Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 58. (Read 214431 times)

I would reset everything to stock settings, including the video BIOS'es, and try again.
If you are using modded BIOS'es, please make sure to read the section in Readme.md on modded BIOS'es,

zawawa, Hello Sir,

I'm facing with strange behavior and don't know what is causing that:
1. My rig instantly freezes after 2-3 hours of continuous mining with GGS. Sometimes application restarts without any reason. That is not the case if I'm using another mining software. Screenshot with Event Viewer log is attached.
https://imgur.com/a/9kTIl

2. Another problem is from time to time random GPU/GPUs starts showing low hashrate. It also appears after several hours of mining. Application restart resolves this problem.
https://imgur.com/a/I5nlb

Rig specs:
Celeron G1820
4GB of RAM
Windows 10 x64
Pagefile is 24GB on drive D (not a system drive)
AMD Adrenaline 18.2.1

No overheating of any PC component.

Low free RAM? Pagefile has to be on a C drive? Mixed GeForce/Radeon rig?.. I'm starting to give up  

@zazawa
Hi!
Tell me how in the Custom Pools on the Algo Ethash, put the number of the rig? usually you write a purse and then the number of a rig, the error is that stop the miner or try again.
On CryptoNight everything works fine.

Just hold the "SHIFT" key during startup of GGS.

How do you delete the settings Gateless gate applies during startup? I have autostart/automine setup, and I undervolted 2 cards too low, which means after 5 minutes two cards crash and then the other cards crash the program after 20 minutes. I have tried uninstalling Gateless gate but the settings are stored on my win 10 computer somewhere else, probably the registry. How do i delete the settings for overclock, undervoltage, intensity and such for the GGS  so i can start from fresh?

What brand rx 560 are you using I'm trying to find some more decent cards you don't need a loan for and 540h at 45w is good plus I like the cryptonight algo

Figure I'd let you know that I'm getting 815h on my r9 390 and the pool is reporting about the same but at the bottom it says 404h and one more thing does the overclocking work now I had a old release before and just install the latest and didn't want to uninstall afterburner if I still needed but would much rather run my clocks through the miner

Zawawa, why don't you include default PBE timings 1.6.7 one..
Hynix MJR though is garbage, i hash monero on 4gb way faster than on 8gb rx 580 (well, same thing with memory controllers as i expected, funnily, RX 560 2gb elpida, mines at 540 H/s 1200/2050 undervolted (didn't try going more!) even the non 6 pin version! it doesnt even throttle! meaning less than 45 watts or even less of energy, meanwhile, the 4GB variants does mid 400s!)

Try to lower overclock or rise voltage if you make undervoltage. Also try to lower intensity. Wich algo you mine?

Why this keep freezing my rig after like 30 minutes it doesn't even restart I have to manually reset the power supply to get it going again

Zawawa:

when you said:

Ah, that’s because the messages of exceptions on your system is not in English.
I will fix it soon.

its probably the same things that happen with my Italian windows and  the fact that you sw keep askying at the start for a 24 GB virtual page minimum even if I have a 60 gb virtual page! And that the sw is unable to modify it when I let it run...

Unfortunately, I'm not so rich... But I know that Hynix MJR memory works similiar to Micron memory... Timings from Micron memory works good  and better for Hynix MJR without editing.

Technically, this is pretty straight forward, but I need to figure out a good way to implement this feature without making the user interface more confusing for the nontechnical users. We will see...

Well, for that, somebody has to donate a card or two to me...

Thanks about disk access. For SSD it important.

Samsung and Elpida is good. But what about Hynix MJR memory?

Most of my 480’s have 8GB ram by Samsung. After I’m done with it, I will work on Elpida.

Honestly, checking values is just too much trouble. I will do something else to reduce disk access.

What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.

Ah, that’s because the messages of exceptions on your system is not in English.
I will fix it soon.

I don't understand why GGS every start mining saves settings. It's no changes in them...
And it's still exists bug with reconnect when custom pool server didn't connected from 1st time. Recoonection didn't work:

2018-02-07 03:54:41.3293 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:54:41.3293 [4] Reconnecting to the server...
2018-02-07 03:55:07.3391 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:55:07.3391 [4] Reconnecting to the server...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Stratum server failed to send a new job.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...


Last strings repeats forever.
If press Stop/resume connection establishes.