GAW Community is located at: community.gawminers.com - page 19.

mbauman89

full member

Activity: 345

Merit: 100

https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T

Quote from: cryptofunk on May 29, 2014, 01:21:27 PM

Quote from: milesbitcoin on May 29, 2014, 01:09:11 PM

Quote from: cryptofunk on May 29, 2014, 01:06:24 PM

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750. But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start. As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

Are you jumping the green and black wire on the 24pin connector? Cause theres no motherboard you need to make the psu power on.

vabchgent

sr. member

Activity: 840

Merit: 251

is there a zen miner Q&A anywhere. I connected my miner and was getting 500+ KHS when connected to them. When running free willey on my laptop 1300KHS then some.

mbauman89

full member

Activity: 345

Merit: 100

https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T

Quote from: mattle74 on May 29, 2014, 12:48:02 PM

Quote from: mrv777 on May 29, 2014, 11:32:08 AM

Quote from: mbauman89 on May 29, 2014, 11:30:38 AM

Well my package is in NJ and has been updated to -With delivery courier so idk if that means its out for delievery and ill get it today or if it means something else. I really hope it comes today!!!

It should mean it's out for delivery, congrats!!
Mine just came from DHL, but my zenminer doesn't seem to be able to register yet and I can't get cgminer working on my mac...so I still have to wait Cry

Mine also went to "With delivery courier" and then "Delivery attempted; recipient not home" - Sad... I was hoping they would leave it without a signature. I guess tomorrow is another day.

Woohoo a wonderful yellow van just left my house and my black widow is delivered! Now to set it up....

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: cryptofunk on May 29, 2014, 01:21:27 PM

Quote from: milesbitcoin on May 29, 2014, 01:09:11 PM

Quote from: cryptofunk on May 29, 2014, 01:06:24 PM

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750. But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start. As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

Alright,

I only ask had an issue with running Antminer S1 of CoolMax 700W, because it requires a dedicated 5V draw "the PSU does" to remain running at startup. (Work around was to plug hard drive or CD ROM drive into one of the 4 pin connections, along with the S1 and it stayed running).

So I was just checking to see if it was a similar situation.

cryptofunk

sr. member

Activity: 372

Merit: 250

Quote from: milesbitcoin on May 29, 2014, 01:09:11 PM

Quote from: cryptofunk on May 29, 2014, 01:06:24 PM

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750. But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start. As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

vabchgent

sr. member

Activity: 840

Merit: 251

To all if your order is coming DHL they want a signature. They said if you put your tracking number and name on a piece of paper and ask them to leave it they have no problems with leaving it. I had to leave work early to pick up my first fury.

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: mrv777 on May 29, 2014, 01:12:56 PM

Quote from: milesbitcoin on May 29, 2014, 12:59:50 PM

Quote from: mrv777 on May 29, 2014, 12:58:03 PM

It's been running for about 30 minutes now. I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX). Not sure if that could be an issue.

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:55:23 PM

Quote from: mrv777 on May 29, 2014, 12:50:10 PM

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

Haha, I found the problem when looking at my config. I still had:

--chips-count 128

instead of changing it to:

--chips-count 6

Lips sealed

Thank you for the help

Thats what I was looking for. Some times the smallest things cause the biggest problem.

mrv777

member

Activity: 83

Merit: 10

Quote from: milesbitcoin on May 29, 2014, 12:59:50 PM

Quote from: mrv777 on May 29, 2014, 12:58:03 PM

It's been running for about 30 minutes now. I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX). Not sure if that could be an issue.

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:55:23 PM

Quote from: mrv777 on May 29, 2014, 12:50:10 PM

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

Haha, I found the problem when looking at my config. I still had:

--chips-count 128

instead of changing it to:

--chips-count 6

Lips sealed

Thank you for the help

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: cryptofunk on May 29, 2014, 01:06:24 PM

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

cryptofunk

sr. member

Activity: 372

Merit: 250

Got my Widow today, how excited I was until I realized it is DOA.... F***!

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: mrv777 on May 29, 2014, 12:58:03 PM

It's been running for about 30 minutes now. I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX). Not sure if that could be an issue.

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:55:23 PM

Quote from: mrv777 on May 29, 2014, 12:50:10 PM

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

mrv777

member

Activity: 83

Merit: 10

It's been running for about 30 minutes now. I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX). Not sure if that could be an issue.

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:55:23 PM

Quote from: mrv777 on May 29, 2014, 12:50:10 PM

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: mrv777 on May 29, 2014, 12:50:10 PM

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

chrison999

full member

Activity: 216

Merit: 100

Folks, thanks for all the links to bridges. I'm just generally pissed atm. I'll get over it... really!

Regards,

Chris

mrv777

member

Activity: 83

Merit: 10

It's the Fury. The pool seems accurate (a bit low though), but cgminer is way high. Did I miss something?

Thanks!

Quote from: milesbitcoin on May 29, 2014, 12:46:27 PM

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

alienesb

hero member

Activity: 868

Merit: 1000

Quote from: zenMiner_Eric on May 29, 2014, 12:36:47 PM

Quote from: Cassey on May 29, 2014, 12:15:09 PM

Quote from: alienesb on May 29, 2014, 12:11:19 PM

Quote from: Cassey on May 29, 2014, 12:05:43 PM

Just an FYI in case anyone else is experiencing it: I am having login problems at zenminer. Registered yesterday and activated my controller, set up pools, etc. Can't get logged in today. The login screen just sits there doing nothing, not complaining, not logging me in.

I have e-mail support@zenminers and PMed their rep here.

Anyone else having similar problems?

Yes but only in Firefox. I logged in no problem with Chrome.

Oh! Bless you! I'm in via Chrome!

I've taken note of your findings and forwarded it to our developers. Leave it to Chrome to save the day

You're welcome

AtomicFrost

member

Activity: 92

Merit: 10

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

How long have you left it running? I know that a lot of pools need between 30min - several hours before the listed hashrate is close to accurate.

mattle74

full member

Activity: 163

Merit: 100

Quote from: mrv777 on May 29, 2014, 11:32:08 AM

Quote from: mbauman89 on May 29, 2014, 11:30:38 AM

Well my package is in NJ and has been updated to -With delivery courier so idk if that means its out for delievery and ill get it today or if it means something else. I really hope it comes today!!!

It should mean it's out for delivery, congrats!!
Mine just came from DHL, but my zenminer doesn't seem to be able to register yet and I can't get cgminer working on my mac...so I still have to wait Cry

Mine also went to "With delivery courier" and then "Delivery attempted; recipient not home" - Sad... I was hoping they would leave it without a signature. I guess tomorrow is another day.

milesbitcoin

newbie

Activity: 56

Merit: 0

Quote from: mrv777 on May 29, 2014, 12:45:45 PM

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

mrv777

member

Activity: 83

Merit: 10

Anyone else getting weird output from their miner under windows? I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

Topic: GAW Community is located at: community.gawminers.com - page 19. (Read 506595 times)