you what happends if the con goes down and comes up again /1 T gets "lost" and does not come back again /->
https://imgur.com/a/D20Ktcg
Gateless Gate Sharp 1.3.7 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.7-alpha
* Fixed a critical bug around CPU thread management.
The issue should be gone now. Sorry about that...
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.7-alpha
* Fixed a critical bug around CPU thread management.
The issue should be gone now. Sorry about that...
Jump to: