Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 49.

murgorx

member

Activity: 443

Merit: 13

Quote from: treanski on March 04, 2018, 05:57:17 AM

for cryptonight you need different memory timings, but with micron i cant help...i have only hynix and samsung memory gpus

Okay, then aside from the BIOS mod, is there anything I can improve in here - 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

for cryptonight you need different memory timings, but with micron i cant help...i have only hynix and samsung memory gpus

murgorx

member

Activity: 443

Merit: 13

Quote from: treanski on March 04, 2018, 05:47:13 AM

Quote from: murgorx on March 04, 2018, 05:36:32 AM

Guys, anyone of you mining with Sapphire NITRO R9 380X 4GB GDDR5, 11250-99-90G?
I'm simply asking, because I've found a local dealer, from whom I can buy the cards for 200$ each and simply need to know what kind of h/s does these cards produce to know if there's any point in making a rig out of them Cheesy

Do not have a lot of money left and don't wanna invest in a dead card.

BTW regarding a RX580 Sapphire nitros SE - I'm getting 880h/s on each card, is that okay for the card? Running on 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock, 65w from the wall. If there's any room to increase the h/s, even if it's drawing more electricity, please share, it's not that concerning.

its even possible to reduce electricity draw and increase hashrate on this gpu, you need bios mod

I am using this bios mod - https://anorak.tech/t/sapphire-nitro-rx-580-8gb-micron-bios-mod/46457/14. After I flashed my cards with it, firstly when I was mining ETH, it got me from 30mh to 31.5mh/s on ETH, but I do not know if CryptoNight requires different settings... If you have any suggestions, would really appreciate it

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

Quote from: murgorx on March 04, 2018, 05:36:32 AM

Guys, anyone of you mining with Sapphire NITRO R9 380X 4GB GDDR5, 11250-99-90G?
I'm simply asking, because I've found a local dealer, from whom I can buy the cards for 200$ each and simply need to know what kind of h/s does these cards produce to know if there's any point in making a rig out of them Cheesy

Do not have a lot of money left and don't wanna invest in a dead card.

BTW regarding a RX580 Sapphire nitros SE - I'm getting 880h/s on each card, is that okay for the card? Running on 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock, 65w from the wall. If there's any room to increase the h/s, even if it's drawing more electricity, please share, it's not that concerning.

its even possible to reduce electricity draw and increase hashrate on this gpu, you need bios mod

murgorx

member

Activity: 443

Merit: 13

Guys, anyone of you mining with Sapphire NITRO R9 380X 4GB GDDR5, 11250-99-90G?
I'm simply asking, because I've found a local dealer, from whom I can buy the cards for 200$ each and simply need to know what kind of h/s does these cards produce to know if there's any point in making a rig out of them Cheesy

Do not have a lot of money left and don't wanna invest in a dead card.

BTW regarding a RX580 Sapphire nitros SE - I'm getting 880h/s on each card, is that okay for the card? Running on 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock, 65w from the wall. If there's any room to increase the h/s, even if it's drawing more electricity, please share, it's not that concerning.

UnclWish

sr. member

Activity: 1484

Merit: 253

zawawa, any news? What with 1.3.0 version with memory timing mod?

Darek90

newbie

Activity: 8

Merit: 0

Quote from: UnclWish on March 03, 2018, 04:06:54 AM

Quote from: Darek90 on March 03, 2018, 03:55:12 AM

When will you update miner for Electroneum(cryptonight) so we can mine it again?

Cryptonight algo is work in GGS. To mine electroneum you just must enter your custom pool and mine.

After last night crash? i dont think so

Electroneum
5 hrs ·
Web and App wallets back online.
If you run an ETN node it's ESSENTIAL you update it. Please read posts below. If you don't know what a node is - don't worry, this message is not for you!

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Darek90 on March 03, 2018, 03:55:12 AM

When will you update miner for Electroneum(cryptonight) so we can mine it again?

Cryptonight algo is work in GGS. To mine electroneum you just must enter your custom pool and mine.

Darek90

newbie

Activity: 8

Merit: 0

When will you update miner for Electroneum(cryptonight) so we can mine it again?

t3syncro

newbie

Activity: 23

Merit: 0

Quote from: UnclWish on March 02, 2018, 02:59:10 AM

Quote from: t3syncro on March 02, 2018, 01:48:48 AM

Quote from: UnclWish on March 01, 2018, 05:37:05 PM

Quote from: t3syncro on March 01, 2018, 05:25:15 PM

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

If card used to output image to monitor than Windows use vram.
Try low RI from 58 step by 1 and look into speed.

Thanks, i know that. I use the internal Intel VGA...But i'll give it a try.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: t3syncro on March 02, 2018, 01:48:48 AM

Quote from: UnclWish on March 01, 2018, 05:37:05 PM

Quote from: t3syncro on March 01, 2018, 05:25:15 PM

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

If card used to output image to monitor than Windows use vram.
Try low RI from 58 step by 1 and look into speed.

t3syncro

newbie

Activity: 23

Merit: 0

Quote from: UnclWish on March 01, 2018, 05:37:05 PM

Quote from: t3syncro on March 01, 2018, 05:25:15 PM

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: t3syncro on March 01, 2018, 05:25:15 PM

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

t3syncro

newbie

Activity: 23

Merit: 0

Did not work, it only has 2GB ram....

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: t3syncro on March 01, 2018, 05:47:34 AM

Hi,

i get the most reliable Hashrate with this:

580: 2 Threads, 128 Rawintensity, 8 Local Worksize
570: 2, 112, 8
550: 2, 44, 8

Did you tried RI 58-60 for 550?

rambetiko

member

Activity: 189

Merit: 10

neoscrypt vega 64 hash?

stonedgz

newbie

Activity: 84

Merit: 0

Quote from: Pete_X on March 01, 2018, 05:36:15 AM

Quote from: stonedgz on March 01, 2018, 01:39:40 AM

i start mining using GGS but i got lower hashrate than claymore and power consuption is high my card is drawing 130w for 26mh\s thats too much

that on bios mode cards you think i should run on original Huh

and about intensity how much should it be for rx570 4gb ??

gpu: rx 570 4gb powercolor red devils

1. Don't trust clay Wink

2. Which Algo ?
3. Which Settings (core/mem etc.) and how done (GGS, Afterbruner, Wattman etc.) ?=?

A modded Bios is "not bad" and GGS works with it - when you take care that the setup is correct done .... GGS normally has the right intensity for your card. You can see all card related stuff in the devices tab. There you see also the diff. settings for the diff algos ....

1. i do trust clay that guy is genius
2. ethash
3.1200\1950 done by afterburner

i have another problem when mining cryptonight 1 of my cards drop down with the hashrate almost half of the other even tho both same setting (GPU1:740h\s GPU2:450h\s)

t3syncro

newbie

Activity: 23

Merit: 0

Quote from: skablast on March 01, 2018, 09:28:10 AM

The 550 is modded or you have just changed the timestraps?

I unlocked it via SRB Polaris 3.3 and modified the straps, it has elpida memory on it. ..
But unlocking doesn't change the hashrate. It seems that the algo is not detecting the unlocked ROPs. Additionally i didn't get a 560 ROM running.

Try this, but don't expect a perfect strap according to some mystical rules designed while running around naked at full moon. And don't get higher than 2040 MHZ memory.
But please report, if it works for you. Would be interesting.

Code:

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C01712262B5C2B3715

xmrstak gives a steady 530 h/s.

R0land

jr. member

Activity: 208

Merit: 3

My RX 550 hashrate is ~400 h/s with GateLessGateSharp ... and ~450 h/s with sgminer.

skablast

member

Activity: 476

Merit: 19

The 550 is modded or you have just changed the timestraps?

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 49. (Read 214428 times)