I've taken note of your findings and forwarded it to our developers. Leave it to Chrome to save the day
And to forums for helping find solutions!
Topic: GAW Community is located at: community.gawminers.com - page 20. (Read 506589 times)
I've taken note of your findings and forwarded it to our developers. Leave it to Chrome to save the day
And to forums for helping find solutions!
While wireless devices are not supported in the launch release, we may be including support in a future release. In the meantime, for those of you who require wireless, you can always use an inexpensive wireless bridge device like the one found here -> http://www.amazon.com/Cisco-Linksys-WET11-Wireless-Ethernet-Bridge/dp/B000066JQU
Forgive me if I'm sounding ticked off, but learning the above plus seeing my shipment bounce all over the western US instead of coming fairly direct to me have combined to put me in a pretty foul mood atm. So....
Uhhh... that site says "2 new from $100" and, frankly, $100 isn't "inexpensive" in my books. As well, if I want to go that route I now have to order another part and wait for it to come! I sure wish I'd known about this before!
So, correct me if I'm wrong... since it appears I can't use zenminer unless I either string network cable or buy an (cough!) "inexpensive" bridge can I buy a cheap memory card, install the raspberry pi o/s and the GAW cgminer software and run the furys via wifi that way???
Thanks for your help...
Regards,
Chris
Drive out to Best Buy (or Walmart) and get a Netgear one. Best Buy price matches Amazon, so you can get the amazon price and not have to wait for shipping. I use one for my mining rigs, and I'll probably be putting this one down there with them as well.
Just an FYI in case anyone else is experiencing it: I am having login problems at zenminer. Registered yesterday and activated my controller, set up pools, etc. Can't get logged in today. The login screen just sits there doing nothing, not complaining, not logging me in.
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
Yes but only in Firefox. I logged in no problem with Chrome.
Oh! Bless you! I'm in via Chrome!
I've taken note of your findings and forwarded it to our developers. Leave it to Chrome to save the day
Any old wireless bridge will do the trick. There are plenty of cheap ones out there. Such as this, this or even this! Those to me are inexpensive.
Thanks for the links, volder. However, they're in the US and I'm in Canada, so unless I want to go through another 2-3 days of waiting for stuff to come, they're not all that helpful. I'll do some searching on amazon.ca (and elsewhere) and see if I can come up with something within my limited, low-income, living-on-a-pension budget.
My point, though, is that it would've been nice to know this before now. Also, I'm still wondering what my other options are, such as running the pi using the pi o/s and cgminer, or even maybe running it with my gridseeds on my other (linux laptop) controller?
Again, thanks for any help provided. I'll calm down shortly.
Regards,
Chris
Any old wireless bridge will do the trick. There are plenty of cheap ones out there. Such as this, this or even this! Those to me are inexpensive.
Thanks for the links, volder. However, they're in the US and I'm in Canada, so unless I want to go through another 2-3 days of waiting for stuff to come, they're not all that helpful. I'll do some searching on amazon.ca (and elsewhere) and see if I can come up with something within my limited, low-income, living-on-a-pension budget.
My point, though, is that it would've been nice to know this before now. Also, I'm still wondering what my other options are, such as running the pi using the pi o/s and cgminer, or even maybe running it with my gridseeds on my other (linux laptop) controller?
Again, thanks for any help provided. I'll calm down shortly.
Regards,
Chris
Zenminer questions:
I have two pools defined:
stratum+tcp://mine.multicoinpool.org:3310
and
stratum+tcp://mine.coinshift.com:3333
It appears that the miner is round-robining based on very quick data I'm seeing. Is there anyway to specify failover behavior? Without that, sites like betarigs is NOT going to work... reducing the potential payback of our rigs a lot.
Also curious if we are going to be allowed to tune our rigs via clock settings and the like?
Is it the goal of zenMINER to accommodate such things, or is the target audience just the plug&go crowd? (In which case we would just need to use zenMINER as a firmware update site).
Cassey
I have two pools defined:
stratum+tcp://mine.multicoinpool.org:3310
and
stratum+tcp://mine.coinshift.com:3333
It appears that the miner is round-robining based on very quick data I'm seeing. Is there anyway to specify failover behavior? Without that, sites like betarigs is NOT going to work... reducing the potential payback of our rigs a lot.
Also curious if we are going to be allowed to tune our rigs via clock settings and the like?
Is it the goal of zenMINER to accommodate such things, or is the target audience just the plug&go crowd? (In which case we would just need to use zenMINER as a firmware update site).
Cassey
While wireless devices are not supported in the launch release, we may be including support in a future release. In the meantime, for those of you who require wireless, you can always use an inexpensive wireless bridge device like the one found here -> http://www.amazon.com/Cisco-Linksys-WET11-Wireless-Ethernet-Bridge/dp/B000066JQU
Forgive me if I'm sounding ticked off, but learning the above plus seeing my shipment bounce all over the western US instead of coming fairly direct to me have combined to put me in a pretty foul mood atm. So....
Uhhh... that site says "2 new from $100" and, frankly, $100 isn't "inexpensive" in my books. As well, if I want to go that route I now have to order another part and wait for it to come! I sure wish I'd known about this before!
