[GROUP BUY CLOS & SHIPPED] - ** GIVEAWAY ** BITMAIN AntMiner 180 GH/S 300 Units - page 3.

wallydz

newbie

Activity: 46

Merit: 0

Quote from: spiccioli on December 21, 2013, 07:11:01 AM

Quote from: wallydz on December 19, 2013, 03:57:59 AM

Quote from: painge on December 19, 2013, 02:00:08 AM

Is there an estimate of when we will see hosted units coming online?

Sushi told me 19th or 20th will be running

Hi wallydz,

are your units up and running?

spiccioli

nop !

spiccioli

legendary

Activity: 1378

Merit: 1003

nec sine labore

Quote from: wallydz on December 19, 2013, 03:57:59 AM

Quote from: painge on December 19, 2013, 02:00:08 AM

Is there an estimate of when we will see hosted units coming online?

Sushi told me 19th or 20th will be running

Hi wallydz,

are your units up and running?

spiccioli

knedle

member

Activity: 99

Merit: 10

Quote from: guytechie on December 21, 2013, 02:16:10 AM

I still haven't really mined with my Antminer since I got it on Dec 13 (page 16). I tested it but only got 130 GH due to the broken cable. My temp fix didn't work, and Radio Shack didn't have a replacement available. I stopped mining because I didn't want to void the warranty. Who knows if it would break other stuff without a proper cable. No word from Sushi on whether a replacement was sent. Sad

http://dec.imghost.us/rWlw.jpg

http://dec.imghost.us/rWmp.jpg

Please help, sushi!

Also any compensation for lost mining time? Difficulty is due to rise in 3 hours, and I also missed a good chunk of luck during the weeks I couldn't use the Antminer. Sad

Delivery was fast, I give you that, but I'm just sitting on a 4.25 BTC miner that's not mining for 7 days and counting.

PM also sent: just don't know what's the best way to get a response right now. Sad

I think your best option is to go to some electronics repair shop (one of those very obscure and dirty ones), and pay them 5$ to do it.

greaterninja

hero member

Activity: 924

Merit: 1000

Congratulations Sushi on selling out soo fast!!
If you guys are in USA and want to pre-order more AntMiner units then goto my thread:
**USA Customers only, maybe all of NA soon.
Batch quantity will be 100.

https://bitcointalksearch.org/topic/antminers4-1250-bitmains-official-partner-official-north-america-distributor-377632
OR
order on my website:
www.ninjatech.org

I hope to get another batch in hopefully less than 5-7 business days. Rest assured I will deliver ASAP once they arrive.

Very Respectfully,
GreaterNinja

wallydz

newbie

Activity: 46

Merit: 0

Dispointed in the end , HOsting option was not the best way to go get delay as hell with new difficulity today of 1181095141 more obstacle to make back the btc paid ....

guytechie

hero member

Activity: 677

Merit: 500

I still haven't really mined with my Antminer since I got it on Dec 13 (page 16). I tested it but only got 130 GH due to the broken cable. My temp fix didn't work, and Radio Shack didn't have a replacement available. I stopped mining because I didn't want to void the warranty. Who knows if it would break other stuff without a proper cable. No word from Sushi on whether a replacement was sent. Sad

http://dec.imghost.us/rWlw.jpg

http://dec.imghost.us/rWmp.jpg

Please help, sushi!

Also any compensation for lost mining time? Difficulty is due to rise in 3 hours, and I also missed a good chunk of luck during the weeks I couldn't use the Antminer. Sad

Delivery was fast, I give you that, but I'm just sitting on a 4.25 BTC miner that's not mining for 7 days and counting.

PM also sent: just don't know what's the best way to get a response right now. Sad

kmarei

newbie

Activity: 40

Merit: 0

Now that I missed gb2 cuz of the 4 days it took to buy the bitcoins
And I missed gb3 because they ran out of stock
Does anyone have antminers they want to sell?
Interested in buying 2-3 units, depending on price
Thanks!

madpoet

sr. member

Activity: 448

Merit: 250

Yeah since GB3 is closed and OOS I'd really like to know about the drawing

Bogart

legendary

Activity: 966

Merit: 1000

Received 3 of my ants on Wednesday, and the 4th yesterday (UPS had misplaced it). All running fine. Great execution. I wish all vendors operated like this.

So who won the giveaway?

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: just187 on December 20, 2013, 02:16:28 PM

Thanks guys ... i thought it would be the same as in cgminer, HW = Hardware Errors and Accepted = Accepted Shares ..

I have not overclocked and my Firmware is OpenWrt Barrier Breaker r38031 / LuCI Trunk (svn-r9909)

thanks

Here is a formula that giletto posted here to figure hardware error percentage.

HW/(HW+DiffA+DiffR)%

LOL. The poster above me beat me to posting. I was looking for the reference link.

ineedit

sr. member

Activity: 252

Merit: 250

Quote from: just187 on December 20, 2013, 02:06:26 PM

My miner arrived today, was shipped 2 days ago and its allready here. 2 Days from china to germany ... amazing.

I have allready set it up, but i have the feeling my hw are a bit to high? Do i read this wrong or does it mean i have 25% hardware errors? (ACCEPTED 1099 vs 195 HW Errors)

thanks to sushi for the perfect handeling so far .. i can only recommend this guy!

Your calculation is wrong it should be HW/(HW + DiffA + DiffR) or total shares with a hardware error divided by the total shares the unit has produced.

AbiTxGroup

sr. member

Activity: 447

Merit: 250

Quote from: guytechie on December 19, 2013, 02:37:52 PM

Quote from: guytechie on December 13, 2013, 01:45:51 PM

I just got mine! However, there was a bad wire (looks like it broke off the connector).

I hope they can just send me a replacement wire harness.

http://dec.imghost.us/rWlw.jpg

http://dec.imghost.us/rWmp.jpg

I'm definately not going to power it up or anything in case it damages the unit. Please help, sushi! Can't hash without it, lol.

Got mine since Dec 13 and I still haven't been able to use it properly due to the broken ribbon cable. Radio Shack does not any anything that would work. The temp fix is too temp... Wire would not make contact after a short while.

Lost a good window of luck at BTCGuild. Sad

Can't you remove the pin from the plug and recrimp/solder the wire back to the pin? The pin has a little tab that sticks out from the pin to catch on the connector to keep the pin in the connector. You need something with an inside diameter just a little larger than the pin to compress the tab and push the pin out. You may be able to bend the tab with a paperclip also. I am not at home atm, otherwise I would take some pics for you. For some examples using a molex connector, try searching google for "molex pin extractor". Most connectors are the same as these. I will check my antminer when I get home later to see.

BadAss.Sx

legendary

Activity: 1526

Merit: 1002

Bulletproof VPS/VPN/Email @ BadAss.Sx

Same FW as i have...no problem

just187

newbie

Activity: 37

Merit: 0

Thanks guys ... i thought it would be the same as in cgminer, HW = Hardware Errors and Accepted = Accepted Shares ..

I have not overclocked and my Firmware is OpenWrt Barrier Breaker r38031 / LuCI Trunk (svn-r9909)

thanks

BadAss.Sx

legendary

Activity: 1526

Merit: 1002

Bulletproof VPS/VPN/Email @ BadAss.Sx

Nothing wrong as far as i can see....Your DiffA is your accepted shares

pdawg

sr. member

Activity: 252

Merit: 250

What version is your firmware? They released a new version earlier this month. I updated to that and it seemed to do the trick. also, if you OC to 400Mhz, you will have HW error, that's normal.

just187

newbie

Activity: 37

Merit: 0

My miner arrived today, was shipped 2 days ago and its allready here. 2 Days from china to germany ... amazing.

I have allready set it up, but i have the feeling my hw are a bit to high? Do i read this wrong or does it mean i have 25% hardware errors? (ACCEPTED 1099 vs 195 HW Errors)

http://img89.imageshack.us/img89/3964/t51v.jpg

thanks to sushi for the perfect handeling so far .. i can only recommend this guy!

ducttape

newbie

Activity: 13

Merit: 0

My antminer arrived yesterday, was stuck for one day at customs. Had to pay about 40 euros. It has been mining for about a day now, works fine and it makes less noise than the bfl jalapeno next to it Wink

x0rcist

full member

Activity: 238

Merit: 100

Received my unit 2 days ago and had it running in no time. Now after 2 days full load mining i have to admit that it runs really smooth and don't get really hot (although it sometimes makes the noise of a plane leaving). Gonna mod it maybe with a more quit cooler but i must admit i didn't expect this quality!! Really good Sushi! Thanks.

PS. anyone know how to do a mod so i can change pools by accessing the cgminer API?

Xer0

hero member

Activity: 826

Merit: 1000

°^°

Quote from: 1am3r on December 20, 2013, 02:24:04 AM

Quote from: Xer0 on December 19, 2013, 07:46:35 PM

it leaving the customs \o/

How did you explain it to the customs in the end?
Or what kind of proof was valid for them?
I'm probably going to have the same problem... That's why I'm asking Wink

i sent them:
- transaction link
- gb thread link
- link to bitcoincharts
- screenshot of pms with sushi

it's on the truck now,
will see how much i have to pay

// just called them, and i will have to pay 500€
and that, folks, is why you dont forking write "125$" on a 4kg parcel with >200$ postage imported to GERMANY!!!

Topic: [GROUP BUY CLOS & SHIPPED] - ** GIVEAWAY ** BITMAIN AntMiner 180 GH/S 300 Units - page 3. (Read 37827 times)

Topic: [GROUP BUY CLOS & SHIPPED] - GIVEAWAY BITMAIN AntMiner 180 GH/S 300 Units - page 3. (Read 37827 times)