Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 57.

z97rx470

newbie

Activity: 36

Merit: 0

Quote from: zawawa on February 09, 2018, 07:38:02 AM

Quote from: z97rx470 on February 09, 2018, 04:23:51 AM

Windows won't even boot up without freezing anymore this is the second time GGS made me have to reinstall windows. Original GG was way more stable

You can stop auto-start by holding a Shift key.
Also, I am pretty sure you read a warning about modded BIOS.
I would really like to help more, but there is only so much I can do with the limited information you gave me.

I do have modded bios on my RX 470s (1500 straps) is that the problem for all the freezing?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: Bare on February 09, 2018, 01:43:48 PM

Quote from: UnclWish on February 08, 2018, 09:40:38 AM

Quote from: OhMyHolyToken on February 08, 2018, 07:47:55 AM

Gonna back to 1.2.11.

Bc 1.2.18 is not stable at all for 280/290 RIG.

What unstable exactly?

I can confirm this too, 1.2.18 is unstable for one of my rigs, other rigs have 4 or less cards and 1.2.18 is working fine on them but this one with 6x cards(390 and furys mixed) can only mine for about 45min and then the rig restarts out of the blue, I'm not sure why.[Neoscrypt mining]
I've tried 1.2.11. alpha and it's more stable so far(atm mining for 1h:42min and still going) than 1.2.18. at least for situation like this (390+fury cards rig)

While mining on 1.2.11 alpha I'm using default 1.2.18 settings for 390 and fury cards, all cards are stock and no oc, the same settings as if I would've mined on 1.2.18.

What seems to be the cause of these crashes on 1.2.18? can somebody elaborate?

win10 x64 v1709

8gb ddr4
intel pentium G3260

Hmm... I don't see anything problematic in your setup. The only thing I could think of at this moment is Hawaii's ridiculously high power consumption. This, combined with the demanding NeoScrypt kernel of GGS, could be a real problem. I would try lowering the core voltage of 390 by 50mV or 100mV to see if the rig would be more stable.

coke15

member

Activity: 176

Merit: 10

hi zawawa

the stable version is very good:)

but 2 (little)things :
-when it config and save the parameter,the sqlite freeze ggs for 1-2 minutes (maybe my hard drive? not a ssd)
-possible to implement an option to restart ggs or restart rig if hasrate of one or more cards hangs,freeze. ex: if our hasrate for cards is 30,if it drop to a value we put,ex 25 it restart automaticaly itself. or if the drop is recurent restart the rig.

it would be awesome Wink

Bare

member

Activity: 130

Merit: 11

Quote from: UnclWish on February 08, 2018, 09:40:38 AM

Quote from: OhMyHolyToken on February 08, 2018, 07:47:55 AM

Gonna back to 1.2.11.

Bc 1.2.18 is not stable at all for 280/290 RIG.

What unstable exactly?

I can confirm this too, 1.2.18 is unstable for one of my rigs, other rigs have 4 or less cards and 1.2.18 is working fine on them but this one with 6x cards(390 and furys mixed) can only mine for about 45min and then the rig restarts out of the blue, I'm not sure why.[Neoscrypt mining]
I've tried 1.2.11. alpha and it's more stable so far(atm mining for 1h:42min and still going) than 1.2.18. at least for situation like this (390+fury cards rig)

While mining on 1.2.11 alpha I'm using default 1.2.18 settings for 390 and fury cards, all cards are stock and no oc, the same settings as if I would've mined on 1.2.18.

What seems to be the cause of these crashes on 1.2.18? can somebody elaborate?

win10 x64 v1709
8gb ddr4
intel pentium G3260

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: OhMyHolyToken on February 09, 2018, 12:53:10 AM

1.2.18 - RAW Int for 280/280x is 112/128 (CryptoNight)... Not enough memory.

For I -128 it's need 4.3Gb VRAM. For 112 - between 3 and 4Gb. Your cards have 3Gb VRAM. You must set intensity to 64-96. And test after changing every time. Best maybe 72, or 76, or 80, or 84, etc...

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: murgorx on February 09, 2018, 02:14:43 AM

Guys with rx580s - do you change the intensity and threads? I am mining on the stock ones, but I just want to know if I change anything it would affect my hashrate. Currently sitting at 870-880 per card at 65-70w per card, ran the rig stable for 24 hours @ 1140/2198.

Depending of memory size - 8Gb - T-2, I-128, W-8; 4Gb - T-2, I-112, W-8.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: murgorx on February 09, 2018, 02:14:43 AM

Guys with rx580s - do you change the intensity and threads? I am mining on the stock ones, but I just want to know if I change anything it would affect my hashrate. Currently sitting at 870-880 per card at 65-70w per card, ran the rig stable for 24 hours @ 1140/2198.

Looks pretty good to me!

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: z97rx470 on February 09, 2018, 04:23:51 AM

Windows won't even boot up without freezing anymore this is the second time GGS made me have to reinstall windows. Original GG was way more stable

You can stop auto-start by holding a Shift key.
Also, I am pretty sure you read a warning about modded BIOS.
I would really like to help more, but there is only so much I can do with the limited information you gave me.

z97rx470

newbie

Activity: 36

Merit: 0

Windows won't even boot up without freezing anymore this is the second time GGS made me have to reinstall windows. Original GG was way more stable

murgorx

member

Activity: 443

Merit: 13

Guys with rx580s - do you change the intensity and threads? I am mining on the stock ones, but I just want to know if I change anything it would affect my hashrate. Currently sitting at 870-880 per card at 65-70w per card, ran the rig stable for 24 hours @ 1140/2198.

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

1.2.18 - RAW Int for 280/280x is 112/128 (CryptoNight)... Not enough memory.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

The GUI freezes when GGS saves settings to an SQLite database.
I will rewrite the backend so that database access would take place in the background.
(I thought SQLite would be faster... Oh well.)
I will also upgrade the command line version and prepare documentation for it.

For a clean uninstall, you just need to delete “%AppData%\GatelessGateSharp”.

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

We really need a command line version. GUI is slow, freezing and Not Responding.

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

Quote from: UnclWish on February 08, 2018, 10:44:15 AM

Quote from: OhMyHolyToken on February 08, 2018, 10:21:07 AM

It's freeze.

How to uninstall it completely? The config is incorrect and reinstall doesn't help.

Try to disable Overclock options in GGS.

Already disabled. Now I want to completely erase it for reinstall.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: OhMyHolyToken on February 08, 2018, 10:21:07 AM

It's freeze.

How to uninstall it completely? The config is incorrect and reinstall doesn't help.

Try to disable Overclock options in GGS.

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

It's freeze.

How to uninstall it completely? The config is incorrect and reinstall doesn't help.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: OhMyHolyToken on February 08, 2018, 07:47:55 AM

Gonna back to 1.2.11.

Bc 1.2.18 is not stable at all for 280/290 RIG.

What unstable exactly?

OhMyHolyToken

jr. member

Activity: 98

Merit: 2

Gonna back to 1.2.11.

Bc 1.2.18 is not stable at all for 280/290 RIG.

mo35

member

Activity: 142

Merit: 10

Can we have proper doc. for GatelessGateSharpCL. i asked dev to implement your miner into megaminer autoswitching package (look at this as more fresh blood for your miner *wink*) , and we both came up empty regarding doc. also in latest 1.2.18 package cl version cames up as 1.2.10 Wink

Yomanarot

newbie

Activity: 2

Merit: 0

Quote from: zawawa on February 08, 2018, 03:25:20 AM

Quote from: Yomanarot on February 08, 2018, 03:07:13 AM

zawawa, Hello Sir,

I'm facing with strange behavior and don't know what is causing that:
1. My rig instantly freezes after 2-3 hours of continuous mining with GSS. Sometimes application restarts without any reason. That is not the case if I'm using another mining software. Screenshot with Event Viewer log is attached.
https://imgur.com/a/9kTIl

2. Another problem is from time to time random GPU/GPUs starts showing low hashrate. It also appears after several hours of mining. Application restart resolves this problem.
https://imgur.com/a/I5nlb

Rig specs:
Celeron G1820
4GB of RAM
Windows 10 x64
Pagefile is 24GB on drive D (not a system drive)
AMD Adrenaline 18.2.1

No overheating of any PC component.

Low free RAM? Pagefile has to be on a C drive? Mixed GeForce/Radeon rig?.. I'm starting to give up Cry

I would reset everything to stock settings, including the video BIOS'es, and try again.
If you are using modded BIOS'es, please make sure to read the section in Readme.md on modded BIOS'es,

I am using bioses that were edited with the help of Polaris Bios Editor 1.6.4.
I'll try to mod bioses with new PBE 1.6.7 and use stock bioses if it doesn't help.
Thank you.

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 57. (Read 214431 times)