So, correct me if I'm wrong... since it appears I can't use zenminer unless I either string network cable or buy an (cough!) "inexpensive" bridge can I buy a cheap memory card, install the raspberry pi o/s and the GAW cgminer software and run the furys via wifi that way???
Thanks for your help...
Regards,
Chris
still cant register...
Just an FYI in case anyone else is experiencing it: I am having login problems at zenminer. Registered yesterday and activated my controller, set up pools, etc. Can't get logged in today. The login screen just sits there doing nothing, not complaining, not logging me in.
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
Yes but only in Firefox. I logged in no problem with Chrome.
Oh! Bless you! I'm in via Chrome!
While wireless devices are not supported in the launch release, we may be including support in a future release. In the meantime, for those of you who require wireless, you can always use an inexpensive wireless bridge device like the one found here -> http://www.amazon.com/Cisco-Linksys-WET11-Wireless-Ethernet-Bridge/dp/B000066JQU
Forgive me if I'm sounding ticked off, but learning the above plus seeing my shipment bounce all over the western US instead of coming fairly direct to me have combined to put me in a pretty foul mood atm. So....
Uhhh... that site says "2 new from $100" and, frankly, $100 isn't "inexpensive" in my books. As well, if I want to go that route I now have to order another part and wait for it to come! I sure wish I'd known about this before!
So, correct me if I'm wrong... since it appears I can't use zenminer unless I either string network cable or buy an (cough!) "inexpensive" bridge can I buy a cheap memory card, install the raspberry pi o/s and the GAW cgminer software and run the furys via wifi that way???
Thanks for your help...
Regards,
Chris
Does anyone know if zenMiner will work with the Zeus miners? I have one coming today and think it would be sweet if I could have my GAW Fury and Zeus Cyclone both on my Zen Controller.
Thanks!
Thanks!
The only miners currently supported are Gridseed and GAW Miners Generation A Miners, but we are rapidly rolling out support for additional hardware. Since your zenMiner Controller is a cloud-based device, as soon as we add support for a new miner, your controller will be good to go!
Just an FYI in case anyone else is experiencing it: I am having login problems at zenminer. Registered yesterday and activated my controller, set up pools, etc. Can't get logged in today. The login screen just sits there doing nothing, not complaining, not logging me in.
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
Yes but only in Firefox. I logged in no problem with Chrome.
Does anyone know if zenMiner will work with the Zeus miners? I have one coming today and think it would be sweet if I could have my GAW Fury and Zeus Cyclone both on my Zen Controller.
Thanks!
Thanks!
The only miners currently supported are Gridseed and GAW Miners Generation A Miners, but we are rapidly rolling out support for additional hardware. Since your zenMiner Controller is a cloud-based device, as soon as we add support for a new miner, your controller will be good to go!
Just an FYI in case anyone else is experiencing it: I am having login problems at zenminer. Registered yesterday and activated my controller, set up pools, etc. Can't get logged in today. The login screen just sits there doing nothing, not complaining, not logging me in.
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
I have e-mail support@zenminers and PMed their rep here.
Anyone else having similar problems?
Lordie! Could DHL send my furys to me in a more convoluted, slow way?!?!? Check this out...
I'm on Vancouver Island in western Canada, so the most logical route would be Hong Kong-->Vancouver-->me. Instead, DHL sends my shipment to bloody Los Angeles! And what's with this bounce between "arrive at sort facility, BC Canada" then "transferred through Seattle" then back to "processed for clearance, BC Canada" stuff?!?! Is my shipment in Vancouver or Seattle for crying out loud!
Regards,
Chris
I'm on Vancouver Island in western Canada, so the most logical route would be Hong Kong-->Vancouver-->me. Instead, DHL sends my shipment to bloody Los Angeles! And what's with this bounce between "arrive at sort facility, BC Canada" then "transferred through Seattle" then back to "processed for clearance, BC Canada" stuff?!?! Is my shipment in Vancouver or Seattle for crying out loud!
Regards,
Chris
Does anyone know if zenMiner will work with the Zeus miners? I have one coming today and think it would be sweet if I could have my GAW Fury and Zeus Cyclone both on my Zen Controller.
Thanks!
Thanks!
What?!?!? The controller can't use a usb wifi adapter?!?!?
Oh, crap! That means I have to string a pile of network cable.
Regards,
Chris
While wireless devices are not supported in the launch release, we may be including support in a future release. In the meantime, for those of you who require wireless, you can always use an inexpensive wireless bridge device like the one found here -> http://www.amazon.com/Cisco-Linksys-WET11-Wireless-Ethernet-Bridge/dp/B000066JQU
Outside of not being able to use a usb wifi adapter, the zenminer is up and running for me today.
What?!?!? The controller can't use a usb wifi adapter?!?!?
Oh, crap! That means I have to string a pile of network cable.
Regards,
Chris
My Fury was just delivered, about 2.5 hours after it hit town per the DHL site.
Things are a bit weird still over on zenminer. I registered yesterday and it found my controller... but now I can't get logged in. If I try and reregister it tells me my userid is taken. If I try to login via userid or e-mail, it just sits there - no error, no nothing. Running an activate does fine my controller though!
No worries! Please shoot an email to [email protected] so we can properly track and resolve your issue.
Same to anyone else that may be having issues, please email us so that we can ensure a streamlined resolution.
Jump to: