Pages:
Author

Topic: GAW Community is located at: community.gawminers.com - page 16. (Read 506595 times)

member
Activity: 92
Merit: 10
So far I'm not very happy. My Falcon is drawing 1120W which is 230% more than it was originally supposed to be (and well beyond what my 850W PSU should be doing), the connectors are wired incorrectly, the fans are backwards (blowing out instead of sucking in), it ran under 25Mh for the first 10-15 min, and the ZenController is terrible.


Wait, the fans are supposed to blow in?  Mine sucks the air out.


Fans blow hot air out and cool air get sucks in the air vents in to the box.



I just tested my Black Widow and the air is definitely being sucked through the unit.  If I put my hand in the back, the airflow is restricted.  To me, airflow sees fine.
member
Activity: 104
Merit: 10
So far I'm not very happy. My Falcon is drawing 1120W which is 230% more than it was originally supposed to be (and well beyond what my 850W PSU should be doing), the connectors are wired incorrectly, the fans are backwards (blowing out instead of sucking in), it ran under 25Mh for the first 10-15 min, and the ZenController is terrible.


Wait, the fans are supposed to blow in?  Mine sucks the air out.


Fans blow hot air out and cool air get sucks in the air vents in to the box.

newbie
Activity: 56
Merit: 0
So far I'm not very happy. My Falcon is drawing 1120W which is 230% more than it was originally supposed to be (and well beyond what my 850W PSU should be doing), the connectors are wired incorrectly, the fans are backwards (blowing out instead of sucking in), it ran under 25Mh for the first 10-15 min, and the ZenController is terrible.


Wait, the fans are supposed to blow in?  Mine sucks the air out.

So does mine. Is that right?
member
Activity: 92
Merit: 10
So far I'm not very happy. My Falcon is drawing 1120W which is 230% more than it was originally supposed to be (and well beyond what my 850W PSU should be doing), the connectors are wired incorrectly, the fans are backwards (blowing out instead of sucking in), it ran under 25Mh for the first 10-15 min, and the ZenController is terrible.


Wait, the fans are supposed to blow in?  Mine sucks the air out.
full member
Activity: 140
Merit: 100
http://www.gawminers.com
Hi everyone,

Our manufacturer asked us to inform you that when powering the bigger miners (Black Widow, Falcon, War Machine) with 8 pin PSUs (typically for regular computers) with a 6 +2 pin connectors, to only use the 6-pin connectors. Don't use the extra 2 pins to make it 8 pin.

Using those extra 2 may damage the wires and the wires themselves may need to be replaced so please take caution.

Server PSUs are fine (as long as the top is all positive and bottom all negative)!

If you've had any problems at all with this, please contact us at:

[email protected] or [email protected]

Thank you!

The GAW Team
newbie
Activity: 26
Merit: 0
Got my Fury today.

From the time I opened the box to the time I was mining at 1.3MH on ScryptGuild was 4 minutes with the ZenController.  Nice!
hero member
Activity: 938
Merit: 1000
@halofirebtc
what's the 2 pin molex phone charger for? Falcon.
its for the zen controller so you can run it off your psu too

ty
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
what's the 2 pin molex phone charger for? Falcon.
its for the zen controller so you can run it off your psu too
hero member
Activity: 938
Merit: 1000
@halofirebtc
what's the 2 pin molex phone charger for? Falcon.
newbie
Activity: 28
Merit: 0
i'm not sure who wanted to know but I seen someone asking stats for fury, widow, falcon, war machine. At the minute my fury is averaging  1.4mh/s at clevermining I will post my stats up for falcon on Monday and widow the week after
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
this is beyond pissing me off. I tried using the zencontroller and that isnt working. Just sits on searching for zencontroller on the website. and here is my .bat file

cgminer.exe -o stratum+tcp://power.wemineltc.com:3333 -u user.worker -p x --nocheck-golden --chips-count 64 --ltc-clk 328 -S COM17 (also tried COM4 with and without the slashes)

Add pause to the end of your .bat and let us know what errors you're seeing.

On top of that, what COM port is listed under your Device Manager?
Hey waldohoover post your ltc address id like to donate you something for posting the solution to get mine working
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
my falcons only mining at 8Mh/s..... hopefully it will go up. and good to know about the pause trick. i was clicking it a thousand times to try and read it quick!

your chip count needs to be 128 you have it at 64 maybe that will fix it?

 I was doing the exact same thing trying to get the error message up glad milesbitcoin told me about the pause function

sorry i meant black widow. Im still waiting for my falcon. had names mixed up
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
WARNING! ONLY PLUG IN A 6 PIN PCIe CONNECTOR! DO NOT PLUG IN ALL 8 PINS!

The connectors on the ASICs are wired incorrectly. The additional 2 pins are supposed to both be ground but they wired one of them to +12V. This creates a short. My PSU detected the short and refused to turn on. Hopefully all PSUs do this. If they don't you will probably melt the connector and possibly start a fire.

THIS IS 100% CORRECT!!!
newbie
Activity: 18
Merit: 0
WARNING! ONLY PLUG IN A 6 PIN PCIe CONNECTOR! DO NOT PLUG IN ALL 8 PINS!

The connectors on the ASICs are wired incorrectly. The additional 2 pins are supposed to both be ground but they wired one of them to +12V. This creates a short. My PSU detected the short and refused to turn on. Hopefully all PSUs do this. If they don't you will probably melt the connector and possibly start a fire.
newbie
Activity: 28
Merit: 0
my falcons only mining at 8Mh/s..... hopefully it will go up. and good to know about the pause trick. i was clicking it a thousand times to try and read it quick!

your chip count needs to be 128 you have it at 64 maybe that will fix it?

 I was doing the exact same thing trying to get the error message up glad milesbitcoin told me about the pause function
member
Activity: 92
Merit: 10
my falcons only mining at 8Mh/s..... hopefully it will go up

My Black Widow takes about 5-10 minutes to get to full speed.  According to zenminer at least.
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
my black widow only mining at 8Mh/s..... hopefully it will go up. and good to know about the pause trick. i was clicking it a thousand times to try and read it quick!
newbie
Activity: 28
Merit: 0
this is beyond pissing me off. I tried using the zencontroller and that isnt working. Just sits on searching for zencontroller on the website. and here is my .bat file

cgminer.exe -o stratum+tcp://power.wemineltc.com:3333 -u user.worker -p x --nocheck-golden --chips-count 64 --ltc-clk 328 -S COM17 (also tried COM4 with and without the slashes)

CGMiner says something like icarnus failed to open COM(Whatever i put in 4 or 17)
Then says All devices disabled, cannot mine

Seriouesly what is the problem? Ive never had so much trouble with a single miner!!!

editted my post and what do you mean add pause to my .bat??

at the end of your bat file press enter twice then type in pause save it. when you run it you will get to see the error message
full member
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
think i got it. Had it listed under Com3 so i edited my .bat and that was it. Seems to be mining away!
Pages:
Jump to: