Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 53. (Read 214428 times)
zawawa, please don't forget to do something with high CPU usage by GGS when GGS overclock option enabled.
How can I activate telemetry on GGS ?
There is any Android APP that support it ? there is for Claymore,but I haven't foun one for ggs
There is any Android APP that support it ? there is for Claymore,but I haven't foun one for ggs
@zawawa:
FYI: AMD's 18.2.2 is out and so far no probs with your last build, "feels" like it even got a bit faster (on stock bioses) ....
What most folks really miss is to keep an eye on the GDDR5 temps ... but when you see what kind of pads the mfgs use
. When i get a new card nearly the 1st step is to get rid of the original padsand swap to some better stuff 
FYI: AMD's 18.2.2 is out and so far no probs with your last build, "feels" like it even got a bit faster (on stock bioses) ....
What most folks really miss is to keep an eye on the GDDR5 temps ... but when you see what kind of pads the mfgs use
. When i get a new card nearly the 1st step is to get rid of the original padsand swap to some better stuff 
This reminds me of good old DOS days... I would just focus on the GUI and keep the command line version to the bare minimum, though.
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back)
all Nitra+ 570 8GB
I have 4 Hynix and those are lagging too. Trying to figure out how to bump them up on cryptonight. For ethash they are all the same. Will let you know if I find anything, also please let me know if you do.
Cheers!
they do not lag, your memory timings sucks. hynix needs special timings to get speed close to samsung memory
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back)
all Nitra+ 570 8GB
I have 4 Hynix and those are lagging too. Trying to figure out how to bump them up on cryptonight. For ethash they are all the same. Will let you know if I find anything, also please let me know if you do.
Cheers!
if you mod the card, I don't know but
if you have changed just the timing strap for ethereum
just put 1200 850 and 2150 850
it will give you on cryptonight 900 speed minimu
from that , you have to tweak card by card in order to go higher but they start
SapphirePulse 8gb, Micron or Elpida Samsung memory
if you have changed just the timing strap for ethereum
just put 1200 850 and 2150 850
it will give you on cryptonight 900 speed minimu
from that , you have to tweak card by card in order to go higher but they start
SapphirePulse 8gb, Micron or Elpida Samsung memory
Hi,
I just tried your software on 1 of my rigs and results seems really promising. But I have something very strange :
I use cryptonight algo (electroneum on nanopool) and out of my 6 cards only 3 are working : 2 RX580 and 1 RX470. The 3 other RX580 are just not starting.
It's strange as XMR-STACK and Claymore work really well on this RIG.
Any idea why ?
Thank you for your feedback.
Christophe
I just tried your software on 1 of my rigs and results seems really promising. But I have something very strange :
I use cryptonight algo (electroneum on nanopool) and out of my 6 cards only 3 are working : 2 RX580 and 1 RX470. The 3 other RX580 are just not starting.
It's strange as XMR-STACK and Claymore work really well on this RIG.
Any idea why ?
Thank you for your feedback.
Christophe
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back)
all Nitra+ 570 8GB
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that?
Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link
.Ah you mean Raw Intensity? I'm new to this software
but anyway if I set that over 128 I get not enough memory error.For cryptonight algo (Threads =2, Worksize = 8 ):
RI = 128 needs 4,3Gb VRAM. And 128 is for 480/580 8Gb cards.
For 470/570/480/580 4Gb cards use RI = 112
For 270X 4Gb best is RI = 59-60.
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that?
Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link
.Ah you mean Raw Intensity? I'm new to this software
but anyway if I set that over 128 I get not enough memory error. Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that?
Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link
. Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that?
just tried running on 12*570 8GB - looks awesome!
never seen such rates on cryptonight on polarises.
there's something consistently wrong with two cards:
and with slightly reduced volts:
never seen such rates on cryptonight on polarises.
there's something consistently wrong with two cards:
and with slightly reduced volts:
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
Hello Yuri this is amazing!! I just found your miner today and I saw the year was 2016 and wasn't too enthusiastic, but when I checked your Github I found your latest version and you're actively developing it. Thank you sir!! I am running it on 10 RX 570 8GB Nitro+ and it's AMAZING!! Beautiful interface, great hash rate, you are brilliant!! And most of all thank you for making this free. Please let me know if there is anything I can do to support this project. I will most likely be emailing you soon too for some tips.
Your new fan and supporter!
Your new fan and supporter!
FYI.
About the DEVFEE
This miner has a built-in 1% DEVFEE. I must emphasize that I absolutely need the DEVFEE in order to continue this project, and I will not provide any support for those who run binaries I did not sign. This project requires a full-time attention and testing is quite expensive. The DEVFEE is non-negotiable. If you don't like it, please go elsewhere
Gateless Gate Sharp is the first open-source dual ETH/XMR/PASC/LBC/FTC/MONA miner for Windows operating systems. It focuses on performance, stability, and ease of use.
Unlike the original Gateless Gate, this miner aims at stability with a much simpler design and the managed .NET Framework.
* https://github.com/zawawawa/GatelessGateSharp
* https://github.com/zawawawa/GatelessGateSharp/releases/download/v1.2.18-stable/Gateless_Gate_Sharp_1.2.18_stable_Setup.msi (Windows x64 Installer)
Currently, the miner supports Ethash/Pascal dual-mining, Ethash/daggerhashimoto, CryptoNight, Pascal, Lbry, NeoScrypt, LyraREv2, and the following major pools: NiceHash, ethermine.org, ethpool.org, DwarfPool, Nanopool, zpool, and mineXMR.com. Support for custom pools has also been added.
All you have to do to mine is to download and run the installer, launch the miner, enter your wallet address(es), and click the Start button. The miner is yet to be fully optimized, however, and the first official release will be available when it is feature-complete.
Please note that, even though this miner does work with NVIDIA cards, the current focus of the project is on AMD.
Unlike the original Gateless Gate, this miner aims at stability with a much simpler design and the managed .NET Framework.
* https://github.com/zawawawa/GatelessGateSharp
* https://github.com/zawawawa/GatelessGateSharp/releases/download/v1.2.18-stable/Gateless_Gate_Sharp_1.2.18_stable_Setup.msi (Windows x64 Installer)
Currently, the miner supports Ethash/Pascal dual-mining, Ethash/daggerhashimoto, CryptoNight, Pascal, Lbry, NeoScrypt, LyraREv2, and the following major pools: NiceHash, ethermine.org, ethpool.org, DwarfPool, Nanopool, zpool, and mineXMR.com. Support for custom pools has also been added.
All you have to do to mine is to download and run the installer, launch the miner, enter your wallet address(es), and click the Start button. The miner is yet to be fully optimized, however, and the first official release will be available when it is feature-complete.
Please note that, even though this miner does work with NVIDIA cards, the current focus of the project is on AMD.
Hello Yuri this is amazing!! I just found your miner today and I saw the year was 2016 and wasn't too enthusiastic, but when I checked your Github I found your latest version and you're actively developing it. Thank you sir!! I am running it on 10 RX 570 8GB Nitro+ and it's AMAZING!! Beautiful interface, great hash rate, you are brilliant!! And most of all thank you for making this free. Please let me know if there is anything I can do to support this project. I will most likely be emailing you soon too for some tips.
Your new fan and supporter!
zawawa - any luck for VEGA cards, XMR? Thanks
imgur.com/a/tJv9e - pool results
read the 4th line in your own picture
read the 4th line in your own picture
I understand that the results my vary, but come on , I've been mining for 2hours and 30 minutes and it consistently shows 2000 kh/s above what I see in the miner. It's not for 5, but for 150 minutes mining.
imgur.com/a/tJv9e - pool results
read the 4th line in your own picture
read the 4th line in your own picture
Jump to: