Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 26. (Read 214428 times)

Quote from: skablast on April 29, 2018, 01:25:47 AM

Well, you haven't turned on memory timing mods, so... Also, I noticed you are not using the latest version of GGS.

Actually, I prepared only two sets of default values for memory timing mods so far: one for RX 480/580 Samsung GDDR5, and the other is for RX 470/570 Hynix GDDR5. You can find these default settings in the DeviceSettings folder. I will work on other cards tomorrow, so no worries.

Thanks for your suggestion.

So i turned on the memory timings and update GGS.

A little better but not so much, total 870mh/s for a 580 8gb samsung memory.

Did you hit the "Boost Performance" button?

I'm sorry i don't see boost performance button i suppose you mean hardware acceleration i pressed it now and still 850 mh/s on samsung memory, i think it is not my gpu bios because i tried to buy one and the result is not as good as the one i have and my hashrate on claymore ETH is 30,5 Mh/s.

The "Boost Performance" button is the first thing you see on the dashboard... It is different from the "Hardware Acceleration" checkbox.

Hello, i just wanted to thank you for your advices, now that the config is ok, GGS is the faster miner for my rx580 armor mines, and the UI now also faster so it is the perfect miner !!!

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I was thinking you were adding Lyra2z first , or whatever other algos you decided, and THEN approaching GCN to try to have better performances on Vegas / overall..

On a different note, I jave reached 29.2 Mhs with an rx 480 8gb Samsung so far.

A new button is needed btw, for optimization:
there is one for prioritize stability, make one for prioritizing power consumption and stability as well.

Lyra2Z will be written in the GCN assembly. Makes sense, no?

skablast

member

Activity: 476

Merit: 19

I was thinking you were adding Lyra2z first , or whatever other algos you decided, and THEN approaching GCN to try to have better performances on Vegas / overall..

On a different note, I jave reached 29.2 Mhs with an rx 480 8gb Samsung so far.

A new button is needed btw, for optimization:
there is one for prioritize stability, make one for prioritizing power consumption and stability as well.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on April 28, 2018, 02:38:45 PM

Quote from: dingdongtobias on April 28, 2018, 02:24:45 PM

Quote from: Pennywis3 on April 28, 2018, 06:38:09 AM

About the kernels; I think that both kernels for CryptoNight, GGS's and SRBMiner's are taken from SG-Miner-GM, which means that both are written by zawawa Cool

The name yuo looking for is W0lf, sgminer using his opencl kernel.

That's right. That's why I gave him part of the DEVFEE. He was actually quite happy about that.

Actually, now I think about it, I did make not an insignificant amount of changes to W0lf's kernel.
In any case, I am quite happy with what I achieve with GGS so far. All the preparation is done for
kernel optimizations. I just embedded CLRX, matszpk's excellent assembler, into GGS, which should allow
me to do a number of interesting tricks. We will see...

Sounds alluringly. Awaiting new versions...

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: dingdongtobias on April 28, 2018, 02:24:45 PM

Quote from: Pennywis3 on April 28, 2018, 06:38:09 AM

About the kernels; I think that both kernels for CryptoNight, GGS's and SRBMiner's are taken from SG-Miner-GM, which means that both are written by zawawa Cool

The name yuo looking for is W0lf, sgminer using his opencl kernel.

That's right. That's why I gave him part of the DEVFEE. He was actually quite happy about that.

Actually, now I think about it, I did make not an insignificant amount of changes to W0lf's kernel.
In any case, I am quite happy with what I achieve with GGS so far. All the preparation is done for
kernel optimizations. I just embedded CLRX, matszpk's excellent assembler, into GGS, which should allow
me to do a number of interesting tricks. We will see...

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: Pennywis3 on April 28, 2018, 06:38:09 AM

About the kernels; I think that both kernels for CryptoNight, GGS's and SRBMiner's are taken from SG-Miner-GM, which means that both are written by zawawa Cool

The name yuo looking for is W0lf, sgminer using his opencl kernel.

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: zawawa on April 28, 2018, 11:35:25 AM

Quote from: fluxy12 on April 28, 2018, 11:33:06 AM

Quote from: fluxy12 on April 28, 2018, 11:33:06 AM

Well, you haven't turned on memory timing mods, so... Also, I noticed you are not using the latest version of GGS.

Actually, I prepared only two sets of default values for memory timing mods so far: one for RX 480/580 Samsung GDDR5, and the other is for RX 470/570 Hynix GDDR5. You can find these default settings in the DeviceSettings folder. I will work on other cards tomorrow, so no worries.

Thanks for your suggestion.

So i turned on the memory timings and update GGS.

A little better but not so much, total 870mh/s for a 580 8gb samsung memory.

Did you hit the "Boost Performance" button?

I'm sorry i don't see boost performance button i suppose you mean hardware acceleration i pressed it now and still 850 mh/s on samsung memory, i think it is not my gpu bios because i tried to buy one and the result is not as good as the one i have and my hashrate on claymore ETH is 30,5 Mh/s.

The "Boost Performance" button is the first thing you see on the dashboard... It is different from the "Hardware Acceleration" checkbox.

Oh my god how is it possible i didn't see it. I'll test and back thank you.

(Ps : thank you i've laugh a lot

)) )

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Well, you haven't turned on memory timing mods, so... Also, I noticed you are not using the latest version of GGS.

Actually, I prepared only two sets of default values for memory timing mods so far: one for RX 480/580 Samsung GDDR5, and the other is for RX 470/570 Hynix GDDR5. You can find these default settings in the DeviceSettings folder. I will work on other cards tomorrow, so no worries.

Thanks for your suggestion.

So i turned on the memory timings and update GGS.

A little better but not so much, total 870mh/s for a 580 8gb samsung memory.

Did you hit the "Boost Performance" button?

I'm sorry i don't see boost performance button i suppose you mean hardware acceleration i pressed it now and still 850 mh/s on samsung memory, i think it is not my gpu bios because i tried to buy one and the result is not as good as the one i have and my hashrate on claymore ETH is 30,5 Mh/s.

The "Boost Performance" button is the first thing you see on the dashboard... It is different from the "Hardware Acceleration" checkbox.

fluxy12

jr. member

Activity: 145

Merit: 1